Main range of productZelio Relay series nameMiniature product or component typePlug-in relay device short nameRXM coil interference suppressionWithout utilisation coefficient20 % sale per indivisible quantity10 Complementary contact operationStandard [Uc] control circuit voltage230 V AC 50/60 Hz [Ithe] conventional enclosed thermal current5 A at -40...55 °C status LEDWithout control typeWithout push-button [Ui] rated insulation voltage250 V conforming to IEC [Uimp] rated impulse withstand voltage3.6 kV (1.2/50 µs) conforming to IEC 61810-7 contacts materialSilver alloy (Ag/Ni) [Ie] rated operational current5 A (AC-1/DC-1) NO conforming to IEC2.5 A (AC-1/DC-1) NC conforming to IEC minimum switching current10 mA maximum switching voltage250 V AC250 V DC minimum switching voltage17 V load current5 A at 250 V AC5 A at 28 V DC maximum switching capacity1250 VA network: AC140 W network: DC minimum switching capacity170 mW operating rate<= 18000 cycles/hour no-load<= 1200 cycles/hour under load mechanical durability10000000 cycles electrical durability100000 cycles for resistive load average coil consumption in VA1.2 AC drop-out voltage thresholdAC : >= 0.15 Uc operating time20 ms between coil de-energisation and making of the Off-delay contact20 ms between coil energisation and making of the On-delay contact average resistance15000 Ohm network: AC at 20 °C +/- 15 % rated operational voltage limits184...253 V AC protection categoryRT I test levelsLevel A group mounting operating positionAny position CAD overall width21 mm CAD overall height27 mm CAD overall depth46 mm safety reliability dataB10d = 100000 Environment dielectric strength2000 V AC between coil and contact2000 V AC between poles1000 V AC between contacts standardsRoHS compliantEN/IEC 61810-1 (iss. 2)CE ambient air temperature for storage-40...85 °C ambient air temperature for operation-40...55 °C vibration resistance3 gn, amplitude = +/- 1 mm (f= 10...50 Hz) operating conforming to EN/IEC 60068-2-66 gn, amplitude = +/- 1 mm (f= 10...50 Hz) not operating conforming to EN/IEC 60068-2-6 IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn for opening conforming to EN/IEC 60068-2-275 gn for closing conforming to EN/IEC 60068-2-27 Offer Sustainability Sustainable offer statusGreen Premium product Product environmental profileAvailable
Product Environmental Profile
Product end of life instructionsNeed no specific recycling operations Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Pin Side View
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of ContactsDurability (inductive load) = durability (resistive load) x reduction coefficient.
For 2 Poles RelayX :Contact current (A)Y :Durability (Number of operating cycles)A :Inductive loadB :Resistive load
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.Maximum Switching Capacity
For 2 Poles RelayX :Contact voltage (v)Y :Contact current (A)A :Inductive AC loadB :Resistive AC loadC :Inductive DC loadD :Resistive DC load
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.