integrated servo motor - 1.7 Nm - 6000 rpm - keyed shaft - multiturn- with brakeShow more characteristics >
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
Main range of productPacDrive 3 product or component typeServo motor integrated drive device short nameILM Complementary [Us] rated supply voltage250...700 V continuous stall current2.5 A continuous stall torque1.7 N.m peak stall torque7.6 N.m nominal output power720 W nominal torque1.15 N.m nominal speed6000 rpm maximum current Irms11.8 A [In] rated current1.5 A shaft endKeyed second shaftWithout second shaft end shaft diameter11 mm shaft length23 mm key width18 mm feedback typeAbsolute multiturn SinCos Hiperface speed feedback resolution128 periods holding brakeWith holding torque3 N.m (holding brake) mounting supportInternational standard flange motor flange size70 mm torque constant0.76 N.m/A at 120 °C back emf constant48 V/krpm at 20 °C number of motor poles6 rotor inertia0.51 kg.cm² stator resistance4.2 Ohm at 20 °C for Ph/Ph2.92 Ohm at 120 °C for Ph/N stator inductance19 mH at 20 °C for Ph/Ph9.5 mH at 120 °C for Ph/N maximum radial force Fr390 N at 6000 rpm410 N at 5000 rpm450 N at 4000 rpm490 N at 3000 rpm560 N at 2000 rpm710 N at 1000 rpm maximum axial force Fa0.2 x Fr type of coolingNatural convection length252 mm number of motor stacks2 centring collar diameter60 mm centring collar depth2.5 mm number of mounting holes4 mounting holes diameter5.5 mm circle diameter of the mounting holes82 mm product weight3.7 kg Environment IP degree of protectionIP54 Offer Sustainability Sustainable offer statusGreen Premium product RoHS (date code: YYWW) REACh Product environmental profile Product end of life instructions
Documents and DownloadsLanguage
CertificateSizeAdd to My DocumentsDeclaration of conformitySizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.