Main range of productZelio Relay series nameInterface relay product or component typePlug-in relay device short nameRSB contacts type and composition1 C/O contact operationStandard [Uc] control circuit voltage12 V DC [Ithe] conventional enclosed thermal current16 A at -40...40 °C status LEDWithout control typeWithout push-button sale per indivisible quantity10 Complementary shape of pinFlat (PCB type) average coil resistance360 Ohm (AC) at 20 °C +/- 10 % [Ue] rated operational voltage8.4...18 V DC [Ui] rated insulation voltage400 V conforming to EN/IEC 60947 [Uimp] rated impulse withstand voltage3.6 kV conforming to IEC 61000-4-5 contacts materialSilver alloy (AgNi) [Ie] rated operational current16 A, NO (AC-1/DC-1) conforming to IEC8 A, NC (AC-1/DC-1) conforming to IEC minimum switching current100 mA maximum switching voltage250 V DC conforming to IEC minimum switching voltage5 V maximum switching capacity4000 VA/448 W resistive rated load16 A at 250 V AC16 A at 28 V DC minimum switching capacity500 mW at 100 mA / 5 V operating rate<= 600 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability30000000 cycles electrical durability100000 cycles (16 A at 250 V, AC-1) NO100000 cycles (8 A at 250 V, AC-1) NC operating time20 ms operating10 ms reset average coil consumption0.45 W DC drop-out voltage threshold>= 0.1 Uc DC safety reliability dataB10d = 100000 protection categoryRT I operating positionAny position product weight0.014 kg device presentationComplete product Environment dielectric strength1000 V AC between contacts2500 V AC between poles5000 V AC between coil and contact standardsUL 508EN/IEC 61810-1CSA C22.2 No 14 product certificationsULCSAEAC ambient air temperature for storage-40...85 °C vibration resistance+/- 1 mm (f = 10...55 Hz) conforming to EN/IEC 60068-2-6 IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn for11 ms not operating conforming to EN/IEC 60068-2-275 gn for11 ms in operation conforming to EN/IEC 60068-2-27 ambient air temperature for operation-40...85 °C (DC) Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.
Connections and SchemaWiring Diagram(1)Before wiring please refer to the Instruction sheet
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.