Main range of productHarmony XALD product or component typeComplete control station device short nameXALD product destinationFor XB5 Ø 22 mm control and signalling units control station applicationStart-Stop function colour of base of enclosureLight grey RAL 7035 colour of coverDark grey RAL 7016 materialPolycarbonate operator profile2 flush push-buttons - 1 central pilot light operators descriptionGreen ''I'' 1 NO - red ''O'' 1 NC control station composition1 flush push-button green 1 NO I marking1 flush push-button red 1 NC O marking1 pilot light marking locationMarking on push-button contact operationSlow-break light sourceIntegrated and protected LED light source colourRed [Us] rated supply voltage24 V AC/DC Complementary cable entry2 knock-outs for cable entry, clamping capacity: 14 mm2 knock-outs for Pg 13 cable gland and ISO M20, clamping capacity: 12 mm product weight0.261 kg resistance to high pressure washer7000000 Pa at 55 °C, distance: 0.1 m colour of markingWhite marking when green, red or black capsBlack marking when white caps positive openingWith conforming to EN/IEC 60947-5-1 appendix K operating travel1.5 mm (NC changing electrical state)2.6 mm (NO changing electrical state)4.3 mm (total travel) operating force3.5 N (NC changing electrical state)3.8 N (NO changing electrical state) mechanical durability10000000 cycles connections - terminalsScrew clamp terminals : <= 2 x 1.5 mm² with cable end conforming to EN/IEC 60947-1Screw clamp terminals : >= 1 x 0.22 mm² without cable end conforming to EN/IEC 60947-1 tightening torque0.8...1.2 N.m conforming to EN/IEC 60947-1 shape of screw headCross, Philips no 1Cross, pozidriv No 1Slotted, flat Ø 4 mmSlotted, flat Ø 5.5 mm contacts materialSilver alloy (Ag/Ni) short-circuit protection10 A by gG cartridge fuse conforming to EN/IEC 60947-5-1 [Ith] conventional free air thermal current10 A conforming to EN/IEC 60947-5-1 [Ui] rated insulation voltage600 V (degree of pollution: 3) conforming to EN/IEC 60947-1 [Uimp] rated impulse withstand voltage6 kV conforming to EN/IEC 60947-1 [Ie] rated operational currentAC-15, A600: Ue = 120 V Ie = 6 A conforming to EN/IEC 60947-5-1AC-15, A600: Ue = 240 V Ie = 3 A conforming to EN/IEC 60947-5-1AC-15, A600: Ue = 600 V Ie = 1.2 A conforming to EN/IEC 60947-5-1DC-13, Q600: Ue = 125 V Ie = 0.55 A conforming to EN/IEC 60947-5-1DC-13, Q600: Ue = 250 V Ie = 0.27 A conforming to EN/IEC 60947-5-1DC-13, Q600: Ue = 600 V Ie = 0.1 A conforming to EN/IEC 60947-5-1 electrical durability1000000 cycles AC-15, 2 A at 230 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles AC-15, 3 A at 120 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles AC-15, 4 A at 24 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles DC-13, 0.2 A at 110 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C1000000 cycles DC-13, 0.5 A at 24 V, operating rate: <= 3600 cyc/h, load factor: 0.5 conforming to EN/IEC 60947-5-1 appendix C electrical reliabilityΛ < 10exp(-6) at 5 V, 1 mA conforming to EN/IEC 60947-5-4Λ < 10exp(-8) at 17 V, 5 mA conforming to EN/IEC 60947-5-4 signalling typeSteady supply voltage limits19.2...30 V DC21.6...26.4 V AC current consumption18 mA service life100000 h at rated voltage and 25 °C surge withstand1 kV conforming to IEC 61000-4-5 Environment protective treatmentTH ambient air temperature for storage-40...70 °C ambient air temperature for operation-40...70 °C overvoltage categoryClass II conforming to IEC 60536 IP degree of protectionIP69IP67IP66 conforming to IEC 60529IP69K NEMA degree of protectionNEMA 13NEMA 4X IK degree of protectionIK05 conforming to EN 50102 standardsCSA C22.2 No 14EN/IEC 60947-5-4EN/IEC 60947-5-5EN/IEC 60947-5-1JIS C 4520UL 508EN/IEC 60947-1 vibration resistance5 gn (12...500 Hz) conforming to IEC 60068-2-6 shock resistance30 gn (duration = 18 ms) for half sine wave acceleration conforming to IEC 60068-2-2750 gn (duration = 11 ms) for half sine wave acceleration conforming to IEC 60068-2-27 resistance to fast transients2 kV conforming to IEC 61000-4-4 resistance to electromagnetic fields10 V/m conforming to IEC 61000-4-3 resistance to electrostatic discharge6 kV on contact (on metal parts) conforming to IEC 61000-4-28 kV in free air (in insulating parts) conforming to IEC 61000-4-2 electromagnetic emissionClass B conforming to IEC 55011 Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsControl stations for Ø 22 control and signalling unitss, Start or Stop function, 2 spring return pushbuttons and 1 pilot light with integral red, indicating and marking on pushbutton (Version 1.1)Control stations for Ø 22 control and signalling unitss, three functions, 3 locations (Version 1.1)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(1)2 knock-outs for Pg 13.5 cable gland, maximum capacity 12 mm/0.47 in.(2)Knock-out for cable entry, maximum capacity 14 mm/0.55 in.
Control station fitted with:
c in mm
c in in.