Preventa module Cat.1 potential free NC/NC, NO/NC & PNP/PNP 24vac/dc screwShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productPreventa Safety automation product or component typePreventa safety module safety module nameXPSUAB safety module applicationFor application with safety switchover contactMonitoring antivalent contactsFor emergency stop, guard and light curtain monitoringFor electrical monitoring of two-hand control stations function of moduleMonitoring 1 PNP sensorRFID switchMonitoring of electro-sensitive protection equipment (ESPE)Emergency stop monitoring 1-channel wiringLight curtain monitoringMagnetic switch monitoringMonitoring two-hand control station type IIIAGuard monitoring 1-channel wiring safety levelCan reach PL c/category 1 conforming to ISO 13849-1Can reach SILCL 1 conforming to IEC 62061Can reach SIL 1 conforming to IEC 61508 safety reliability dataMTTFd >= 30 years conforming to ISO 13849-1Dcavg < 60 % conforming to ISO 13849-1PFHd = 1177E-09 1/h conforming to ISO 13849-1HFT = 0 conforming to IEC 62061PFHd = 1177E-09 1/h conforming to IEC 62061SFF > 60% conforming to IEC 62061HFT=0 conforming to IEC 61508-1PFHd = 1177E-09 1/h conforming to IEC 61508-1SFF > 60% conforming to IEC 61508-1Type = B conforming to IEC 61508-1 electrical circuit typeNC pairPNP pairOSSD pairAntivalent pair connections - terminalsRemovable spring terminal block 0.2...2.5 mm² solid or flexibleRemovable spring terminal block 0.25...2.5 mm² flexible with ferrule single conductorRemovable spring terminal block 0.2...1.5 mm² solid or flexible twin conductorRemovable spring terminal block 2 x 0.25...1 mm² flexible with ferrule without cable end, with bezelRemovable spring terminal block 2 x 0.5...1.5 mm² flexible with ferrule with cable end, with bezel [Us] rated supply voltage24 V AC - 15...10 %24 V DC - 20...20 % Complementary synchronisation time between inputs2.2 s0.5 s type of startAutomatic/manual/monitored power consumption in W1.5 W 24 V DC power consumption in VA3.5 VA 24 V AC 50/60 Hz input protection typeInternal, electronic safety outputs1 C/O safety inputs1 safety input 24 V DC 5 mA line resistance<= 60 Ohm input compatibilityNormally closed circuit conforming to ISO 14119XC limit switch conforming to ISO 14119Mechanical contact conforming to ISO 14119Normally closed circuit conforming to ISO 13850Antivalent pair conforming to ISO 14119OSSD pair conforming to IEC 61496-1-23-wire proximity sensors PNPTwo-hand control conforming to EN 574/ISO 13851-III A output typeRelay output : 250 V AC AC-1 D300Relay output : 250 V AC AC-15 D300Relay output : 24 V DC DC-1 R300Relay output : 24 V DC DC-13 R300 [Ie] rated operational current5 A AC-1 for normally open relay contact3 A AC-15 for normally open relay contact5 A DC-1 for normally open relay contact3 A DC-13 for normally open relay contact3 A AC-1 for normally closed relay contact1 A AC-15 for normally closed relay contact2 A DC-1 for normally closed relay contact1 A DC-13 for normally closed relay contact Control Outputs2 on/off pulsed output configurable input/output typeSemiconductor pulsed diagnostic output 24 V DC 20 mA Z1 not safety-related [Ith] conventional free air thermal current3 A associated fuse rating6 A gGFor relay output conforming to IEC 60947-1 minimum output current10 mAFor relay output minimum output voltage15 VFor relay output response time on input open<= 20 ms [Ui] rated insulation voltage250 V (pollution degree 2) conforming to EN/IEC 60947-1 [Uimp] rated impulse withstand voltage4 kV overvoltage category II conforming to EN/IEC 60947-1 local signallingPower ON: LED (green)Error: LED (red)Start: LED (yellow)Safety status: LED (yellow)Safety input S12: LED (yellow)Safety input S13: LED (yellow) mounting support35 mm symmetrical DIN rail depth120 mm ambient air temperature for operation-25...55 °C height100 mm width22.5 mm product weight0.2 kg Environment standardsIEC 60947-5-1IEC 61508-1 functional safety standardIEC 61508-2 functional safety standardIEC 61508-3 functional safety standardIEC 61508-4 functional safety standardIEC 61508-5 functional safety standardIEC 61508-6 functional safety standardIEC 61508-7 functional safety standardISO 13849-1 functional safety standardIEC 62061 functional safety standard product certificationsTÜVcULus IP degree of protectionIP40 (housing) conforming to EN/IEC 60529IP54 (mounting area) conforming to EN/IEC 60529IP20 (terminals) conforming to EN/IEC 60529 relative humidity5...95 % non-condensing Offer Sustainability RoHS (date code: YYWW) REACh
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.