Main range of productZelio Control product or component typeModular measurement and control relays relay typeTemperature control relays product specific applicationFor elevator machine rooms and 3-phase supplies relay nameRM35AT relay monitored parametersOvertemperature: 34...46°CPhase failure detectionPhase sequenceUndertemperature: -1...11°C time delay range0.1...10 s adjustable delay (tolerance: 0...10 % of the full scale value) switching capacity in VA1250 VA minimum switching current10 mA at 5 V DC power consumption in VA<= 3.5 VA AC utilisation categoryAC-12 conforming to IEC 60947-5-1AC-13 conforming to IEC 60947-5-1AC-14 conforming to IEC 60947-5-1AC-15 conforming to IEC 60947-5-1DC-12 conforming to IEC 60947-5-1DC-13 conforming to IEC 60947-5-1DC-14 conforming to IEC 60947-5-1 Complementary reset time8 s maximum switching voltage250 V AC/DC [Us] rated supply voltage24...240 V AC/DC [Us] rated supply voltage24...240 V AC/DC supply voltage limits20.4...264 V AC21.6...264 V DC power consumption in W<= 0.6 W DC resistance across terminals600 kOhm 3-phase1.33 kOhm temperature width35 mm output contacts2 NO contacts materialCadmium free nominal output current5 A delay at power up0.2 s measurement accuracy+/- 2 °C response time<= 3.5 ms + Tt in case of temperature fault500 ms in case of 3-phase fault500 ms on disappearance of fault temperature probe typePt 100 - 3-wire installed devicePt 100 probe cable length <= 10 m markingCE : 73/23/EECCE : EMC 89/336/EEC overvoltage categoryIII conforming to IEC 60664-1 insulation resistance> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60255-5> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60664-1> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60255-5> 500 MOhm at 500 V DC between supply and relay output conforming to IEC 60664-1> 500 MOhm at 500 V DC between measurement and relay output conforming to IEC 60255-5> 1 MOhm at 500 V DC between supply and measurement conforming to IEC 60664-1 [Ui] rated insulation voltage400 V conforming to IEC 60664-1 operating voltage tolerance- 10 % + 10 % Un DC- 15 % + 10 % Un AC supply frequency50/60 Hz +/- 10 % operating positionAny position without derating connections - terminalsScrew terminals 1 x 0.5...1 x 4 mm² - AWG 20...AWG 11, solid cable without cable endScrew terminals 2 x 0.5...2 x 2.5 mm² - AWG 20...AWG 14, solid cable without cable endScrew terminals 1 x 0.2...1 x 2.5 mm² - AWG 24...AWG 12, flexible cable with cable endScrew terminals 2 x 0.2...2 x 1.5 mm² - AWG 24...AWG 16, flexible cable with cable end tightening torque0.6...1 N.m conforming to IEC 60947-1 housing materialSelf-extinguishing plastic local signalling1 LED green for power ON1 LED yellow for correct temperature (high R1)/(low R2)1 LED yellow for phases of relay mounting support35 mm symmetrical DIN rail conforming to EN/IEC 60715 electrical durability100000 cycles mechanical durability30000000 cycles operating rate<= 360 operations/hour under full load Environment immunity to microbreaks10 ms electromagnetic compatibilityEmission standard for industrial environments conforming to EN/IEC 61000-6-4Emission standard for residential, commercial and light-industrial environments conforming to EN/IEC 61000-6-3Immunity for industrial environments conforming to NF EN/IEC 61000-6-2 standardsIEC 60255-6NF EN 60255-6 product certificationsCSAC-TickGLGOSTUL ambient air temperature for storage-40...70 °C ambient air temperature for operation-20...50 °C vibration resistance0.35 mm (f = 5...57.6 Hz) conforming to IEC 60068-2-6/IEC 60255-21-11 gn (f = 57.6...150 Hz) conforming to IEC 60068-2-6/IEC 60255-21-1 shock resistance15 gn for 11 ms conforming to IEC 60255-21-1 IP degree of protectionIP20 (terminals) conforming to IEC 60529IP30 (casing) conforming to IEC 60529 pollution degree3 conforming to IEC 60664-1 dielectric test voltage2 kV AC 50 Hz, 1 min non-dissipating shock wave4 kV Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsDigest 178 Catalog 23: Relays and Timers (Version 1.0)CADSizeAdd to My DocumentsCertificateSizeAdd to My DocumentsUL Listed RM17, RM22, RM35, RM8487 (Version 1.0)Instruction sheetSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.