Main range of productHarmony XB5 product or component typeComplete potentiometer device short nameXB5 head typeStandard Complementary bezel materialDark grey plastic mounting diameter22 mm product compatibilityØ 6 mm shaft sale per indivisible quantity1 CAD overall width30 mm CAD overall height42 mm CAD overall depth82 mm product weight0.048 kg protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...70 °C electrical shock protection classClass II IEC 60536 IP degree of protectionIP66 IEC 60529 NEMA degree of protectionNEMA 13NEMA 4X resistance to high pressure washer7000000 Pa 55 °C 0.1 m IK degree of protectionIK03 IEC 50102 standardsEN/IEC 60947-1UL 508CSA C22.2 No 14 product certificationsBVCSAUL listed shape of signaling unit headRound operator profileKnurled knob with white [Us] rated supply voltage<= 30 V AC<= 42 V DC rated power in W1 W 70 °C precision of internal conversion resistor+-10% potentiometer characteristicLinear mechanical durability50000 cycles ohmic value4700 Ohm materialCermet vibration resistance5 gn 2...500 Hz IEC 60068-2-6 shock resistance30 gn 18 ms half sine wave acceleration IEC 60068-2-2750 gn 11 ms half sine wave acceleration IEC 60068-2-27 main groupPotentiometer group of productPotentiometer knurled knob colour of markingWhite compatibility codeXB5 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW)Compliant - since 0627 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product environmental profileAvailable Product end of life instructionsAvailable
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsInstruction sheetSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:Panel thickness: 1 mm to 6 mm / 0.03 in. to 0.24 in.
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Terminals or Plug-in ConnectorsConnection by Faston Connectors
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
1.26Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)