View all TeSys K
TeSys K changeover contactor - 4P - AC-1 <= 440 V 20 A - 12 V AC coilShow more characteristics >
LC2K12004J7 has not been replaced. Please contact your customer care center for more information.
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main rangeTeSys product nameTeSys K product or component typeChangeover contactor device short nameLC2K device applicationControl contactor applicationResistive load utilisation categoryAC-1 device presentationPreassembled with reversing power busbar poles description4P power pole contact composition4 NO [Ue] rated operational voltage690 V AC 50/60 Hz for power circuit [Ie] rated operational current20 A (<= 50 °C) at <= 440 V AC AC-1 for power circuit16 A (<= 70 °C) at 690 V AC AC-1 for power circuit control circuit typeAC 50/60 Hz [Uc] control circuit voltage12 V AC 50/60 Hz [Uimp] rated impulse withstand voltage8 kV overvoltage categoryIII [Ith] conventional free air thermal current20 A at <= 50 °C for power circuit Irms rated making capacity144 A at 690 V AC for power circuit conforming to IEC 60947144 A at 690 V AC for power circuit conforming to NF C 63-110 rated breaking capacity110 A at 440 V conforming to IEC 6094780 A at 500 V conforming to IEC 6094770 A at 660...690 V conforming to IEC 60947 [Icw] rated short-time withstand current25 A <= 50 °C >= 15 min power circuit115 A <= 50 °C 1 s power circuit105 A <= 50 °C 5 s power circuit100 A <= 50 °C 10 s power circuit75 A <= 50 °C 30 s power circuit55 A <= 50 °C 1 min power circuit50 A <= 50 °C 3 min power circuit associated fuse rating25 A gG at <= 440 V for power circuit25 A aM for power circuit average impedance3 mOhm at 50 Hz - Ith 20 A for power circuit [Ui] rated insulation voltage600 V for power circuit conforming to CSA C22.2 No 14690 V for power circuit conforming to IEC 60947-4-1600 V for power circuit conforming to UL 508 electrical durability0.3 Mcycles 20 A AC-1 at Ue <= 440 V interlocking typeMechanical mounting supportPlateRail standardsBS 5424IEC 60947NF C 63-110VDE 0660 product certificationsCSAUL connections - terminalsScrew clamp terminals 1 cable(s) 1.5...4 mm² - cable stiffness: solidScrew clamp terminals 1 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable endScrew clamp terminals 1 cable(s) 0.34...2.5 mm² - cable stiffness: flexible - with cable endScrew clamp terminals 2 cable(s) 1.5...4 mm² - cable stiffness: solidScrew clamp terminals 2 cable(s) 0.75...4 mm² - cable stiffness: flexible - without cable endScrew clamp terminals 2 cable(s) 0.34...1.5 mm² - cable stiffness: flexible - with cable end tightening torque1.3 N.m - on screw clamp terminals - with screwdriver Philips No 21.3 N.m - on screw clamp terminals - with screwdriver flat Ø 6 mm operating time10...20 ms coil de-energisation and NO opening10...20 ms coil energisation and NO closing safety reliability levelB10d = 1369863 cycles contactor with nominal load conforming to EN/ISO 13849-1B10d = 20000000 cycles contactor with mechanical load conforming to EN/ISO 13849-1 mechanical durability5 Mcycles operating rate3600 cyc/h Complementary control circuit voltage limits0.2...0.75 Uc at <= 50 °C drop-out0.8...1.15 Uc at <= 50 °C operational inrush power in VA30 VA at 20 °C hold-in power consumption in VA4.5 VA at 20 °C heat dissipation1.3 W Environment IP degree of protectionIP20 conforming to VDE 0106 protective treatmentTC conforming to IEC 60068TC conforming to DIN 50016 ambient air temperature for operation-25...50 °C ambient air temperature for storage-50...80 °C operating altitude2000 m without derating flame retardanceV1 conforming to UL 94Requirement 2 conforming to NF F 16-101Requirement 2 conforming to NF F 16-102 mechanical robustnessShocks contactor closed, on X axis 10 Gn for 11 ms IEC 60068-2-27Shocks contactor closed, on Y axis 15 Gn for 11 ms IEC 60068-2-27Shocks contactor closed, on Z axis 15 Gn for 11 ms IEC 60068-2-27Shocks contactor opened, on X axis 6 Gn for 11 ms IEC 60068-2-27Shocks contactor opened, on Y axis 10 Gn for 11 ms IEC 60068-2-27Shocks contactor opened, on Z axis 10 Gn for 11 ms IEC 60068-2-27Vibrations contactor closed 4 Gn, 5...300 Hz IEC 60068-2-6Vibrations contactor opened 2 Gn, 5...300 Hz IEC 60068-2-6 height58 mm width90 mm depth57 mm product weight0.38 kg Contractual warranty Warranty period18 months
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.