Welcome to the Schneider Electric corporate Website

ENGLISH | FRENCH

You can choose another country to view available products or go to our Global website for company information.

Choose your country or region

Schneider Electric SD328BU68S2 Image

Range: Lexium SD3 & Motors

Stepper motor drives

SD328BU68S2

Schneider Electric SD328BU68S2 Image
Range: Lexium SD3 & Motors

Stepper motor drives

SD328BU68S2

motion control stepper motor drive - SD328 - Profibus DP fieldbus - <= 6.8 A

Show more characteristics >
Add to My Products Remove from My Products

  • Main
    range of product
    Lexium SD3
    product or component type
    Motion stepper drive
    device short name
    SD328
    supply voltage limits
    100...120 V
    200...240 V
    bus type
    Fieldbus
    Complementary
    format of the drive
    Block
    network number of phases
    Single phase
    [Us] rated supply voltage
    100...120 V (- 15...10 %)
    200...230 V (- 15...10 %)
    supply voltage type
    AC/DC
    network frequency limits
    50...60 Hz (- 15...10 %)
    communication interface
    Integrated Profibus DP fieldbus
    motor phase current
    <= 6.8 A
    current consumption
    <= 0.2 mA (24 V control voltage)
    5 A at 230 V (main supply)
    7 A at 115 V (main supply)
    nominal power
    280 W at 115 V
    420 W at 230 V
    short-circuit current
    0.5 kA
    power losses
    <= 65 W
    associated fuse rating
    10 A at 115 V
    6 A at 230 V
    overvoltage category
    III
    inrush current
    < 60 A
    leakage current
    < 30 mA 10 m conforming to IEC 60990-3
    voltage state 0 guaranteed
    -3...5 V (24 V input signals)
    voltage state 1 guaranteed
    15...30 V (24 V input signals)
    input current
    <= 10 mA (24 V input signals)
    input frequency
    <= 200 kHz, signal input ENC_A, ENC_B, ENC_I, pulse/direction
    <= 400 kHz, signal input ENC_A, ENC_B, ENC_I, A/B
    output frequency
    < 400 kHz, pulse/direction interface, A/B
    <= 200 kHz, pulse/direction interface, pulse/direction
    maximum switching current
    <= 50 mA (24 V output signals)
    voltage drop
    1 V, 50 mA load (24 V output signals)
    physical interface
    RS422 - pulse/direction interface
    RS422 - signal input ENC_A, ENC_B, ENC_I
    output voltage
    <= 30 V (24 V output signals)
    4.75...5.25 V (ENC+5V_OUT signal output)
    input voltage
    24 V -15 %/+20 % (24 V control voltage)
    residual ripple
    < 5 % (24 V control voltage)
    resistance
    5 kOhm (pulse/direction interface)
    safety function
    Safe torque off safety function for machine conforming to IEC/EN 61800-5-2
    Safe torque off safety function for machine conforming to ISO 13849-1 level d
    Safe torque off safety function for system process conforming to EN/IEC 61508 level SIL2
    Safe torque off safety function for system process conforming to IEC/EN 61800-5-2
    type of cooling
    Fan
    maximum mechanical speed
    3000 rpm
    height
    145 mm
    width
    72 mm
    depth
    140 mm
    shock resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
    product weight
    1.2 kg
    Environment
    electromagnetic compatibility
    Electrostatic discharge level 3 conforming to EN/IEC 61000-4-2
    Immunity to electrical transients level 4 conforming to EN/IEC 61000-4-4
    Immunity to radiated radio-electrical interference level 3 conforming to EN/IEC 61000-4-3
    Voltage/current impulse level 3 conforming to EN/IEC 61000-4-5
    standards
    EN/IEC 50178
    EN/IEC 61800-3
    EN/IEC 61800-3 environment 1
    EN/IEC 61800-3 environment 2
    EN/IEC 61800-5-1
    product certifications
    CUL
    TÜV
    UL
    marking
    CE
    ambient air temperature for operation
    0...50 °C
    ambient air temperature for storage
    -25...70 °C
    pollution degree
    Level 2
    relative humidity
    5...85 % without condensation
    operating altitude
    <= 1000 m without derating
    > 1000...< 2000 m without derating (maximum ambient temperature 40°C, no protective film, lateral distance of > 50mm)
    vibration resistance
    1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
    1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    IP degree of protection
    IP20
    IP40 on upper part without removal of protective film
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    REACh
    Product environmental profile
    Product end of life instructions
    Available
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    • French
    • German
    Software - Released
    Date
    Size
    Add to My Documents
    Date 12/14/17
    Size 4.5 KB
    User guide
    Date
    Size
    Add to My Documents
    Date 12/14/17
    Size 2.1 MB
    CAD
    Date
    Size
    Add to My Documents
    Date 12/13/11
    Size 466.8 KB
    Certificate
    Date
    Size
    Add to My Documents
    Date 8/21/18
    Size 746 KB
    Declaration of conformity
    Date
    Size
    Add to My Documents
    Date 8/21/18
    Size 137.5 KB
    Product environmental
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    Dimensions


    EMC mounting plate (included)



  • Mounting and Clearance

    Mounting and Clearance


    Ambient temperature

    Mounting distances

    Mounting recommendations

    Without protective film (1)

    With protective film

    0 ... +40 °C

    d > 50 mm/1.97 in.

    None

    None

    d > 50 mm/1.97 in.

    None

    d > 10 mm/0.39 in.

    +40 ... +50 °C

    d > 50 mm/1.97 in.

    None

    Reduce nominal and continuous current by 2.2 % per °C above 40 °C

    d > 50 mm/1.97 in.

    Reduce nominal and continuous current

    Operation not possible

    (1) Recommendation: remove protective film after installation.


  • Connections and Schema

    SD328B Connection Example with Fieldbus Control



    Example of Application of the Safety Function: Category 0 Stop



    Example of Application of the Safety Function: Category 1 Stop