FCE200522B200

servo motor SHS 071 3,85Nm,brake,2k RPM

Add to My Favorites Remove from My Favorites

Compare

Main
range compatibility	PacDrive 3
product or component type	Servo motor
device short name	SHS
encoder type	Absolute multiturn SinCos Hiperface

Complementary
maximum mechanical speed	8000 rpm
[Us] rated supply voltage	400 V
network number of phases	Three phase
continuous stall current	2.2 A
continuous stall torque	4.65 N.m for LXM62 4.65 N.m for LXM52
continuous power	810 W
peak stall torque	18.3 N.m for LXM62 18.3 N.m for LXM52
nominal output power	810 W for LXM62 810 W for LXM52
nominal torque	3.85 N.m for LXM62 3.85 N.m for LXM52
nominal speed	2000 rpm for LXM62 2000 rpm for LXM52
maximum current Irms	9 A for LXM62 9 A for LXM52
maximum permanent current	2 A
product compatibility	LXM62 at 400 V, three phase LXM52 at 400 V, three phase
switching frequency	8 kHz
shaft end	Smooth shaft
shaft diameter	19 mm
shaft length	30 mm
key width	5 mm
speed feedback resolution	128 periods
holding brake	With
holding torque	2.5 N.m
mounting support	Flange
motor flange size	71 mm
electrical connection	Cable with stripped end
back emf constant	0.7 V/krpm at 20 °C
number of motor poles	49
rotor inertia	2.93 kg.cm²
stator resistance	8.6 Ohm
stator inductance	45.7 mH
maximum radial force Fr	790 N at 2000 rpm
maximum axial force Fa	160 N
type of cooling	Natural convection
length	284 mm
centring collar diameter	85 mm
centring collar depth	3.5 mm
number of mounting holes	4
mounting holes diameter	8 mm
circle diameter of the mounting holes	100 mm
product weight	8.8 kg
sizing reference	SC005H3202
network number of phases	3
temperature copper hot	130 °C

Environment
IP degree of protection	IP69K for motor conforming to EN/IEC 60034-5 IP67 for motor conforming to EN/IEC 60034-5