Main range of productHarmony XAC product or component typePendant control station device short nameXACB Complementary enclosure materialGlass reinforced polyester electrical circuit typePower circuit enclosure typeReady for use enclosure control station applicationControl of single speed hoist motor control station composition4 push-buttons + 1 emergency stop control button typeEmergency stop push-button Ø 40 mm 3 NC trigger actionFirst push-button 3-pole raise, slowSecond push-button 3-pole lower, slowFourth push-button 3-pole left, slowThird push-button 3-pole right, slow product compatibilityXESD2201 for reversing operationXACS499 for emergency stop mechanical interlockingWith mechanical interlocking between pairs control station colourYellow connections - terminalsScrew clamp terminals, 1 x 2.5 mm² with or without cable endScrew clamp terminals, 2 x 1.5 mm² with or without cable end standardsEN/IEC 60947-5-1EN/IEC 60947-5-5EN/ISO 13850: 2006CSA C22.2 No 14EN/IEC 60204-32 product certificationsCSA protective treatmentTH ambient air temperature for operation-25…70 °C ambient air temperature for storage-40…70 °C vibration resistance15 gn (f= 10…500 Hz) conforming to IEC 60068-2-6 shock resistance100 gn conforming to IEC 60068-2-27 overvoltage categoryClass II conforming to IEC 61140 IP degree of protectionIP65 conforming to IEC 60529 IK degree of protectionIK08 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 10…22 mm [Ithe] conventional enclosed thermal current20 A [Ui] rated insulation voltageEmergency stop contact: 400 V (pollution degree 3) conforming to IEC 60947-1300 V conforming to CSA [Uimp] rated impulse withstand voltage6 kV conforming to IEC 60947-1 contact operationSnap action operating force32 N push-button40 N emergency stop short-circuit protection12 A fuse protection by cartridge fuse type aM rated power in hp3 hp at 240 V rated operational power in W3000 W at 240 V3000 W at 400 V electrical durability1000000 cycles AC-3, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A1000000 cycles AC-4, 3000 W at 400 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A700000 cycles AC-3, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A700000 cycles AC-4, 3000 W at 240 V, operating rate <10 cyc/mn, load factor = 0.4 conforming to IEC 60947-3 appendix A terminals description ISO n°1(63-64)NO(53-54)NO(73-74)NO(23-24)NO(13-14)NO(33-34)NO terminals description ISO n°2(31-32)NC(11-12)NC(21-22)NC terminal identifier(11-12)NC(13-14)NO net weight1.39 kg Offer Sustainability REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.