Main range of productHarmony XVM product or component typePre-assembled and pre-cabled beacon beacon or indicator bank unit type1 illuminated unit component nameXVM light sourceRed super bright LED with BA 15d base steady signalling light block colorRed [Us] rated supply voltage230 V AC indicator bank base typeBase with integrated buzzer mounting modeHorizontal Complementary kit compositionCoverPlastic fixing plateBase unit mounting diameter45 mm connections - terminalsFlying leads,clamping capacity: 1 x 0.325 mm² (AWG 22) markingCE mounting supportbase short-circuit protection0.2 A [Ui] rated insulation voltage250 V conforming to IEC 60947-1 nominal voltage limit0.85...1.1 Un conforming to IEC 60947-5-1 current consumption18 mA on base unit20 mA on flash discharge tube unit [Uimp] rated impulse withstand voltage4 kV IEC 60947-1 flashing frequency0.8 Hz fundamental frequency4 kHz net weight0.153 kg Environment IP degree of protectionIP54 horizontal position conforming to IEC 60529 product certificationsCCC standardsEN/IEC 60947-5-1EN/IEC 60947-1 ambient air temperature for storage-25…70 °C ambient air temperature for operation-10…50 °C overvoltage categoryClass II conforming to IEC 60947-1Class II conforming to IEC 60947-5-1Class II conforming to IEC 61140 protective treatmentTC noise level0…80 dB at 1 m Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CADSizeAdd to My DocumentsCAD file (on TraceParts) for XVMM2RSWSB: beacon with buzzer + 1 illuminated unit - Ø 45 mm - 230 V AC (Version 2.0)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsPre-Assembled and Pre-Cabled Tower Light with Fixing Base for Mounting on Horizontal Support (Plastic Fixing Plate)Dimensions
Below drawing shows a tower light with 3 illuminated stages. Select the number of stages according to the product characteristics in order to get b dimension.(1)Base unit with or without buzzer.
Number of illuminated units
b in mm
b in in.
Connections and SchemaPre-Assembled and Pre-Cabled Tower LightWire Colors
4th illuminated unit: yellow wire
3rd illuminated unit: green wire
2nd illuminated unit: white wire
1st illuminated unit: blue wire
Common: black wire
Buzzer (if integrated in base unit): grey wire
Technical DescriptionBase Unit with Integral BuzzerAdjustment of Audible Signal
View from above:(1)Volume adjustment potentiometer: 0 to 85 dB. Use either a cross headed or flat tipped screwdriver.(2)2-position selector for type of audible signal: continuous tone or intermittent tone