enclosed variable speed drive ATV61 Plus - 250 kW - 400V - IP23Show more characteristics
Main range of productAltivar 61 Plus product or component typeVariable speed drive device short nameATV61 product destinationAsynchronous motorsSynchronous motors product specific applicationPumping and ventilation machine assembly styleIn floor-standing enclosure compact version product compositionA line chokeTerminals/bars for motor connectionATV61HC25N4D standard drive IP00A switch and fast-acting fusesA wired ready-assembled Sarel Spacial 6000 enclosureAn IP65 remote mounting kit for graphic display terminal EMC filterIntegrated network number of phases3 phases rated supply voltage380...415 V +/- 10 % supply voltage limits342…457 V supply frequency50...60 Hz - 5...5 % network frequency limits47.5…63 Hz motor power kW250 kW, 3 phases at 380...415 V line current418 A at 400 V3 phases / 250 kW IP degree of protectionIP23 Complementary apparent power292 kVA for 400 V, 3 phases 250 kW prospective line Isc100 kA with external fuses continuous output current481 A, 2.5 kHz at 400 V 3 phases maximum transient current577 A for 60 s, 3 phases speed drive output frequency0.1…500 Hz nominal switching frequency2.5 kHz switching frequency2...8 kHz adjustable2.5...8 kHz with derating factor speed range1…100 in open-loop mode, without speed feedback speed accuracy+/- 10 % of nominal slip 0.2 Tn to Tn without speed feedback torque accuracy+/- 15 % in open-loop mode, without speed feedback transient overtorque120 % of nominal motor torque for 60 s135 % of nominal motor torque for 2 s braking torque<= 125 % with braking resistor30 % without braking resistor asynchronous motor control profileFlux vector control without sensor, standardEnergy saving ratioVoltage/frequency ratio (2 or 5 points) synchronous motor control profileVector control without sensor, standard regulation loopAdjustable PI regulator motor slip compensationNot available in voltage/frequency ratio (2 or 5 points)Can be suppressedAdjustableAutomatic whatever the load overvoltage categoryClass 3 conforming to EN 50178 local signallingLCD display unitoperation function, status and configuration - mounted in the front door: output voltage<= power supply voltage isolationBetween power and control terminals type of cable for external connectionIEC cable at 40 °C, copper 70 °C / PVC electrical connectionTerminal - 2.5 mm² / AWG 14 (AI1-/AI1+, AI2, AO1, R1A, R1B, R1C, R2A, R2B, LI1...LI6, PWR) entry from the bottomTerminal M12 - 4 x 240 mm² (U/T1, V/T2, W/T3) entry from the bottomTerminal M10 - 2 x 300 mm² (L1/R, L2/S, L3/T) entry from the bottom motor recommanded cable cross section2 (3 x 150) mm² short-circuit protection630 A fuse protection type gI - power supply upstream supplyExternal supply: 24 V (19…30 V)DC, <1 A, 30 WInternal supply for reference potentiometer: 10 V (10…11 V)DC, <10 mAInternal supply: 24 V (21…27 V)DC, <100 mA analogue input number2 analogue input typeAI2 software-configurable voltage: 0...10 V DC, 24 V max, impedance: 30 kOhm, sampling time: 1.5…2.5 ms, resolution: 11 bitsAI1-/Al1+ bipolar differential voltage: +/- 10 V DC, 24 V max, sampling time: 1.5…2.5 ms, resolution: 11 bits + signAI2 software-configurable current: 0...20 mA/4...20 mA, impedance: 250 Ohm, sampling time: 1.5…2.5 ms, resolution: 11 bits analogue output number1 analogue output typeSoftware-configurable voltage: (AO1) 0...10 V DC - 470 Ohm - sampling time: 1.5…2.5 ms - resolution: 10 bitsSoftware-configurable current: (AO1) 0...20 mA/4...20 mA - 500 Ohm - sampling time: 1.5…2.5 ms - resolution: 10 bits discrete output number2 discrete output typeConfigurable relay logic: (R1A, R1B, R1C)NO/NC - 6.5...7.5 ms - 100000 cyclesConfigurable relay logic: (R2A, R2B)NO - 6.5...7.5 ms - 100000 cycles minimum switching current3 mA at 24 V DC (configurable relay logic) maximum switching current5 A at 250 V AC on resistive load - cos phi = 1 for configurable relay logic5 A at 30 V DC on resistive load - L/R = 0 ms for configurable relay logic2 A at 250 V AC on inductive load - cos phi = 0.4 for configurable relay logic2 A at 30 V DC on inductive load - L/R = 7 ms for configurable relay logic discrete input number7 discrete input typeProgrammable (LI1...LI5) at 24 V DC <= 30 V level 1 PLC 3.5 kOhm (duration=1.5…2.5 ms)Switch-configurable (LI6) at 24 V DC <= 30 V level 1 PLC 1.5 kOhm (duration=1.5…2.5 ms)Safety input (PWR) at 24 V DC <= 30 V 1.5 kOhm discrete input logicPositive logic (source) (LI1...LI6), 0...5 V (state 0), 11...30 V (state 1)Negative logic (sink) (LI1...LI6), 16...30 V (state 0), 0...10 V (state 1)Positive logic (source) (PWR), 0...2 V (state 0), 17...30 V (state 1) acceleration and deceleration rampsLinear adjustable separately from 0.01 to 9000 sS, U or customized braking to standstillBy DC injection protection typeAgainst exceeding limit speed: driveAgainst input phase loss: driveBreak on the control circuit: driveInput phase breaks: driveLine supply overvoltage: driveLine supply undervoltage: driveOvercurrent between output phases and earth: driveOverheating protection: driveOvervoltages on the DC bus: drivePower removal: driveShort-circuit between motor phases: driveThermal protection: driveMotor phase break: motorPower removal: motorThermal protection: motor dielectric strength3535 V DC between earth and power terminals5092 V DC between control and power terminals insulation resistance> 1 mOhm 500 V DC for 1 minute to earth frequency resolutionAnalog input: 0.024/50 HzDisplay unit: 0.1 Hz communication port protocolModbusCANopen connector type1 RJ45 (on front face) for Modbus1 RJ45 (on terminal) for ModbusMale SUB-D 9 on RJ45 for CANopen physical interface2-wire RS 485 for Modbus transmission frameRTU for Modbus transmission rate4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus on terminal9600 bps, 19200 bps for Modbus on front face20 kbps, 50 kbps, 125 kbps, 250 kbps, 500 kbps, 1 Mbps for CANopen data format8 bits, 1 stop, even parity for Modbus on front face8 bits, odd even or no configurable parity for Modbus on terminal type of polarizationNo impedance for Modbus number of addresses1…127 for CANopen1…247 for Modbus method of accessSlave CANopen function availableSafe standstill for power circuitPTC relay for power circuitPt100 relay for power circuitInsulation monitoring for power circuitDesign for IT networks for power circuitExternal 230 V supply terminals for power circuitBuffer voltage 24 V DC power supply for power circuitEnclosure lighting for power circuitKey switch (local/remote) for power circuitMotor heating for power circuitExternal motor fan for power circuitVoltmeter for power circuitDoor handle for main switch for power circuitLine contactor for power circuit12-pulse supply for power circuitAmmeter for power circuitEnclosure heating for power circuitMotor choke for power circuitCable entry via the top for power circuitEnclosure plinth for power circuitBraking unit for power circuitRelay output C/O for control circuitExternal 24 V DC supply terminals for power circuitControl terminals for control circuitAdaptor for 115 V logic inputs for control circuitIsolated amplifier for control circuit option cardCommunication card for APOGEE FLNCommunication card for BACnetCommunication card for CC-LinkCommunication card for DeviceNetCommunication card for Ethernet/IPCommunication card for FipioCommunication card for Interbus-SCommunication card for LonWorksCommunication card for METASYS N2Communication card for Modbus PlusCommunication card for Modbus TCPCommunication card for Modbus/Uni-TelwayCommunication card for Profibus DPCommunication card for Profibus DP V1Controller inside programmable cardMulti-pump cardBasic I/O extension cardExtended I/O extension cardEncoder interface cards operating positionVertical +/- 10 degree colour of enclosureLight grey (RAL 7035) width800 mm height2162 mm depth642 mm net weight485 kg Environment electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-4Electrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Voltage dips and interruptions immunity test conforming to IEC 61000-4-11 standardsEN 61800-3 environments 2 category C3EN 55011 class A group 2EN 61800-3 environments 1 category C3EN/IEC 61800-5-1EN/IEC 61800-3 product certificationsGOSTATEX markingCE noise level66 dB pollution degree2 conforming to EN/IEC 61800-5-1 vibration resistance0.6 gn (f= 10…200 Hz) conforming to EN/IEC 60068-2-61.5 mm peak to peak (f= 3…10 Hz) conforming to EN/IEC 60068-2-63M3 conforming to EN/IEC 60721-3-3 shock resistance4 gn for 11 ms conforming to EN/IEC 60068-2-273M2 conforming to EN/IEC 60721-3-3 environmental characteristic3C2 without condensation conforming to IEC 60721-3-33S2 without condensation conforming to IEC 60721-3-33K3 without condensation conforming to IEC 60721-3-3 relative humidity0…95 % ambient air temperature for operation0…40 °C (without)40…50 °C (with current derating of 1.8 % per °C) ambient air temperature for storage-25…70 °C volume of cooling air1200 m3/h operating altitude<= 1000 m without1000...3000 m with current derating 1 % per 100 m Contractual warranty Warranty18 months
User guideFormatSizeAdd to My DocumentsSize pdfSize 180.5 KBDate 4/23/14DescriptionShort-Circuit Current Ratings (SCCR) and branch circuit protection
- All Languages11
Software and FirmwareLanguage
Software - ReleasedFormatSizeAdd to My DocumentsDTM filesFormatSizeAdd to My DocumentsSize zipSize 422.7 MBDate 5/2/18
- All Languages2
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsIP 23 Floor-Standing Enclosure Compact VersionStandard Compact Floor-Standing EnclosureStandard Compact Floor-Standing Enclosure + Additional Floor-Standing Enclosures, According to the Configuration(1)Seal. For each floor-standing enclosure added, allow a 4 mm/0.15 in. space for the seal.(2)Standard IP 23 compact version floor-standing enclosure.
NOTE: The position of the enclosures must be complied with during installation. The number of additional enclosures can vary according to the chosen configuration.
With or without common options or options (6) dependent on the drive rating
816 mm/32.1 in.
816 mm/32.1 in.
Cable entry via the top option (4)
808 mm/31.8 in.
408 mm/16 in.
1220 mm/48 in.
Sinus filter option
808 mm/31.8 in.
608 mm/23.9 in.
1420 mm/55.9 in.(3)Except sinus filter option, which requires an additional enclosure. The sinus filter option is not compatible with the cable entry via the top option.(4)The cable entry via the top option is not compatible with the sinus filter option.
Connections and SchemaFloor-Standing Enclosure Compact VersionWiring DiagramA1DriveA2EnclosureF1Fast-acting semi-conductor fuseIL1Line chokeQ1Switch(1)Fault relay contacts. For remote signalling of drive status.
Performance CurvesReady to Use IP 54 EnclosureDerating Curves
The derating curves for the drive nominal current (In) are dependent on the temperature and switching frequency. For intermediate temperatures, interpolate between 2 curves.
NOTE: The drive will reduce the switching frequency automatically in the event of excessive temperature rise.XSwitching frequency (kHz)
NOTE: The temperatures shown correspond to the temperature of the air entering the enclosure.