Preventa safety remote input module - 16 I not isolatedShow more characteristics >
Main range of productPreventa Safety automation product or component typePreventa safety remote input module safety module nameXPSMF1 safety module applicationExtension of I/O capacity safety use categoryCategory 4 maximum conforming to EN 954-1Performance level e conforming to EN/ISO 13849-1SIL 3 conforming to EN/IEC 61508 function of moduleMonitoring safety detection discrete inputMonitoring safety dialogue discrete inputMonitoring short-circuit and line break remote line control output [Us] rated supply voltage24 V DC (- 15...20 %) supplySELV or PELV conforming to EN/IEC 60950 discrete input number16, not isolated number of outputs4 not isolated for line control outputs structure type10BASE-T/100BASE-TX Complementary response timeDepending on size of application voltage state 0 guaranteed<= 5 V for discrete input voltage state 1 guaranteed>= 15 V for discrete input current state 0 guaranteed1...1.5 mA, discrete input current state 1 guaranteed>= 2 mA, discrete input discrete input voltage19.2 V discrete input current40 mA input protection typeProtected against short-circuit output voltage20 V line control outputs nominal output current60 mA for line control outputs switching voltage7.5 V for discrete input switching time250 µs for discrete input communication port protocolSafe Ethernet with 2 RJ45 port(s), transmission rate: 100 Mbps, 10 Mbps, medium: dual twisted pair cable, category 5D or better exchange modeHalf duplex, full duplex, autonegotiation number of terminal blocks1 for discrete output1 for power supply4 for discrete input current consumption0.8 A at 24 V DC on power supply mounting support35 mm symmetrical DIN rail depth66.5 mm height109 mm width152 mm product weight0.7 kg Environment IP degree of protectionIP20 ambient air temperature for operation0...60 °C ambient air temperature for storage-40...85 °C conforming to EN 61131-2 Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
User guideSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
PresentationHousing ElementsFront View
Power supply input
IndicatorsTop ViewBottom View
Dimensions DrawingsDimensionsFront ViewSide View
Mounting and ClearanceMountingMinimum ClearancesAir Circulation
The height of the cable ducts is less than 40 mm / 1.57 in.
The height of the cable ducts is greater than 40 mm / 1.57 in.
L = H - 40 mm / 1.57 in.
L = length of the spacer
H = height of the cable duct
Minimum clearance when H > 40 mm/1.57 in. and no spacerMounting Precautions Relating to RJ45 Connector(1)minimum value