Main range of productHarmony XVM product or component typePre-assembled and pre-cabled beacon beacon or indicator bank unit type4 illuminated units component nameXVM light sourceGreen super bright LED with BA 15d base steady signallingOrange super bright LED with BA 15d base steady signallingRed super bright LED with BA 15d base steady signallingBlue super bright LED with BA 15d base steady signalling light block colorRed/orange/green/blue [Us] rated supply voltage230 V AC indicator bank base typeBase without buzzer mounting modeHorizontal Complementary kit compositionBase unitCoverPlastic fixing plate mounting diameter45 mm connections - terminalsFlying leads : 1 x 0.325 mm² AWG 22 markingCE mounting supportBase short-circuit protection0.2 A [Ui] rated insulation voltage250 V conforming to IEC 60947-1 nominal voltage limit0.85...1.1 Un conforming to IEC 60947-5-1 current consumption18 mA on base unit20 mA on flash discharge tube unit [Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-1 flashing frequency0.8 Hz fundamental frequency4 kHz Environment IP degree of protectionIP54 in horizontal position conforming to IEC 60529 product certificationsCCC standardsEN/IEC 60947-5-1EN/IEC 60947-1 ambient air temperature for storage-25...70 °C ambient air temperature for operation-10...50 °C overvoltage categoryClass II conforming to IEC 61140Class II conforming to IEC 60947-1Class II conforming to IEC 60947-5-1 protective treatmentTC noise level0...80 dB for 1 m Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsCAD file (on TraceParts) for XVMM2RAGBWSB: indicator bank without buzzer + 4 illuminated units - Ø 45 mm - 230 V AC (Version 2.0)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsPre-Assembled and Pre-Cabled Tower Light with Fixing Base for Mounting on Horizontal Support (Plastic Fixing Plate)Dimensions
Below drawing shows a tower light with 3 illuminated stages. Select the number of stages according to the product characteristics in order to get b dimension.(1)Base unit with or without buzzer.
Number of illuminated units
b in mm
b in in.
Connections and SchemaPre-Assembled and Pre-Cabled Tower LightWire Colors
4th illuminated unit: yellow wire
3rd illuminated unit: green wire
2nd illuminated unit: white wire
1st illuminated unit: blue wire
Common: black wire
Buzzer (if integrated in base unit): grey wire