Main range of productLexium 32 product or component typeMotion servo drive device short nameLXM32M format of the driveBook network number of phasesThree phase [Us] rated supply voltage200...240 V (- 15...10 %)380...480 V (- 15...10 %) supply voltage limits323...528 V170...264 V supply frequency50/60 Hz (- 5...5 %) network frequency47.5...63 Hz EMC filterIntegrated continuous output current40 A (f = 4 kHz) output current 3s peak100 A for 5 s maximum continuous power11000 W at 400 V nominal power11 kW at 400 V (f = 4 kHz) line current23.3 A, THDI of 140 % at 480 V, without line choke32 A, THDI of 54 % at 480 V, with external line choke of 0.5 mH38.1 A, THDI of 70 % at 380 V, with external line choke of 0.5 mH Complementary switching frequency4 kHz overvoltage categoryIII leakage current<= 30 mA output voltage<= power supply voltage electrical isolationBetween power and control type of cableSingle-strand IEC cable (for θ = 50 °C) conductor material: copper 90 °C ,wire insulation material: XLPE/EPR electrical connectionTerminal cable 8 mm² AWG 8 (CN8) tightening torque3.8 N.m (CN8) discrete input number2 capture discrete input typeCapture (CAP) sampling duration0.25 ms discrete input voltage24 V DC for capture discrete input logicPositive (compliment of STO_A, compliment of STO_B) at State 0: < 5 V at State 1: > 15 V conforming to EN/IEC 61131-2 type 1 response time<= 5 ms (compliment of STO_A, compliment of STO_B) discrete output number3 discrete output typeLogic (DO) 24 V DC discrete output voltage<= 30 V DC discrete output logicPositive or negative (DO) conforming to EN/IEC 61131-2 contact bounce time<= 1 ms (compliment of STO_A, compliment of STO_B) braking current50 mA response time on output250 µs (DO) discrete control signal typePulse train output (PTO) RS422 <= 500 kHz <= 100 m protection typeAgainst reverse polarity :inputs signal safety functionSTO (safe torque off), integrated safety levelSIL 3 conforming to EN/IEC 61508 communication interfaceIntegrated Modbus connector typeRJ45 (labelled CN7) :Modbus commissioning port2-wire RS485 multidrop Modbus transmission rate9600, 19200, 38400 bps for bus length of 40 m Modbus number of addressesModbus status LED1 LED (red) servo drive voltage signalling functionDisplay of faults in 7 segments markingCE operating positionVertical +/- 10 degree product compatibilityServo motor BMH (190 mm, 1 motor stacks)Servo motor BMH (190 mm, 2 motor stacks)Servo motor BMH (190 mm, 3 motor stacks)Servo motor BMH (190 mm, 4 motor stacks) width180 mm height385 mm depth240 mm product weight9.6 kg Environment electromagnetic compatibilityConducted EMC at class A group 1 conforming to EN 55011 standardsEN/IEC 61800-3 product certificationsCSA IP degree of protectionIP20 conforming to EN/IEC 60529 vibration resistance1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60028-2-27 pollution degree2 conforming to EN/IEC 61800-5-1 environmental characteristicClasses 3C1 conforming to IEC 60721-3-3 relative humidityClass 3K3 (5 to 85 %) without condensation conforming to IEC 60721-3-3 ambient air temperature for operation0...50 °C conforming to UL ambient air temperature for storage-25...70 °C type of coolingIntegrated fan operating altitude<= 1000 m without derating Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW)Compliant - since 1408 - Schneider Electric declaration of conformity
Schneider Electric declaration of conformity
REACh Product environmental profileAvailable
Product Environmental Profile
Product end of life instructionsAvailable
End of Life Information
Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsFirmware - ReleasedSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsLexium 32 Servo DriveDimensions
Mounting and ClearanceLexium 32 Motion Control Servo DrivesMounting Recommendations
LXM32MD85N4, LXM32MC10N4 servo drives have an integrated fan.
When selecting the position of the device in the control cabinet, note the following:
Mount the device in a vertical position (±10-). This is required for cooling the device.
Adhere to the minimum installation distances for required cooling. Avoid heat accumulations.
Do not mount the device close to heat sources.
Do not mount the device on flammable materials.
The heated airflow from other devices and components must not heat up the air used for cooling the device.
If the thermal limits are exceeded during operation, the drive switches off (overtemperature).
NOTE: For cables that are connected via the underside of the servo drive, a free space ≥ 200 mm/7.87 in. is required under the unit to comply with the bending radius of the connection cables.
Instructions to be followed
d ≥ 0 mm
NOTE: Do not use insulated enclosures, as they have a poor level of conductivity.Recommendations for Mounting in an Enclosure
To ensure good air circulation in the servo drive:
(1)Natural convection(2)Forced ventilation
Fit ventilation grilles on the enclosure.
Ensure that ventilation is adequate, otherwise install a forced ventilation unit with a filter.
Mounting in Metal Enclosure (IP 54 Degree of Protection)
Any apertures and/or fans must provide a flow rate at least equal to that of the servo drive fans (refer to characteristics).
Use special filters with IP 54 protection.
The servo drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc. In these cases, Lexium 32 servo drives can be installed in an enclosure where the internal temperature must not exceed 60°C.