Main range of productOsiSense XS series nameGeneral purpose sensor typeInductive proximity sensor sensor nameXS1 sensor designCylindrical M30 size68 mm body typeFixed enclosure materialNickel plated brass type of output signalDiscrete wiring technique3-wire [Sn] nominal sensing distance10 mm discrete output function1 NO discrete output typePNP electrical connection4 pins M12 male connector [Us] rated supply voltage12...24 V DC with reverse polarity protection switching capacity in mA<= 200 mA with overload and short-circuit protection IP degree of protectionIP67 conforming to IEC 60529 Complementary ISO threadM30 x 1.5 detection faceFrontal detector flush mounting acceptanceFlush mountable materialMetal front materialPBT operating zone0...8 mm differential travel1...15% of Sr output circuit typeDC status LED1 LED yellow for output state supply voltage limits10...36 V DC switching frequency<= 500 Hz voltage drop<= 2 V at closed state current consumption<= 10 mA at no-load delay first up<= 15 ms delay response<= 0.1 ms delay recovery<= 1 ms markingCE threaded length47 mm height30 mm length68 mm product weight0.075 kg Environment product certificationsULCSA ambient air temperature for operation-25...70 °C ambient air temperature for storage-40...85 °C vibration resistance25 gn amplitude = +/- 2 mm (f = 10...55 Hz) conforming to IEC 60068-2-6 shock resistance50 gn for 11 ms conforming to IEC 60068-2-27 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW)Compliant - since 0903 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product environmental profileAvailable
End of Life Information
Product end of life instructionsAvailable Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsXS1••AL/BL... and XS2••AL/BL... inductive proximity switches - CSA certificate of compliance (Version 1.0)XS1••BL... and XS2••BL... inductive proximity switches - LOVAG certificate of conformity (Version 1.0)Declaration of conformitySizeAdd to My DocumentsXS1••BL... and XS2••BL... inductive proximity switches - Supplier's declaration of conformity to Australian regulations (Version 1.0)End of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Mounting and ClearanceMinimum Mounting Distances
Side by sidee (1) ≥20 mm/0.79 in
Face to facee (2) ≥120 mm/4.72 in
Facing a metal objecte (3) ≥30 mm/1.18 in.
Connections and SchemaWiring Schemes
PNP1 :(+)2 :Not connected3 :(-)4 :NO Output
Performance CurvesPerformance CurvesStandard Steel Target : 30x30x1 mm(1)Pick-up points(2)Drop-out points (object approaching from the side)(y)Sensing distance in mm