Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPM contacts type and composition2 C/O [Uc] control circuit voltage230 V AC [Ithe] conventional enclosed thermal current15 A at -40…55 °C status LEDWith control typeLockable test button utilisation coefficient20 % Complementary shape of pinFlat [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to CSA300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV during 1.2/50 µs contacts materialAgNi [Ie] rated operational current15 A at 277 V (AC) conforming to UL15 A at 28 V (DC) conforming to UL15 A at 250 V (AC) NO conforming to IEC15 A at 28 V (DC) NO conforming to IEC7.5 A at 250 V (AC) NC conforming to IEC7.5 A at 28 V (DC) NC conforming to IEC maximum switching voltage250 V conforming to IEC Resistive load current15 A at 250 V AC15 A at 28 V DC maximum switching capacity3750 VA420 W minimum switching capacity170 mW at 10 mA, 17 V operating rate<= 1200 cycles/hour under load<= 18000 cycles/hour no-load mechanical durability10000000 cycles electrical durability100000 cycles for resistive load Average coil consumption in VA1.1 at 60 Hz drop-out voltage threshold>= 0.15 Uc AC Operate time20 ms at nominal voltage Release time20 ms at nominal voltage Average coil resistance16270 Ohm at 20 °C +/- 15 % rated operational voltage limits184...253 V AC protection categoryRT I test levelsLevel A group mounting operating positionAny position pollution degree3 safety reliability dataB10d = 100000 net weight0.036 kg device presentationComplete product Environment dielectric strength1500 V AC between contacts with micro disconnection2000 V AC between coil and contact with reinforced2000 V AC between poles with basic standardsCSA C22.2 No 14UL 508EN/IEC 61810-1 product certificationsCSAREACHRoHSULEAC ambient air temperature for storage-40…85 °C ambient air temperature for operation-40…55 °C vibration resistance3 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles in operation5 gn, amplitude = +/- 1 mm (f = 10…150 Hz)5 cycles not operating Degree of protection (Housing only)IP40 conforming to EN/IEC 60529 shock resistance15 gn for in operation30 gn for not operating Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation REACh free of SVHCYes EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Toxic heavy metal freeYes Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity ProfileNo need of specific recycling operations WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins Contractual warranty Warranty18 months
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for RPM22P7: power plug-in relay - Zelio RPM - 2 C/O - 230 V AC - 15 A - with LED (Version 1.0)CAD file (on TraceParts) for RPM22P7: power plug-in relay - Zelio RPM - 2 C/O - 230 V AC - 15 A - with LED (Version 2.0)CertificateSizeAdd to My DocumentsUL Recognized RPF, RSL1, RPM, RSB, RUMC, RUMF, RXM (Version 1.0)Declaration of conformitySizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Pin Side View
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of Contacts
Durability (inductive load) = durability (resistive load) x reduction coefficient.
Resistive AC loadXSwitching capacity (kVA)YDurability (Number of operating cycles)
Reduction coefficient for inductive AC load (depending on power factor cos ϕ)YReduction coefficient (A)
Maximum switching capacity on resistive DC loadXVoltage DCYCurrent DC
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.