Main range of productHarmony XAC product or component typePendant control station device short nameXACB Complementary enclosure materialGlass reinforced polyester electrical circuit typePower circuit enclosure typeReady for use enclosure control station applicationControl of single speed hoist motor control station composition2 push-buttons + 1 emergency stop control button typeEmergency stop push-button Ø 40 mm 3 NC trigger actionFirst push-button 2-pole raise, slowSecond push-button 2-pole lower, slow product compatibilityXESD1191 for reversing operationXACS499 for emergency stop mechanical interlockingWith mechanical interlocking control station colourYellow connections - terminalsScrew clamp terminals 1 x 2.5 mm² with or without cable endScrew clamp terminals 2 x 1.5 mm² with or without cable end standardsEN/IEC 60204-32EN/IEC 60947-5-1EN/IEC 60947-5-5EN/ISO 13850: 2006CSA C22.2 No 14 product certificationsCSA protective treatmentTH ambient air temperature for operation-25...70 °C ambient air temperature for storage-40...70 °C vibration resistance15 gn 10...500 Hz IEC 60068-2-6 shock resistance100 gn IEC 60068-2-27 overvoltage categoryClass II IEC 61140 IP degree of protectionIP65 IEC 60529 IK degree of protectionIK08 mechanical durability1000000 cycles cable entryRubber sleeve with stepped entry 10...22 mm [Ithe] conventional enclosed thermal current12 A [Ui] rated insulation voltage400 V 3 IEC 60947-1 emergency stop contact600 V CSA [Uimp] rated impulse withstand voltage6 kV IEC 60947-1 contact operationSnap action operating force17 N push-button40 N emergency stop short-circuit protection<= 10 A fuse protection cartridge aM rated power in hp2 hp CSA 240 V3 hp CSA 600 V5 hp CSA 400 V rated operational power in W2200 W AC-3 240 V IEC 60947-3 appendix A2200 W AC-3 400 V IEC 60947-3 appendix A2200 W AC-4 240 V IEC 60947-3 appendix A2200 W AC-4 400 V IEC 60947-3 appendix A electrical durability300000 cycles AC-3 2200 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-3 2200 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-4 2200 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A300000 cycles AC-4 2200 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A500000 cycles AC-3 1500 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A500000 cycles AC-4 1500 W 240 V 10 cyc/mn 0.4 IEC 60947-3 appendix A800000 cycles AC-3 1500 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A800000 cycles AC-4 1500 W 400 V 10 cyc/mn 0.4 IEC 60947-3 appendix A terminals description ISO n°1(13-14)NO(23-24)NO(33-34)NO(43-44)NO terminals description ISO n°2(11-12)NC(21-22)NC(31-32)NC terminal identifier(11-12)NC(13-14)NO product weight0.94 kg Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Protective cable sleeves(1)Internal ø
Connections and SchemaControl of Single-Speed Reversing Motor 2-Phase Switching
With XESD1191 contact block, to be ordered separately
Combined with 3-pole isolating block XACS399 or XACS3991, shown in the unoperated position (pendant station “supplied”), fitted with key release trigger action latching Emergency stop operator.