Main rangeEasyLogic product nameEasyLogic PM11XXH RS device short namePM1130H product or component typeDual source energy meter Complementary power quality analysisTotal harmonic distortion device applicationEnergy monitoringMain or redundant power monitoring type of measurementPhase angleRPMPeak demand powerHarmonic distorsion (I THD & U THD)VoltageCurrentFrequencyActive powerPower factorActive energy metering typeActive power P, P1, P2, P3Apparent power S, S1, S2, S3FrequencyPhase current I1, I2, I3 RMSPhase currentsReactive power Q, Q1, Q2, Q3Rotation speedVoltage U21, U32, U13, V1, V2, V3Average voltage VavgAverage current IavgUnbalance currentUnbalance voltagePower factor and displacement PF (signed, four quadrant)Calculated neutral currentDemand power P, Q, SActive, reactive, apparent energy (signed, two quadrant) counter functionsON hour countingPower interruptionON-load source 1 hour countingON-load source 2 hour counting [Us] rated supply voltage48...277 V AC 45...65 Hz48...277 V DC network frequency50 Hz60 Hz [In] rated current1 A5 A type of network1P + N2P2P + N3P3P + N power consumption in VA4 VA at 240 V AC between phase and neutral power consumption in W2 W at 240 V DC display type7 segments LED display colourRed messages display capacity3 fields of 4 characters display digits12 digit(s) - 14.2 mm in height communication of dataInstantaneous and demand valuesReading of measurementsAll countersLast cleared logRevolution speed tamperproof of settingsProtected by access code sampling rate32 samples/cycle measurement current5...6000 mA SignalVoltage (impedance 5 MOhm) 4 terminal(s)Current 0.005...10 A (impedance 0.3 MOhm) 6 terminal(s) measurement voltage35...480 V AC 50...60 Hz between phases35...277 V AC 50...60 Hz between phase and neutral277...999000 V AC 50...60 Hz with external VT frequency measurement range45...65 Hz measurement accuracy+/- 0.5 % active energy+/- 2 % reactive energy+/- 0.5 % active power+/- 0.5 % apparent power+/- 0.05 % frequency+/- 0.5 % current+/- 0.5 % voltage+/- 0.01 power factor+/- 2 % reactive power+/- 0.5 % apparent energy+/- 5 % harmonic distorsion (I THD & U THD) accuracy classClass 2 (reactive energy according to IEC 62053-23)Class 0.5 (active energy according to IEC 62053-22) number of outputs1 relay output voltage300 V AC, 2 A max Demand intervals1 s local signallingGreen LED : activityRed LED : alternate sourceRed LED : output signal communication port protocolModbus 2 wires, : 4800 bps, 9600 bps, 19200 bps, 38.4 Kbps, even/odd or none, insulation: 2500 V communication port supportRS485 data recordingEnergy consumption logs materialPolycarbonate flame retardanceV-0 UL 94 conforming to UL 94 V-0 mounting modeFlush-mounted mounting supportFramework provided equipmentInstallation guide installation categoryIII type of installationIndoor installation measurement categoryCategory III up to <= 480 V electrical insulation classClass II connections - terminalsCurrent circuit : bottom screw clamp terminals 2.08...3.31 mm²Voltage circuit : top screw clamp terminals 0.82...3.31 mm²Control circuit : top screw clamp terminals 0.82...3.31 mm²Communication : bottom screw clamp terminals 0.33...3.31 mm²Secondary circuit : bottom screw clamp terminals 0.33...3.31 mm²Relay output : rear screw clamp terminals 0.33...3.31 mm² tightening torqueCurrent circuit : 0.9...1 N.m with Philips No 2Voltage circuit : 0.9...1 N.m with Philips No 2Control circuit : 0.9...1 N.m with Philips No 2Communication : 0.5...0.6 N.m with Philips no 1Secondary circuit : 0.5...0.6 N.m with Philips no 1Relay output : 0.5...0.6 N.m with Philips no 1 wire stripping lengthCommunication : 7 mmCurrent circuit : 3.68 mmVoltage circuit : 7 mmControl circuit : 7 mm7 mm standardsIEC 61010-1 ed. 3UL 61010-1 ed. 3 product certificationsCE conforming to IEC 61010-1CULus conforming to UL 61010-1CULus conforming to CSA C22.2 No 61010-1C-Tick width96 mm depth13 mm outside52 mm panel height96 mm product weight300 g Environment electromagnetic compatibility● electrical fast transient/burst immunity test, conforming to IEC 61000-4-4● conducted RF disturbances, conforming to IEC 61000-4-6● radiated radio-frequency electromagnetic field immunity test, conforming to IEC 61000-4-3● voltage dips and interruptions immunity test, conforming to IEC 61000-4-11● electrostatic discharge, conforming to IEC 61000-4-2● surge immunity test, conforming to IEC 61000-4-5● magnetic field at power frequency, conforming to IEC 61000-4-8● emission tests, conforming to FCC part 15 class A● emission tests, conforming to FCC part 15 subpart C● emission tests, conforming to FCC part 15 subpart E overvoltage categoryIII IP degree of protectionIP30 (body) conforming to IEC 60529IP51 (front) conforming to IEC 60529 relative humidity5...95 % 50 °C pollution degree2 ambient air temperature for operation-10...60 °C ambient air temperature for storage-20...70 °C operating altitude<= 2000 m service life> 7 yr Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profileAvailable Product end of life instructionsAvailable
Documents and DownloadsLanguage
User guideSizeAdd to My DocumentsEasyLogic™ PM1130H Conzerv™ EM6438H User Manual - TK (Version 01)EasyLogic™ PM1130H Conzerv™ EM6438H User Manual (Version 01)EasyLogic™ PM1130H Conzerv™ EM6438H – User manual - ZH (Version 01)EasyLogic™ PM1130H Conzerv™ EM6438H User Manual - ES (Version 01)
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.