XUM1APBNL2 is replaced by:
Add to My Products Remove from My Products
- Reason for Substitution: End of life
- Substitution date: 27 February 2008
Main range of productOsiSense XU series nameGeneral purpose single mode electronic sensor typePhoto-electric sensor sensor nameXUM sensor designMiniature detection systemReflex materialPlastic type of output signalDiscrete supply circuit typeDC wiring technique3-wire discrete output typePNP discrete output function1 NC electrical connectionCable cable length2 m product specific application- emissionInfrared reflex [Sn] nominal sensing distance4 m reflex need reflector XUZC50 Complementary enclosure materialPBT lens materialPMMA maximum sensing distance6 m reflex output typeSolid state wire insulation materialPVC status LED1 LED (red) for instability1 LED (yellow) for output state [Us] rated supply voltage12...24 V DC switching capacity in mA<= 100 mA (overload and short-circuit protection) switching frequency<= 500 Hz voltage drop<= 1.5 V (closed state) current consumption35 mA (no-load) delay first up30 ms delay response1 ms delay recovery1 ms setting-upWithout sensitivity adjustment depth27 mm height50 mm width12 mm product weight0.08 kg Environment product certificationsCECSAUL ambient air temperature for operation-25...55 °C ambient air temperature for storage-30...70 °C vibration resistance7 gn, amplitude = +/- 1.5 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 11 ms) conforming to IEC 60068-2-27 IP degree of protectionIP65 conforming to IEC 60529IP67 conforming to IEC 60529 Contractual warranty Warranty period18 months
Documents and DownloadsCADSizeAdd to My DocumentsOsiris Optimum - Miniature design three-wire - Ref. XUM1/5/6/9...L2 et XUM2...L2T/R (Version 1.0)CAD files for XUM1APBNL2: Photo-electric sensors OsiSense XU, miniature, reflex, Sn4m, DC, PNP (Version 1.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.