motion servo drive LXM05C - 2.5 kW - 200..240 V - 1-phase - with EMC filterShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productLexium 05 product or component typeMotion servo drive component nameLXM05C network number of phasesSingle phase power supply voltage200...240 V - 15...10 % continuous output current13 A at 8 kHz15 A at 4 kHz nominal power2.5 kW at 4 kHz discrete input number6 logic input(s) analogue input number1 type of polarizationNo polarization impedances for Modbus Complementary power supply voltage limits170...264 V supply frequency50/60 Hz - 5...5 % power supply frequency limits47.5...63 Hz transient RMS output current20 A at 4 kHz for 3 s20 A at 8 kHz for 3 s line current23 A at 200 V19.2 A at 240 V maximum prospective line Isc1 kA switching frequency4 kHz8 kHz overvoltage categoryIII inrush current< 60 A leakage current< 30 mA output voltage<= power supply voltage insulationElectrical between power and control recommended type of cable for mounting in an enclosureWithout mounting kit :single-strand IEC cable at 45 °C, copper 70 °C PVCWithout mounting kit :single-strand IEC cable at 45 °C, copper 90 °C XLPE/EPR electrical connectionTerminal, clamping capacity: 6 mm² (AWG 10)PA/+, PBI, PBeTerminal, clamping capacity: 6 mm² (AWG 10)R/L1, S/L2, T/L3 tightening torque1.2 N.m (PA/+, PBI, PBe)1.2 N.m (R/L1, S/L2, T/L3) discrete input typeLogic input(s) (LI1, LI2, LI3, LI4) sampling duration0.25 ms (ANA1+/ANA1-, ANA2+/ANA2-), analog input(s)0.25 ms (LI1, LI2, LI3, LI4), discrete input(s) discrete input voltage24 V DC (logic input(s)) discrete input logicNegative (LI1, LI2, LI3, LI4) state 0: > 19 V, state 1: < 9 V conforming to EN/IEC 61131-2 type 1Positive logic (LI1, LI2, LI3, LI4) state 0: < 5 V, state 1: > 15 V conforming to EN/IEC 61131-2 type 1 response time<= 10 ms discrete output number3 discrete output typeLogic output(s) (LO1, LO2, LO3) 24 V DC discrete output voltage<= 30 V DC discrete output logicNegative (LO1, LO2, LO3) conforming to EN/IEC 61131-2Positive (LO1, LO2, LO3) conforming to EN/IEC 61131-2 contact bounce time1 ms (LI1...LI4) braking current50 mA response time on output1 ms (LO1, LO2) for discrete output(s) absolute accuracy error< +/- 1 % 25 °C< +/- 2 % over operating temperature range linearity error< +/- 0.5 % analogue input typeAnalog input (ANA1+/ANA1-) differential +/- 10 V, >= 10000 Ohm, 14 bits protection typeAgainst reverse polarity for inputs signalAgainst short-circuits for outputs signal safety functionPWR protection of the machine stop and/or prevent unintended operation of the servo motor conforming to IEC/EN 61800-5-2PWR protection of the machine stop and/or prevent unintended operation of the servo motor conforming to ISO 13849-1 level dPWR protection of the system process stop and/or prevent unintended operation of the servo motor conforming to EN/IEC 61508 level SIL2PWR protection of the system process stop and/or prevent unintended operation of the servo motor conforming to IEC/EN 61800-5-2 communication port protocolModbus connector typeRJ45 (labelled CN4) for Modbus physical interface2-wire RS485 multidrop ModbusRS422 for 2 A/B input(s), <= 400 kHzRS422 for 2 CW/CCW input(s), <= 400 kHzRS422 for 2 ESIM output input(s), <= 400 kHzRS422 for 2 P/D input(s), <= 400 kHz transmission rate9600, 19200, 38400 bps for Modbus data format8 bits, no parity, 1 or 2 stop Modbus8 bits, odd or even parity, 1 stop Modbus number of addresses1...247 addresses for Modbus communication serviceCommunication monitoring for ModbusDiagnostics (08) for ModbusRead device identification (43) for ModbusRead holding registers (03) for ModbusRead/write multiple registers (23) for ModbusWrite multiple registers (16) for ModbusWrite single register (06) for Modbus diagnostics1 LED red signalling drive voltage signalling functionDisplay of faults on integrated 7-segment display terminal max nodes number31 for Modbus input resistance2 kOhm markingCE type of coolingNatural convection operating positionVertical +/- 10 degree product weight2 kg Environment EMC filterIntegrated electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3 standardsEN/IEC 50178EN/IEC 61800-3EN/IEC 61800-5-1 product certificationsCULUL IP degree of protectionIP20 on upper part with protective cover removed conforming to EN/IEC 60529IP20 on upper part with protective cover removed conforming to EN/IEC 61800-5-1IP41 on upper part with protective cover in place conforming to EN/IEC 60529IP41 on upper part with protective cover in place conforming to EN/IEC 61800-5-1 vibration resistance1.5 mm peak to peak (f = 3...13 Hz) conforming to EN/IEC 60068-2-61 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn (duration = 11 ms) conforming to EN/IEC 60028-2-27 pollution degree2 conforming to EN/IEC 61800-5-1 environmental characteristicClasses 3C1 conforming to IEC 60721-3-3 relative humidityClass 3K3 (5 to 93 %) without condensation conforming to IEC 60721-3-3 ambient air temperature for operation0...50 °C ambient air temperature for storage-25...70 °C operating altitude<= 1000 m without derating> 1000...2000 m with conditions Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.