Global (English)
Welcome to the Schneider Electric corporate Website

ENGLISH | FRENCH

You can choose another country to view available products or go to our Global website for company information.

Select your location
View all Zelio Control Relays
Schneider Electric RM35TM50MW Image

RM35TM50MW

Green premium brand logo
Schneider Electric RM35TM50MW Image
RM35TM50MW
Green premium brand logo

motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO

Show more characteristics
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4

  • Main
    range of product
    Zelio Control
    product or component type
    Modular measurement and control relays
    relay type
    Motor temperature control relay
    product specific application
    For 3-phase supply
    relay name
    RM35TM
    relay monitored parameters
    Phase sequence
    Motor temperature via PTC probe
    Phase failure detection
    time delay
    Fixed 0.3 s
    switching capacity in VA
    1250 VA
    measurement range
    208...480 V voltage AC
    0...20 Ohm short-circuit detection
    Complementary
    reset time
    10000 ms output
    maximum switching voltage
    250 V AC
    250 V DC
    minimum switching current
    10 mA at 5 V DC
    maximum switching current
    5 A AC
    5 A DC
    supply voltage limits
    20.4…264 V AC
    20.4…264 V DC
    power consumption in VA
    0…4 VA at 24...240 V AC
    power consumption
    0.5 W DC
    control circuit frequency
    50...60 Hz +/- 10 %
    resistance across terminals
    602 mOhm
    output contacts
    2 NO
    nominal output current
    5 A
    measurement voltage limits
    176…528 V AC
    delay at power up
    500 ms
    voltage range
    176...528 V
    response time
    > 50 ms (input Y1 (contact Y1-T1) and push-button)
    [Uc] control circuit voltage
    <= 3.6 V of temperature control circuit (T1-T2 terminals open)
    short-circuit current
    0.007 A temperature sensing circuit (T1-T2 terminals short circuited)
    maximum resistance
    1500 Ohm for temperature sensor at 20 °C
    tripping threshold
    3100 Ohm +/- 10 % for temperature control circuit
    reset threshold
    1650 Ohm +/- 10 % for temperature control circuit
    marking
    CE
    overvoltage category
    III conforming to IEC 60664-1
    insulation resistance
    > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5
    > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1
    > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5
    > 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1
    > 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5
    > 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1
    [Ui] rated insulation voltage
    400 V conforming to IEC 60664-1
    supply frequency
    50/60 Hz +/- 10 %
    operating position
    Any position without
    connections - terminals
    Screw terminals, 1 x 0.5...1 x 4 mm² (AWG 20...AWG 11) solid without cable end
    Screw terminals, 2 x 0.5...2 x 2.5 mm² (AWG 20...AWG 14) solid without cable end
    Screw terminals, 1 x 0.2...1 x 2.5 mm² (AWG 24...AWG 12) flexible with cable end
    Screw terminals, 2 x 0.2...2 x 1.5 mm² (AWG 24...AWG 16) flexible with cable end
    tightening torque
    0.6…1 N.m conforming to IEC 60947-1
    housing material
    Self-extinguishing plastic
    local signalling
    LED (green)power ON:
    LED (yellow)phase of relay (R2):
    LED (yellow)temperature of relay (R1):
    mounting support
    35 mm symmetrical DIN rail conforming to EN/IEC 60715
    electrical durability
    10000 cycles
    mechanical durability
    30000000 cycles
    operating rate
    <= 360 operations/hour full load
    utilisation category
    AC-12 conforming to IEC 60947-5-1
    AC-13 conforming to IEC 60947-5-1
    AC-14 conforming to IEC 60947-5-1
    AC-15 conforming to IEC 60947-5-1
    DC-12 conforming to IEC 60947-5-1
    DC-13 conforming to IEC 60947-5-1
    width
    35 mm
    net weight
    0.13 kg
    Environment
    immunity to microbreaks
    20 ms at 20.4 V
    electromagnetic compatibility
    Emission standard for industrial environments conforming to EN/IEC 61000-6-4
    Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3
    Immunity for industrial environments conforming to EN/IEC 61000-6-2
    standards
    EN/IEC 60255-6
    IEC 60034-11-2
    product certifications
    GL
    UL
    GOST
    C-Tick
    CSA
    directives
    73/23/EEC - low voltage directive
    89/336/EEC - electromagnetic compatibility
    ambient air temperature for storage
    -40…70 °C
    ambient air temperature for operation
    -20…50 °C
    relative humidity
    95 % at 55 °C conforming to IEC 60068-2-30
    vibration resistance
    0.35 mm (f= 5…57.6 Hz) conforming to IEC 60068-2-6
    1 gn (f= 57.6…150 Hz) conforming to IEC 60255-21-1
    shock resistance
    15 gn for 11 ms conforming to IEC 60255-21-1
    IP degree of protection
    IP20 (terminals) conforming to IEC 60529
    IP30 (casing) conforming to IEC 60529
    pollution degree
    3 conforming to IEC 60664-1
    dielectric test voltage
    2 kV, 1 min AC 50 Hz
    non-dissipating shock wave
    4 kV
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    REACh Regulation
    EU RoHS Directive
    Pro-active compliance (Product out of EU RoHS legal scope)
    EU RoHS Declaration
    Mercury free
    Yes
    RoHS exemption information
    China RoHS Regulation
    Environmental Disclosure
    Circularity Profile
    WEEE
    The product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
    Contractual warranty
    Warranty
    18 months
  • Documents

    Language
    • English
    • Spanish
    • French
    • Italian
    • German
    Catalogue
    Date
    Size
    Add to My Documents
    Zelio Control - Monitoring & Control Relays catalog (Version 3.0)
    Catalogue Relais de mesure et de contrôle - Zelio Control (Version 3.0)
    CAD
    Date
    Size
    Add to My Documents
    CAD file (on TraceParts) for RM35TM50MW: motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO (Version 2.0)
    CAD for RM35TM50MW: motor voltage and temperature control relay - RM35-T - 24..240 V AC/DC - 2 NO (Version 1.0)
    Certificate
    Date
    Size
    Add to My Documents
    CSA Certificate RM17, RM22, RM35, RM8487 (Version 1.0)
    UL Listed RM17, RM22, RM35, RM8487 (Version 1.0)
    Zelio Control RM35 CCC Certificate 2011010303495614 (Version 1.0)
    EAC Certificate RM4 RM17 RM22 RM35 (Version 1.0)
    Instruction sheet
    Date
    Size
    Add to My Documents
    RM35TM...MW Motor control of 3-phase supplies, Instruction Sheet (Version 03)
    End of Life Information
    Date
    Size
    Add to My Documents
    RM35... Measurement and Control Relay, Product End-of-Life Instructions (Version 1.0)
    RM... Control Relay, Product End-of-Life Instructions (Version 2.0)
    EU RoHS Declaration
    Date
    Size
    Add to My Documents
    Product Environmental Profile
    Date
    Size
    Add to My Documents
    RM35... Measurement Relay, Product Environmental profile (Version 1.0)
    RM35... Measurement and Control Relay, Product Environmental profile (Version 1.0)
    RM... Control Relay, Product Environmental Profile (Version 2.0)
    REACh Declaration
    Date
    Size
    Add to My Documents
    RoHs China Declaration
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    3-Phase Supply and Motor Temperature Control Relays
    Dimensions and Mounting



  • Connections and Schema

    3-Phase Supply and Motor Temperature Control Relays
    Wiring Diagram



  • Technical Description

    Function Diagrams
    Phase Sequence Control and Phase Failure Detection (U measured < 0.7 x nominal supply voltage)


    Motor Temperature Control via PTC Probe


    Legend

    Un Nominal 3-phase supply voltage

    R T1-T2 Resistance between terminals T1 and T2

    11-14 R1 output relay connections

    Relay status: black color = energized.

    NOTE: The temperature control relay can take up to 6 PTC (positive temperature coefficient) probes wired in series between terminals T1 and T2.


Compare products: /