Main range of productHarmony XB5 product or component typeComplete manual overload reset push-button device short nameXB5 bezel materialPlastic fixing collar materialPlastic head typeStandard mounting diameter22 mm shape of signaling unit headRound operator profileBlue flush, white R activating distance17...120 mm Complementary height29 mm width29 mm depth120 mm product weight0.027 kg resistance to high pressure washer7000000 Pa at 55 °C,distance: 0.1 m operating travel10 mm customizableNo Environment protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...70 °C electrical shock protection classClass II conforming to IEC 60536 IP degree of protectionIP66 conforming to IEC 60529 NEMA degree of protectionNEMA 4X IK degree of protectionIK03 conforming to IEC 50102 standardsEN/IEC 60947-1 product certificationsUL listed Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsXB4 XB5 ZBE ZEN ZBV ZAL ZB4 ZB5 ZBZ XD4 XD5 ZBY ZBC ZBD ZBG ZBP ZB2 Control and signaling units (Version 1.0)Instruction sheetSizeAdd to My DocumentsZB4B..., ZB5A..., XB4B..., XB5A... Mounting XB4 pushbuttons chromium plated metal bezel and XB5 plastic bezel (Version 01)Declaration of conformitySizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensionse:clamping thickness: 1 to 6 mm / 0.04 to 0.24 in.(1)Actuation distance: see table below
Actuation distance in mm
Actuation distance in in.
36 to 145
1.42 to 5.71
145 to 255
5.71 to 10.04
Mounting and ClearancePanel Cut-out for Pushbuttons, Switches and Pilot Lights (Finished Holes, Ready for Installation)Connection by Screw Clamp Terminals or Plug-in Connectors or on Printed Circuit Board(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)
a in mm
a in in.
b in mm
b in in.
By screw clamp terminals or plug-in connector
By Faston connectors
On printed circuit board
1.18Detail of Lug Recess(1)Diameter on finished panel or support(2)For selector switches and Emergency stop buttons, use of an anti-rotation plate type ZB5AZ902 is recommended.(3)Ø22.5 mm recommended (Ø22.3 0+0.4) / Ø0.89 in. recommended (Ø0.88 in. 0+0.016)