Main range of productHarmony XB5 product or component typePilot light device short nameXB5 bezel materialDark grey plastic fixing collar materialPlastic head typeStandard mounting diameter22 mm sale per indivisible quantity1 shape of signaling unit headRound cap/operator or lens colourGreen operator additional informationWith plain lens light sourceIncandescent bulb baseBA 9s light block supplyVia integral transformer, 1.2 VA - 6 V light source colourGreen [Us] rated supply voltage110...120 V AC, 50/60 Hz [Us] rated supply voltage110...120 V AC, 50/60 Hz Complementary height42 mm width30 mm depth55 mm terminals description ISO n°1(X1-X2)PL product weight0.109 kg resistance to high pressure washer7000000 Pa at 55 °C,distance: 0.1 m connections - terminalsScrew clamp terminals : <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1Screw clamp terminals : 1 x 0.22...2 x 2.5 mm² without cable end conforming to EN/IEC 60947-1 [Ui] rated insulation voltage600 V (degree of pollution: 3) conforming to EN 60947-1 [Uimp] rated impulse withstand voltage6 kV conforming to EN 60947-1 signalling typeSteady device presentationComplete product Environment protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...55 °C electrical shock protection classClass II conforming to IEC 60536 overvoltage categoryClass II conforming to IEC 60536 IP degree of protectionIP69 conforming to IEC 60529IP69K conforming to ISO 20653IP66 conforming to IEC 60529IP67 conforming to IEC 60529 NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK05 conforming to IEC 50102 standardsJIS C 4520CSA C22.2 No 14EN/IEC 60947-5-1EN/IEC 60947-5-4EN/IEC 60947-1UL 508 product certificationsCSAUL listed vibration resistance5 gn (f = 12...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsXB4 XB5 ZBE ZEN ZBV ZAL ZB4 ZB5 ZBZ XD4 XD5 ZBY ZBC ZBD ZBG ZBP ZB2 Control and signaling units (Version 1.0)Instruction sheetSizeAdd to My DocumentsZB4..., ZB5... Mounting XB4 pushbuttons chromium plated metal bezel and XB5 plastic bezel with or without circular yellow legends ZBY9.2., Instruction Sheet (Version 12)Declaration of conformitySizeAdd to My DocumentsMarine certificateSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.a:43 mm / 1.69 in.b:30 mm / 1.18 in.c:41.5 mm / 1.63 in.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)