servo motor SH3 070 2,2Nm,key,multi,nobrake,str.conn,IP54/IP65,8k RPMShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range compatibilityPacDrive 3 product or component typeServo motor device short nameSH3.....M Complementary maximum mechanical speed8000 rpm [Us] rated supply voltage115...480 V network number of phasesThree phase continuous stall current1.5 A continuous stall torque2.2 N.m at 115...480 V three phase peak stall torque7.6 N.m at 115...480 V three phase nominal output power700 W at 115 V three phase340 W at 230 V three phase660 W at 400 V three phase780 W at 480 V three phase nominal torque2.15 N.m at 230 V three phase2.1 N.m at 400 V three phase2.07 N.m at 480 V three phase2.2 N.m at 115 V three phase nominal speed750 rpm at 115 V three phase1500 rpm at 230 V three phase3000 rpm at 400 V three phase3600 rpm at 480 V three phase maximum current Irms6 A shaft endParallel key shaft diameter11 mm shaft length23 mm key width4 mm IP degree of protectionIP54 (shaft bushing without shaft seal ring) conforming to EN/IEC 60034-5IP65 (motor) conforming to EN/IEC 60034-5IP65 (shaft bushing) conforming to EN/IEC 60034-5 encoder typeAbsolute multiturn SinCos Hiperface speed feedback resolution128 periods holding brakeWithout holding torque2 N.m mounting supportInternational standard flange motor flange size70 mm electrical connectionStraight connector torque constant1.47 N.m/A at 120 °C back emf constant95.9 V/krpm at 20 °C number of motor poles3 rotor inertia0.41 kg.cm² stator resistance16.4 Ohm stator inductance115.7 mH maximum radial force Fr390 N at 6000 rpm410 N at 5000 rpm450 N at 4000 rpm490 N at 3000 rpm560 N at 2000 rpm710 N at 1000 rpm maximum axial force Fa80 N type of coolingNatural convection length187 mm centring collar diameter60 mm centring collar depth2.5 mm number of mounting holes4 mounting holes diameter5.5 mm circle diameter of the mounting holes82 mm product weight2.8 kg Contractual warranty Warranty period18 months
Documents and DownloadsCADSizeAdd to My DocumentsCAD file (on TraceParts) for SH30702M12A1000: servo motor SH3 070 2,2Nm,key,multi,nobrake,str.conn,IP54/IP65,8k RPM (Version 2.0)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.