Welcome to the Schneider Electric corporate Website

ENGLISH | FRENCH

You can choose another country to view available products or go to our Global website for company information.

Choose your country or region

Schneider Electric ILE2K661PB1A5 Image

Range: Lexium ILA, ILE, ILS

Lexium Integrated Drives

ILE2K661PB1A5

Schneider Electric ILE2K661PB1A5 Image
Range: Lexium ILA, ILE, ILS

Lexium Integrated Drives

ILE2K661PB1A5

brushless dc motor 24..48 V - EtherNet/IP interface - L = 174 mm - 24:1

Show more characteristics >
Add to My Products Remove from My Products

  • Main
    range of product
    Lexium integrated drive
    product or component type
    Motion integrated drive
    device short name
    ILE
    motor type
    Brushless dc motor
    number of motor poles
    6
    network number of phases
    Single phase
    [Us] rated supply voltage
    24 V
    48 V
    network type
    DC
    communication interface
    Integrated Ethernet/IP
    length
    229 mm
    winding type
    Medium speed of rotation and medium torque
    electrical connection
    Printed circuit board connector
    holding brake
    Without
    gear box type
    Worm gear, 2 stages
    reduction ratio
    24:1 (525:22)
    nominal speed
    168 rpm at 24 V
    168 rpm at 48 V
    nominal torque
    3.8 N.m at 24 V
    3.8 N.m at 48 V
    Complementary
    transmission rate
    125, 250, 500 kbauds
    mounting support
    Flange
    motor flange size
    66 mm
    number of motor stacks
    1
    centring collar diameter
    36 mm
    number of mounting holes
    2
    mounting holes diameter
    4.4 mm
    feedback type
    BLDC encoder
    shaft end
    Hole
    second shaft
    Without second shaft end
    supply voltage limits
    18...55.2 V
    current consumption
    7000 mA (peak)
    5500 mA (maximum continuous)
    associated fuse rating
    16 A
    commissioning interface
    RS485 Modbus TCP (9.6, 19.2 and 38.4 kbauds)
    input/output type
    4 signals (each be used as input or output)
    voltage state 0 guaranteed
    -3...4.5 V
    voltage state 1 guaranteed
    15...30 V
    discrete input current
    <= 10 mA at 24 V on/STO_A for safety input
    <= 3 mA at 24 V on/STO_B for safety input
    2 mA at 24 V for 24 V signal interface
    discrete output voltage
    23...25 V
    maximum switching current
    100 mA per output
    200 mA total
    protection type
    Overload of output voltage
    Safe torque off
    Short circuit of the output voltage
    supply current
    Supply: 0.1 A, power stage disabled
    Supply: 3.8 A, 48 V
    Supply: 6.8 A, 24 V
    nominal output power
    45 W at 24 V
    66 W at 48 V
    peak stall torque
    6.19 N.m at 48 V
    6.19 N.m at 24 V
    continuous stall torque
    4.2 N.m
    detent torque
    2.9 N.m
    speed feedback resolution
    12 points/turn (motor)
    1.26° (gearbox output)
    accuracy error
    +/- 1 point
    rotor inertia
    90 kg.cm²
    maximum mechanical speed
    186 rpm
    maximum radial force Fr
    200 N
    maximum axial force Fa
    80 N
    service life in hours
    3000 h of bearing :
    marking
    CE
    type of cooling
    Natural convection
    product weight
    2.3 kg
    Environment
    standards
    EN 50347
    EN 61800-3:2001, second environment
    EN 61800-3 : 2001-02
    EN/IEC 50178
    EN/IEC 61800-3
    IEC 60072-1
    IEC 61800-3, Ed 2
    product certifications
    CUL
    TÜV
    UL
    ambient air temperature for operation
    0...40 °C without derating
    > 40...55 °C with power derating of 2 % per °C
    permissible ambient air temperature around the device
    105 °C (power amplifier)
    110 °C (motor)
    ambient air temperature for storage
    -25...70 °C
    operating altitude
    <= 1000 m without derating
    relative humidity
    15...85 % without condensation
    vibration resistance
    20 m/s² (f = 10...500 Hz) for 10 cycles conforming to EN/IEC 60068-2-6
    shock resistance
    150 m/s² for 1000 shocks conforming to EN/IEC 60068-2-29
    IP degree of protection
    IP41 shaft bushing conforming to EN/IEC 60034-5
    IP54 total except shaft bushing conforming to EN/IEC 60034-5
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    REACh
    Product environmental profile
    Product end of life instructions
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    Declaration of conformity
    Date
    Size
    Add to My Documents
    Date 6/6/16
    Size 106 KB
    End of life manual
    Date
    Size
    Add to My Documents
    Product environmental
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    Integrated Drive with Worm Gear
    Dimensions


    1
    Option: industrial connectors
    2
    Accessories: I/O signal insert with industrial connectors
    3
    Earth (ground) terminal
    4
    Accessories: cable entries Ø = 3 ... 9 mm/0.12 ... 0.35 in.


  • Connections and Schema

    Connection Example with 4 I/O Signals



  • Performance Curves

    Torque Characteristics


    X1
    Speed of rotation of motor in rpm
    X2
    Speed of rotation of gearing in rpm
    Y
    Torque in Nm
    1.1
    Max. torque at 24 V
    1.2
    Max. torque at 48 V