servo motor SH3 040 0,21Nm,no key,single,no brake,90°conn,IP54/IP65,9k RPMShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range compatibilityPacDrive 3 product or component typeServo motor device short nameSH3.....P Complementary maximum mechanical speed9000 rpm [Us] rated supply voltage115...480 V network number of phasesThree phase continuous stall current1.12 A continuous stall torque0.21 N.m at 115...480 V three phase continuous power220 W peak stall torque0.8 N.m at 480 V three phase nominal output power77 W at 115 V three phase77 W at 230 V three phase166 W at 400 V three phase166 W at 480 V three phase nominal torque0.176 N.m at 115 V three phase0.176 N.m at 230 V three phase0.184 N.m at 400 V three phase0.184 N.m at 480 V three phase nominal speed9000 rpm at 480 V three phase4000 rpm at 115 V three phase9000 rpm at 400 V three phase4000 rpm at 230 V three phase maximum current Irms4.7 A shaft endSmooth shaft shaft diameter8 mm shaft length25 mm IP degree of protectionIP54 (shaft bushing without shaft seal ring) conforming to EN/IEC 60034-5IP65 (motor) conforming to EN/IEC 60034-5IP65 (shaft bushing) conforming to EN/IEC 60034-5 encoder typeAbsolute single turn SinCos Hiperface speed feedback resolution16 periods holding brakeWithout mounting supportInternational standard flange motor flange size40 mm electrical connectionRotatable right angled connector torque constant0.19 N.m/A at 120 °C back emf constant13.6 V/krpm at 20 °C number of motor poles5 rotor inertia0.0232 kg.cm² stator resistance17.2 Ohm stator inductance14.6 mH stator electrical time constant0.85 ms at 20 °C type of coolingNatural convection length73.4 mm centring collar diameter30 mm centring collar depth2.5 mm number of mounting holes4 mounting holes diameter4.5 mm circle diameter of the mounting holes46 mm product weight0.4 kg Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD file (on TraceParts) for SH30401P06A2000: servo motor SH3 040 0,21Nm,no key,single,no brake,90°conn,IP54/IP65,9k RPM (Version 2.0)CertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.