Main range of productZelio Relay series namePower product or component typePlug-in relay device short nameRPF contacts type and composition2 C/O [Uc] control circuit voltage24 V AC control typeWithout lockable test button shape of pinFlat contacts materialSilver tin oxide [Ithe] conventional enclosed thermal current25 A at -40...55 °C for relays side by side without a gap30 A at -40...55 °C for 13 mm gap between two relays Resistive rated load25 A at 28 V DC30 A at 250 V AC utilisation coefficient10 % Complementary mounting supportDIN railPanel control circuit voltage limits19.2...26.4 V [Ie] rated operational current30 A at 250 V AC (for NO) conforming to IEC30 A at 277 V AC (for NO) conforming to UL20 A at 28 V DC (for NO) conforming to UL3 A at 250 V AC (for NC) conforming to IEC3 A at 28 V DC (for NC) conforming to IEC3 A at 277 V AC (for NC) conforming to UL3 A at 28 V DC (for NC) conforming to UL25 A at 28 V DC (for NO) conforming to IEC [Ui] rated insulation voltage250 V conforming to IEC300 V conforming to UL [Uimp] rated impulse withstand voltage4 kV 1.2/50 µs maximum switching voltage250 V conforming to IEC maximum switching capacity7500 VA/700 W Minimum recommended switching capacity6000 mW (500 mA / 12 V) for NO170 mW (10 mA / 6 V) for NC operating rate<= 18000 cycles/hour no-load<= 1200 cycles/hour under load mechanical durability5000000 cycles electrical durability100000 cycles for resistive load Average coil consumption4 VA at 60 Hz drop-out voltage threshold>= 0.15 Uc Operate time25 ms Release time25 ms average resistance170 Ohm (tolerance +/- 15 %) at 20 °C safety reliability dataB10d = 100000 protection categoryRT II test levelsLevel A group mounting operating positionAny position product weight0.082 kg device presentationComplete product Environment dielectric strength2000 V AC between poles with basic insulation1500 V AC between contacts with micro disconnection insulation4000 V AC between coil and contact with reinforced insulation standardsEN/IEC 61810-1CSA C22.2 No 14UL 508 product certificationsCEGOSTULCSA ambient air temperature for storage-40...85 °C ambient air temperature for operation-40...55 °C vibration resistance3 gn (+/- 1 mm, f = 10...150 Hz) 5 cycles in operation10 gn (+/- 1 mm, f = 10...150 Hz) 5 cycles not operating IP degree of protectionIP40 conforming to EN/IEC 60529 shock resistance10 gn in operation30 gn not operating pollution degree3 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsNeed no specific recycling operations Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsCADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsUL LISTED Certificate RPM, RUMC, RUMF, RXM, RPF (Version 1.0)Declaration of conformitySizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Connections and SchemaWiring Diagram
Symbols shown in blue correspond to Nema marking.
Performance CurvesElectrical Durability of ContactsAC Resistive loadXSwitching capacity (kVA)YDurability (number of operating cycles)AC Reduction coefficient for inductive load (depending on power factor cos ϕ)
Durability (inductive load) = durability (resistive load) x reduction coefficient.Yreduction coefficientMaximum switching capacity on DC resistive loadA30 AB25 A
Note : These are typical curves, actual durability depends on load, environment, duty cycle, etc.