Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor device application- sensor nameXS1 sensor designCylindrical Ø 4 mm plain size29 mm body typeFixed detector flush mounting acceptanceFlush mountable materialMetal type of output signalDiscrete wiring technique3-wire [Sn] nominal sensing distance1 mm discrete output function1 NC output circuit typeDC discrete output typeNPN electrical connectionCable cable length5 m [Us] rated supply voltage5...24 V DC switching capacity in mA<= 100 mA with overload and short-circuit protection IP degree of protectionIP67 conforming to IEC 60529 Complementary detection faceFrontal front materialPPS enclosure materialNickel plated brass operating zone0...0.8 mm cable composition3 x 0.11 mm² wire insulation materialPvR status LED1 LED yellow for output state supply voltage limits5...30 V DC switching frequency<= 5000 Hz voltage drop<= 2 V at closed state current consumption<= 10 mA at no-load delay first up<= 5 ms delay response<= 1 ms delay recovery<= 1 ms markingCE threaded length0 mm height4 mm length28 mm product weight0.145 kg Environment product certificationsCSAUL ambient air temperature for operation-25...70 °C ambient air temperature for storage-40...85 °C vibration resistance25 gn amplitude = +/- 2 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 Offer Sustainability RoHS (date code: YYWW)Compliant - since 1104 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
Product environmental profileAvailable
End of Life Information
Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
Instruction sheetSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances in mm
Side by sidee (1) ≥2 mm/0.79 in.
Face to facee (2) ≥12 mm/0.47 in.
Facing a metal objecte (3) ≥3 mm/0.12 in.
Mounted in a metal supportd ≥4 mm/0.16 in.h ≥0 mm/0 in.
Tightening torque : 1.6 N.m. (values obtained with washers mounted)Mounting(1)Bending cable: 4 x external cable diameter
Connections and SchemaWiring Schemes
NPNBU :BlueBN :BrownBK :Black
Performance CurvesPerformance CurvesStandard Steel Target (mm) : 5x5x1Pick-up pointsDrop-out points (object approaching from the side)(y)Sensing distance in mm