Main range of productZelio Control product or component typeModular measurement and control relays relay typeVoltage control relay product specific applicationFor 3-phase supply relay nameRM35UB3 relay monitored parametersAbsence of neutralOvervoltage and undervoltage between neutralOvervoltage and undervoltage between phases time delay typeAdjustable 0.3...30 s, 0 + 10 % on crossing the threshold switching capacity in VA1250 VA minimum switching current10 mA at 5 V DC maximum switching current5 A AC/DC power consumption in VA0...3.9 VA AC measurement range114...329 V voltage AC 50/60 Hz utilisation categoryAC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1DC-14 conforming to IEC 60947-5-1 Complementary reset time1500 ms for time delay maximum switching voltage250 V AC/DC [Us] rated supply voltage120...277 V AC, 50/60 Hz +/- 10 % supply voltage limits114...329 V AC voltage detection threshold114 V control circuit frequency50...60 Hz +/- 15 % output contacts1 C/O + 1 C/O, 1 per threshold nominal output current5 A measuring cycle<= 150 ms measurement cycle as true rms value hysteresis2 % run-up delay at power-up<= 650 ms measurement accuracy+/- 10 % of the full scale value repeat accuracy+/- 0.5 % for input and measurement circuit+/- 1 % for time delay measurement error< 1 % over the whole range with voltage variation0.05 %/°C with temperature variation response time< 200 ms in the event of a fault quality labelsCE overvoltage categoryIII conforming to IEC 60664-1 insulation resistance> 500 MOhm at 500 V DC conforming to IEC 60255-5> 500 MOhm at 500 V DC conforming to IEC 60664-1 [Ui] rated insulation voltage400 V conforming to IEC 60664-1 operating positionAny position without derating connections - terminalsScrew terminals 1 x 0.5...1 x 4 mm² - AWG 20...AWG 11, solid cable without cable endScrew terminals 2 x 0.5...2 x 2.5 mm² - AWG 20...AWG 14, solid cable without cable endScrew terminals 2 x 0.2...2 x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable endScrew terminals 1 x 0.2...2 x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable end tightening torque0.6...1 N.m conforming to IEC 60947-1 housing materialSelf-extinguishing plastic local signallingLED green for power ONLED yellow for relay ON mounting support35 mm symmetrical DIN rail conforming to EN/IEC 60715 electrical durability10000 cycles mechanical durability<= 30000000 cycles operating rate<= 360 operations/hour under full load safety reliability dataMTTFd = 502.2 yearsB10d = 470000 width35 mm product weight0.08 kg Environment electromagnetic compatibilityEmission standard for industrial environments conforming to EN/IEC 61000-6-4Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 standardsEN/IEC 60255-1 product certificationsCSAC-TickGLGOSTUL directives89/336/EEC - electromagnetic compatibility73/23/EEC - low voltage directive ambient air temperature for storage-40...70 °C ambient air temperature for operation-20...50 °C relative humidity95 % at 55 °C conforming to IEC 60068-2-30 vibration resistance0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-61 gn (f = 57.6...150 Hz) conforming to IEC 60255-21-1 shock resistance5 gn conforming to IEC 60068-2-27 IP degree of protectionIP20 (terminals) conforming to IEC 60529IP30 (casing) conforming to IEC 60529 pollution degree3 conforming to IEC 60664-1 dielectric test voltage2 kV AC 50 Hz, 1 min non-dissipating shock wave4 kV Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CertificateSizeAdd to My DocumentsProduct environmentalSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions Drawings3-Phase Voltage Control RelaysDimensions and Mounting
Connections and Schema3-Phase Voltage Control RelaysWiring Diagram
Technical DescriptionFunction DiagramsPhase Failure Detection (U measured < 0.7 x nominal supply voltage)Control of Overvoltage and UndervoltageLegend
Un Nominal supply voltage
Tt1 Overvoltage threshold delay
Tt2 Undervoltage threshold delay
U> Overvoltage threshold
U< Undervoltage threshold
L1, L2, L3 Phases of the supply voltage monitored
11-12, 11-14 R1 output relay connections
21-22, 21-24 R2 output relay connections
Relay status: black color = energized.