Main Range of productLexium TAS Product or component typeLinear table Product specific applicationFor 1 direction Load positionOn carriage Drive typeBall screw Guide typeTwin ball Complementary Operating positionHorizontal Function availableDifferent types of motor mounting Distance per revolution5 mm Diameter12 mm for ball screw: Axial backlash0.04 mm for ball screw Operating force1720 N for Fy2155 N for Fz positive2155 N for Fz negative800 N for Fx Maximum speed0.25 m/s Acceleration2 m/s² Max. drive torque0.9 N.m Max. torque<48 N.m for Mx <90 N.m for My <72 N.m for Mz Min. … Max. stroke7…600 mm Repeat accuracy+/- 0.02 mm Outer dimension100 x 39 mm Service life10000 km Contractual warranty Warranty18 months
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsDimensions(2)LP : total length of axis. Length rounded down to the nearest whole number. Using the example of a Lexium TAS 41 linear table and a desired stroke of 500 mm / 19.68 in. : LP = 205 mm / 8.07 in. + (500 mm / 19.68 in. x 1.38532) = 897.66; 897.66 rounded down to the nearest whole number gives LP = 897 mm / 35.31 in.(3)LC : length of carriage(4)X : stroke, depending on application
= (LP - 163 mm / 6.42 in. - X)/2
= 205 mm / 8.07 in. + (X multiplied by 1.38532)
Technical DescriptionForces and Torques Exerted on the Lexium TAS Linear TablePossible Types of Interface for the Drive Element and Motor OrientationsMotor in the Table Axis, Driven DirectlyMotor Above Table, Driven by BeltMotor Below Table, Driven by BeltMotor to Left of Table, Driven by BeltMotor to Right of Table, Driven by BeltWith Shaft (Without Connection, Without Motor)