View all Harmony XB4
light block ZB4BV4 sold by 100Show more characteristics
ZB4BV4TQ has not been replaced. Please contact your customer care center for more information.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productHarmony XB4 product or component typeComplete body/light block assembly device short nameZB4 fixing collar materialZamak sale per indivisible quantity100 connections - terminalsScrew clamp terminals, <= 2 x 1.5 mm² with cable endScrew clamp terminals, >= 1 x 0.22 mm² without cable end light sourceIncandescent bulb baseBA 9s light block supplyVia integral transformer 1.2 VA 6 V [Us] rated supply voltage230...240 V AC at 50/60 Hz Complementary CAD overall width30 mm CAD overall height47 mm CAD overall depth60 mm terminals description ISO n°1(X1-X2)PL tightening torque0.8…1.2 N.m conforming to EN 60947-1 shape of screw headCross compatible with Philips no 1 screwdriverCross compatible with pozidriv No 1 screwdriverSlotted compatible with flat Ø 4 mm screwdriverSlotted compatible with flat Ø 5.5 mm screwdriver [Ui] rated insulation voltage600 V (pollution degree 3) conforming to EN 60947-1 [Uimp] rated impulse withstand voltage6 kV EN 60947-1 signalling typeSteady mounting of blockFront mounting electrical composition codeP4M9 Environment protective treatmentTH ambient air temperature for storage-40…70 °C ambient air temperature for operation-40…55 °C electrical shock protection classClass I conforming to IEC 60536 IP degree of protectionIP20 standardsEN/IEC 60947-5-5CSA C22.2 No 14EN/IEC 60947-5-1JIS C8201-5-1EN/IEC 60947-1EN/IEC 60947-5-4UL 508JIS C8201-1 product certificationsLROS (Lloyds register of shipping)DNVUL listedRINAGLCSABV vibration resistance5 gn (f= 2…500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Contractual warranty Warranty18 months
CertificateSizeAdd to My DocumentsXB4B XB5A Control and signaling units and ZBE ZBP ZBV ZBZ ZENL ZALV Electrical blocks (Version 1.0)
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)
Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board
Connection by Faston Connectors(1)Diameter on finished panel or support(2)40 mm min. / 1.57 in. min.(3)30 mm min. / 1.18 in. min.(4)Ø 22.5 mm / 0.89 in. recommended (Ø 22.3 mm 0+0.4 / 0.88 in. 0+0.016)(5)45 mm min. / 1.78 in. min.(6)32 mm min. / 1.26 in. min.