Main range of productHarmony XVM product or component typePre-assembled and pre-cabled indicator bank beacon or indicator bank unit type3 illuminated units component nameXVM light sourceRed flash discharge tube flashing signallingGreen incandescent bulb with BA 15d base steady signalling <= 5 WOrange incandescent bulb with BA 15d base steady signalling <= 5 W light block colorOrange/green/red (flashing) [Us] rated supply voltage230 V AC indicator bank base typeBase with integrated buzzer mounting modeVertical Complementary kit compositionAluminium support tubeBase unitCoverPlastic fixing plate mounting diameter45 mm connections - terminalsFlying leads : 1 x 0.325 mm² AWG 22 markingCE mounting supportAluminium tube short-circuit protection0.2 A [Ui] rated insulation voltage250 V conforming to IEC 60947-1 nominal voltage limit0.85...1.1 Un conforming to IEC 60947-5-1 current consumption18 mA on base unit20 mA on flash discharge tube unit [Uimp] rated impulse withstand voltage4 kV conforming to IEC 60947-1 luminance650 cd/m² for incandescent bulb unit flashing frequency0.8 Hz, flash discharge tube unit fundamental frequency4 kHz product weight0.463 kg Environment IP degree of protectionIP54 in vertical position conforming to IEC 60529 product certificationsCCC standardsEN/IEC 60947-1EN/IEC 60947-5-1 ambient air temperature for storage-25...70 °C ambient air temperature for operation-10...50 °C overvoltage categoryClass I conforming to IEC 61140Class I conforming to IEC 60947-1Class I conforming to IEC 60947-5-1 protective treatmentTC noise level0...80 dB for 1 m Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CADSizeAdd to My DocumentsIndicator bank with 3 illuminated units + 250mm fixing base and bracket (Version 1.0)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsPre-Assembled and Pre-Cabled Tower Light with Fixing Base for Mounting on Vertical Support (Support Tube + Metal Bracket)Dimensions
Below drawing shows the maximum configuration of the product. Select the number of stages according to the product characteristics in order to get b2 dimension.(1)Base unit with or without buzzer.
Number of illuminated units
b2 in mm
b2 in in.
Connections and SchemaPre-Assembled and Pre-Cabled Tower LightWire Colors
4th illuminated unit: yellow wire
3rd illuminated unit: green wire
2nd illuminated unit: white wire
1st illuminated unit: blue wire
Common: black wire
Buzzer (if integrated in base unit): grey wire
Technical DescriptionBase Unit with Integral BuzzerAdjustment of Audible Signal
View from above:(1)Volume adjustment potentiometer: 0 to 85 dB. Use either a cross headed or flat tipped screwdriver.(2)2-position selector for type of audible signal: continuous tone or intermittent tone