Main rangeEasyLogic product nameEasyLogic PM2200 device short namePM2210 product or component typePower meter Complementary device applicationPower monitoringSub billing power quality analysisTotal harmonic distortion type of measurementApparent power (min/max, total)Active and reactive power (min/max, total)Current (min/max, avg)Voltage (min/max, avg)Frequency (min/max, avg)Total current harmonic distortion THD (I) (per phase)Total voltage harmonic distortion THD (U) (per phase)Power factor (min/max, avg)Apparent energy (total)Active and reactive energy (total) metering typeActive power P, P1, P2, P3Apparent power S, S1, S2, S3Peak demand currentsReactive power Q, Q1, Q2, Q3Unbalance currentActive, reactive, apparent energy (signed, four quadrant)Calculated neutral currentDemand power P, Q, SPeak demand power PM, QM, SMCurrent I, I1, I2, I3Voltage U, U21, U32, U13, V, V1, V2, V3 accuracy classClass 1 (active energy according to IEC 62053-21)Class 1 (reactive energy according to IEC 62053-24) measurement accuracy+/- 0.05 % frequency+/- 1 % reactive energy+/- 0.5 % current+/- 0.5 % voltage+/- 0.01 power factor+/- 1 % active power+/- 1 % apparent power+/- 1 % active energy measurement current5...6000 mA measurement voltage35...480 V AC 50/60 Hz between phases20...277 V AC 50/60 Hz between phase and neutral480...999000 V AC 50/60 Hz with external VT frequency measurement range45...65 Hz [Us] rated supply voltage44...277 V AC +/- 10 % (45...65 Hz)44...277 V DC +/- 10 % network frequency50 Hz60 Hz ride-through time100 ms 120 V AC typical400 ms 230 V AC typical50 ms 125 V DC typical [In] rated current1 A5 A power consumption in VA<= 6 VA at 277 V AC power consumption in W<= 3.3 W power lines (AC)<= 2 W at 277 V power lines (DC) input impedanceCurrent (impedance <= 0.3 mOhm)Voltage (impedance > 5 MOhm) tamperproof of settingsProtected by access code display typeBacklit LCD display colourMonochrome display resolution128 x 128 pixels Demand intervalsConfigurable from 1 to 60 min information displayedVoltageCurrentFrequencyEnergy consumptionHarmonic distortionDemand current past valueDemand current present valueDemand power past valueDemand power present valuePower factorActive powerApparent powerReactive powerUnbalanced in %Harmonic amplitude control type4 x button local signallingGreen LED : module operating (RUN)Red LED : output signal 1...9999000 pulse/ k_h (kWh, kVAh, kVARh) number of inputs2 pulse number of outputs1 pulse POP parameterPulse: 20 ms (5...40 V DC, 20 mA max) 1...9999000 pulse/ k_h (kWh, kVAh, kVARh) impulse duration20 ms communication port protocolPOP sampling rate64 samples/cycle cybersecurityEnable/disable communication ports communication serviceRemote monitoring languageChineseEnglishFrenchGermanPortugueseRussianSpanish product certificationsCE conforming to IEC 61010-1CULus conforming to UL 61010-1EACCULus conforming to CSA C22.2 No 61010-1RCMC-Tick mounting modeClip-on mounting positionVertical mounting supportFramework provided equipmentInstallation guide 1 measurement categoryCategory III up to 480 VCategory II up to 480...600 V electrical insulation classClass IIDouble insulation flame retardanceV-0 conforming to UL 94 connections - terminalsCurrent transformer : bottom screw connection x 6Voltage inputs : top screw connection x 4 materialPolycarbonate width96 mm depth76.09 mm total61.64 mm embedded height96 mm product weight300 g compatibility codePM2210 Environment service life7 yr IP degree of protectionIP30 (body) conforming to IEC 60529IP54 (front) conforming to IEC 60529 relative humidity5...95 % 50 °C pollution degree2 ambient air temperature for operation-10...60 °C ambient air temperature for storage-25...70 °C operating altitude<= 2000 m electromagnetic compatibilityElectrostatic discharge conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3Surge immunity test conforming to IEC 61000-4-5Conducted RF disturbances conforming to IEC 61000-4-6Magnetic field at power frequency conforming to IEC 61000-4-8Electrical fast transient/burst immunity test conforming to IEC 61000-4-4Emission tests conforming to FCC part 15 class AVoltage dips and interruptions immunity test conforming to IEC 61000-4-11 overvoltage categoryIII Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructionsAvailable
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsBrochureSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.