LF3MP04EU

TeSys

TeSys LF

Enclosed DOL starter

AS interface

Circuit-breaker
AS interface module
Contactor

AC-3

AC

24 V for AC circuit at 50/60 Hz

0.63...1 A

Rotary handle for protection control - OFF - Trip - ON

0.18 kW at 400/415 V - AC at 50/60 Hz

50/60 Hz

415 V - AC at 50/60 Hz for power circuit
250 V - AC at 50/60 Hz for output control relay
30 V - DC for output control relay

6 kV for power circuit conforming to IEC 60947-1
2.5 kV for 24 V conforming to IEC 60947-1
2.5 kV for sensor conforming to IEC 60947-1
2.5 kV for AS-Interface conforming to IEC 60947-1

> 1000 mOhm between output and communication

1500 V between output and ground
1500 V between output and internal logic
Between input and communication

AC at 50/60 Hz conforming to IEC 60947

5 A for output control relay at 40 °C

Inductive overvoltage
Phase failure

100 kA at 230/240 V conforming to IEC 60947-2
100 kA at 400/415 V conforming to IEC 60947-2

Circuit breaker : 0.1 Mcycles
Contactor : 30 Mcycles

Circuit breaker : 0.1 Mcycles
Contactor : 0.8 Mcycles - AC-3 - 8.5 A
Relay : 0.1 Mcycles - 24 V with 6 cyc/mn - AC-12 - 5 A
Relay : 1 Mcycles - 24 V with 15 cyc/mn - AC-12 - 1 A
Relay : 0.5 Mcycles - 24 V with 15 cyc/mn - AC-14 - 1 A
Relay : 1 Mcycles - 24 V with 15 cyc/mn - AC-14 - 0.5 A
Relay : 5 Mcycles - 24 V with 30 cyc/mn - AC-14 - 0.25 A
Relay : 0.1 Mcycles - 24 V with 6 cyc/mn - DC-12 - 5 A
Relay : 0.2 Mcycles - 24 V with 6 cyc/mn - DC-12 - 2 A
Relay : 0.5 Mcycles - 24 V with 15 cyc/mn - DC-3 - 1 A
Relay : >= 1 Mcycles - 24 V with 30 cyc/mn - DC-3 - 0.25 A

20 mA for communication bus during operation
60 mA for communication bus sensor
0 mA at 24 V for supply circuit de-energisation
30 mA at 24 V for supply circuit maintained mode
110 mA at 24 V for supply circuit inrush

Product status by 3 LEDs
Input/output status by LED

2 M12

19...30 V 50 mA - DC

Status D0 : forward stop - bit value 0
Status D1 : reverse stop - bit value 0
Status D2 : disable relay - bit value 0
Status D3 : unused - bit value 0
Status D0 : forward start - bit value 1
Status D1 : reverse start - bit value 1
Status D2 : enable relay - bit value 1
Status D3 : unused - bit value 1

Resistive

2 or 3-wire PNP

Command D0 : not ready - bit value 0
Command D1 : stopped - bit value 0
Command D2 : sensor 1 missing - bit value 0
Command D3 : sensor 2 missing - bit value 0
Command D0 : ready - bit value 1
Command D1 : started - bit value 1
Command D2 : sensor 1 present - bit value 1
Command D3 : sensor 2 present - bit value 1

Output control relay : <= 10 ms during closing
Output control relay : <= 15 ms during opening

1 C/O

7A70 - extended A/B

Supply circuit : Pg 16 - 10...15 mm
Power circuit : Pg 16 - 10...15 mm
Output control relay : Pg 13 - 10...15 mm
Output control relay : Pg 16 - 10...15 mm

Supply circuit: screw clamp terminals 1 x 1.5...2 x 6 mm² rigid
Supply circuit: screw clamp terminals 1 x 1.5...2 x 6 mm² flexible without cable end
Supply circuit: screw clamp terminals 1 x 1.5...2 x 4 mm² flexible with cable end
Power circuit: screw clamp terminals 1 x 1.5...2 x 4 mm² rigid
Power circuit: screw clamp terminals 1 x 1.5...2 x 4 mm² flexible without cable end
Power circuit: screw clamp terminals 1 x 1.5...1 x 2.5 mm² flexible with cable end
Output control relay: screw terminals 1 x 0.5...1 x 1.5 mm² rigid
Output control relay: screw terminals 1 x 0.5...1 x 1.5 mm² flexible without cable end
Output control relay: screw terminals 1 x 0.5...1 x 1.5 mm² flexible with cable end

Supply circuit : 1.7 N.m - with screwdriver flat Ø 5.5 mm
Power circuit : 0.8 N.m - with screwdriver flat Ø 5.5 mm
Output control relay : 0.7 N.m - with screwdriver flat Ø 3.5 mm

219 mm

245 mm

179 mm

1.3 kg

Electrostatic discharge 8 kV level 3 - in air - conforming to EN/IEC 61000-4-2
Electrostatic discharge 4 kV level 2 - in indirect mode - conforming to EN/IEC 61000-4-2
Electrical fast transient/burst immunity test 2 kV level 3 conforming to EN/IEC 61000-4-4
Surge immunity test 4 kV level 4 - power, line to ground - conforming to IEC 61000-4-5
Surge immunity test 2 kV level 4 - power, line to line - conforming to EN/IEC 61000-4-5
Surge immunity test 2 kV level 2 - control circuit, line to ground - conforming to IEC 61000-4-5
Surge immunity test 500 V level 2 - control circuit, line to line - conforming to EN/IEC 61000-4-5
Conducted RF disturbances 10 V/m conforming to IEC 61000-4-6
Conducted RF disturbances 10 V/m conforming to ENV 50141
Radiated radio-frequency electromagnetic field immunity test 10 V/m conforming to IEC 61000-4-3
Radiated radio-frequency electromagnetic field immunity test 10 V/m conforming to ENV 50204
Radiated radio-frequency electromagnetic field immunity test 10 V/m conforming to ENV 50140
Disturbing field emission class B conforming to ENV 55011
Disturbing field emission class B conforming to CISPR 11

Shocks : 10 Gn during contactor open conforming to IEC 60068-2-27
Shocks : 15 gn during contactor closed conforming to IEC 60068-2-27
Vibrations : 2 Gn during contactor open conforming to IEC 60068-2-6
Vibrations : 4 Gn during contactor closed conforming to IEC 60068-2-6

IP54 conforming to IEC 60529

TC

960 °C conforming to IEC 60695-2-1

2000 m

EN 60204-1
EN 60439-1
EN 60947-1
IEC 60204-1
IEC 60439-1
IEC 60947-1
UL 508
CSA C22.2 No 14

Steel - white : RAL 9001

-5...40 °C conforming to IEC 61439-1

-40...80 °C conforming to IEC 61439-1

Green Premium product

Compliant  - since  0925  -  Schneider Electric declaration of conformity
Schneider Electric declaration of conformity

Reference not containing SVHC above the threshold

Available
Product Environmental Profile

Available
End of Life Information

18 months