integrated drive ILP with 2-phase stepper motor - 24..48 V DC - RS485 - 0.19 N.mShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productLexium integrated drive product or component typeMotion integrated drive device short nameILP motor type2-phase stepper motor network typeDC electrical connectionIndustrial connector [Us] rated supply voltage24...48 V length77.72 mm winding typeMedium speed of rotation and medium torque gear box typeWithout nominal speed1500 rpm at 48 V800 rpm at 24 V holding torque0.19 N.m Complementary communication interfaceRS485 transmission rate4.8, 9.6, 19.2, 38.4, 115 kbauds mounting supportFlange motor flange size42 mm feedback typeIndex pulse holding brakeWithout supply voltage limits12...48 V current consumption1.3 A (maximum continuous) input/output type11 signals (each be used as input or output) voltage state 0 guaranteed<= 0.8 V voltage state 1 guaranteed>= 2.2 V discrete input current1.75 mA at 24 V for 24 V signal interface maximum switching current275 mA four channels600 mA single channel protection typeOverload of output voltageShort circuit of the output voltage peak stall torque0.19 N.m continuous stall torque0.19 N.m speed feedback resolution1000 steps10000 steps12800 steps1600 steps200 steps2000 steps20000 steps25000 steps25600 steps3200 steps400 steps40000 steps5000 steps50000 steps51200 steps6400 steps800 steps accuracy error+/- 0.3 arc/min rotor inertia0.038 kg.cm² service life in hours20000 H markingCE Environment standardsIEC 61000-4-3IEC 61000-4-6EN 61000-3-3:1995, A1:2001, A2:2005IEC 61000-4-5IEC 61000-4-4EN 61000-3-2 : 2006EMC immunity IEC 61000-4-2IEC 61000-4-11EN 55011:2007, A2:2007 for Group 1, Class A ambient air temperature for operation> 50...65 °C with power derating of 2 % per °C0...50 °C without derating permissible ambient air temperature around the device100 °C ambient air temperature for storage-25...70 °C operating altitude<= 1000 m without derating relative humidity15...85 % without condensation IP degree of protectionIP41 shaft bushing conforming to EN/IEC 60034-5IP54 total except shaft bushing conforming to EN/IEC 60034-5 Contractual warranty Warranty period18 months
Documents and Downloads
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsIntegrated Drive with Industrial ConnectorsDimensions(1)Thread(2)DepthL77.72 mm/3.06 in.
Connections and SchemaConnection Example with 4 I/O Signals
Three sinking inputs (I/O4 - I/O2) and a sourcing output (I/O1).RRelay
Performance CurvesTorque CharacteristicsXSpeed of rotation in rpmYTorque in Nm