Main range of productOsiSense XM product or component typeElectronic pressure sensors pressure sensor typePressure transmitter pressure switch type of operationPressure switch with 2 switching outputs device short nameXMLR pressure sensor size8700 psi600 bar60 MPa maximum permissible accidental pressure150 MPa21750 psi1500 bar destruction pressure36250 psi2500 bar250 MPa controlled fluidFresh water (0...80 °C)Air (-20...80 °C)Hydraulic oil (-20...80 °C)Refrigeration fluid (-20...80 °C) fluid connection typeG 1/4A (male) conforming to DIN 3852-E [Us] rated supply voltage24 V DC SELV, voltage limits: 17...33 V Complementary current consumption<= 50 mA electrical connection4 pins M12 male connector type of output signalDiscrete discrete output typeSolid state PNP, 2 NO/NC programmable maximum switching current250 mA voltage drop<= 2 V adjustable range of switching point on rising pressure4.8...60 MPa48...600 bar696...8700 psi adjustable range of switching point on falling pressure30...582 bar435...8439 psi3...58.2 MPa minimum differential travel1.8 MPa18 bar261 psi materials in contact with fluid316L stainless steel front materialPolyester housing material316L stainless steelPolyacrylamide operating positionAny position, but disposals can falsified the measurement in case of upside down mounting protection typeShort-circuit protectionOvervoltage protectionOverload protectionReverse polarity response time on output<= 5 ms for discrete output switching output time delay0...50 s in steps of 1 second display type4 digits 7 segments local signalling2 LEDs yellow for light ON when switch is actuated display response time typeFast 50 msNormal 200 msSlow 600 ms delay first up<= 300 ms overall accuracy<= 1 % of the measuring range measurement accuracy on switching output<= 0.6 % of the measuring range repeat accuracy<= 0.2 % of the measuring range drift of the sensitivity+/- 0.03 % of measuring range/°C drift of the zero point+/- 0.1 % of measuring range/°C display accuracy<= 1 % of the measuring range mechanical durability>= 10000000 cycles depth42 mm height93 mm width41 mm product weight0.186 kg [Uimp] rated impulse withstand voltage0.5 kV DC electromagnetic compatibilityElectrostatic discharge immunity test - test level 8 kV air, 4 kV contact conforming to EN/IEC 61000-4-2Susceptibility to electromagnetic fields - test level 10 V/m (80...2000 MHz) conforming to EN/IEC 61000-4-3Electrical fast transient/burst immunity test - test level 2 kV conforming to EN/IEC 61000-4-4Surge immunity test - test level 1 kV conforming to EN/IEC 61000-4-5Immunity to conducted RF disturbances - test level 10 V (0.15...80 MHz) conforming to EN/IEC 61000-4-6 Environment markingCE product certificationscULusEAC standardsEN/IEC 61326-2-3UL 61010-1 ambient air temperature for operation-20...80 °C ambient air temperature for storage-40...80 °C IP degree of protectionIP65 conforming to EN/IEC 60529IP67 conforming to EN/IEC 60529 vibration resistance20 gn (f = 10...2000 Hz) conforming to EN/IEC 60068-2-6 shock resistance50 gn conforming to EN/IEC 60068-2-27
Documents and DownloadsLanguage
CertificateSizeAdd to My DocumentsXMLP... and XMLR... electronic pressure sensors - UL certification record (Version 1.0)XMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)XMLP... and XMLR... electronic pressure sensors - UL certification record (Version 1.0)XMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)XMLP... and XMLR... electronic pressure sensors - cUL certification record (for Canada) (Version 1.0)Instruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaConnections and SchemaConnector Wiring
Performance CurvesSwitching Output Description. Hysteresis Mode
The hysteresis switching mode is typically used for the “pumping and/or emptying applications”.X :TimeY :Pressure(1)OutputNP :Nominal PressureSP :Set point (adjustable from 8 % to 100 % NP)rP :Reset point (adjustable from 5 % to 97 % NP)Switching Output Description. Window Mode
The window switching mode is typically used for the “pressure regulation applications”X :TimeY :Pressure(1)OutputNP :Nominal pressureFH :High switching point (adjustable from 8 % to 100 % NP)FL :Low switching point (adjustable from 5 % to 97 % NP)Switching Output Description. Time Delay
The Time Delay is typically used to filter out the fast pressure transients.
The output only switches after a time “dS” and “dr” adjustable from 0 to 50 seconds.X :TimeY :Pressure(1)OutputSP :Set pointrP :Reset pointdS :Time delay on the set pointdr :Time delay on the reset point