TM258LF42DT4LS0

Modicon M258

Logic controller

For solutions

Applicatives functions blocks

42

4

12 for output
4 for fast output

10 for fast input
12 for input
4 for regular input

Sink for fast input
Sink for regular input
Source for input

24 V

DC

Current 0...20 mA
Current 4...20 mA
Voltage +/- 10 V

12 bits

>= 15 V for fast input
>= 15 V for fast output
>= 15 V for regular input

<= 5 V for fast input
<= 5 V for fast output
<= 5 V for regular input

4 mA for fast input
4 mA for regular input

6 kOhm for fast input
6 kOhm for regular input

0 ms for fast input/regular input and fast output
1.5 ms for fast input/regular input and fast output
12 ms for fast input/regular input and fast output
4 ms for fast input/regular input and fast output

2 µs...4 ms (configurable) fast input/regular input and fast output

30 m for fast input
30 m for fast output
30 m for regular input

500 Vrms AC

None

Source

24 V DC

19.2...28.8 V

4 mA for fast output

24 V DC for embedded expert modules power
24 V DC for I/O power segment
24 V DC for main supply

20.4...28.8 V

0.04 A for embedded expert modules power
0.31 A for main supply
10 A for I/O power segment

<= 100 kA during <= 70 s main supply
<= 25 kA during <= 500 s I/O power segment
<= 50 kA during <= 150 s embedded expert modules power
1.2 A during > 70 s main supply

<= 14.14 W

22 ns : Boolean

Flash 128 MB
Internal RAM 64 MB

With user calibration realtime clock, drift: <= 6 s/month
Without any user calibration realtime clock, drift: < 30 s/month at 25 °C

Variables of type retain and retain persistent CR2477M Renata, 1.5 years autonomy

1 CANopen male SUB-D 9, CANopen master
1 isolated serial link female RJ45, Ethernet Modbus TCP/IP slave (10BASE-T/100BASE-TX)
2 free slots PCI
1 isolated serial link female RJ45, Modbus master/slave RTU/ASCII or character mode ASCII (RS232/RS485), 300...115200 bps
1 isolated serial link mini B USB, 480 Mbit/s
1 isolated serial link USB type A, 480 Mbit/s

125 kbit/s for bus length of 500 m, CANopen
250 kbit/s for bus length of 250 m, CANopen
50 kbit/s for bus length of 1000 m, CANopen
500 kbit/s for bus length of 100 m, CANopen
10 kbit/s for bus length of 5000 m, CANopen
1000 kbit/s for bus length of 4 m, CANopen
20 kbit/s for bus length of 2500 m, CANopen
800 kbit/s for bus length of 25 m, CANopen

8 counting input(s) 200 kHz

1 LED per channel for I/O state
1 LED for CAN0 STS
1 LED for MBS COM
1 LED green/red for APP0
1 LED green/red for APP1
1 LED green/red for Eth NS (Ethernet network status)
1 LED green/red for Eth ST (Ethernet status)
1 LED green/red for RUN/MS (module status)
1 LED green/red for USB host
1 LED green/yellow for Eth LA (Ethernet activity)
1 LED red for BATT (battery status)

CE

Symmetrical DIN rail

237.5 mm

99 mm

85 mm

0.77 kg

CSA C22.2 No 213
IEC 61131-2
UL 508
CSA C22.2 No 142

cULus
C-Tick
GOST-R
CSA

0...55 °C without derating factor horizontal installation
0...60 °C with derating factor horizontal installation
0...50 °C vertical installation

-25...70 °C

5...95 % without condensation

IP20 conforming to IEC 61131-2

2 conforming to IEC 60664

0...2000 m

0...3000 m

1 gn 8.4...150 Hz DIN rail
3.5 mm 5...8.4 Hz DIN rail

15 gn for 11 ms

4 kV on contact conforming to EN/IEC 61000-4-2
8 kV in air conforming to EN/IEC 61000-4-2

1 V/m 2...2.7 GHz conforming to EN/IEC 61000-4-3
10 V/m 80...2000 MHz conforming to EN/IEC 61000-4-3

1 kV I/O conforming to EN/IEC 61000-4-4
1 kV shielded cable conforming to EN/IEC 61000-4-4
2 kV power lines conforming to EN/IEC 61000-4-4

0.5 kV differential mode conforming to EN/IEC 61000-4-5
1 kV common mode conforming to EN/IEC 61000-4-5

CISPR 11

Schneider Electric declaration of conformity

Reference not containing SVHC above the threshold

18 months