Main range of productAltivar Machine ATV340 product or component typeVariable speed drive device applicationMachine device short nameATV340 variantStandard version product destinationSynchronous motorsAsynchronous motors mounting modeCabinet mount EMC filterIntegrated with 20 m conforming to EN/IEC 61800-3 category C3 IP degree of protectionIP20 conforming to IEC 61800-5-1IP20 conforming to IEC 60529 type of coolingForced convection supply frequency50...60 Hz +/- 5 % network number of phases3 phases [Us] rated supply voltage380...480 V - 15...10 % motor power kW11 kW for normal duty7.5 kW for heavy duty motor power hp15 hp for normal duty10 hp for heavy duty line current25.6 A at 380 V without line choke (heavy duty)20.4 A at 480 V without line choke (heavy duty)22 A at 380 V with external line choke (normal duty)17.7 A at 480 V with external line choke (normal duty)14.6 A at 380 V with external line choke (heavy duty)12.1 A at 480 V with external line choke (heavy duty) prospective line Isc22 kA apparent power17 kVA at 480 V (normal duty)17 kVA at 480 V (heavy duty) continuous output current24 A at 4 kHz for normal duty16.5 A at 4 kHz for heavy duty maximum transient current26.4 A during 60 s (normal duty)24.8 A during 60 s (heavy duty)32.4 A during 2 s (normal duty)29.7 A during 2 s (heavy duty) asynchronous motor control profileVariable torque standardConstant torque standardOptimized torque mode synchronous motor control profileReluctance motorPermanent magnet motor speed drive output frequency0.1…599 Hz nominal switching frequency4 kHz switching frequency2...16 kHz adjustable4...16 kHz with derating factor safety functionSTO (safe torque off) SIL 3 Complementary number of preset speeds16 preset speeds communication port protocolEthernet/IPModbus serialModbus TCP option cardSlot GP-X: digital and analog I/O extension moduleSlot GP-X: output relay extension moduleSlot GP-ENC: 5/12 V digital encoder interface moduleSlot GP-ENC: analog encoder interface moduleSlot GP-ENC: resolver encoder interface module output voltage<= power supply voltage permissible temporary current boost1.1 x In during 60 s (normal duty)1.35 x In during 2 s (normal duty)1.5 x In during 60 s (heavy duty)1.8 x In during 2 s (heavy duty) motor slip compensationAutomatic whatever the loadNot available in permanent magnet motor lawCan be suppressedAdjustable acceleration and deceleration rampsS, U or customizedLinear adjustable separately from 0.01...9999 s braking to standstillBy DC injection protection typeThermal protection: motorSafe torque off: motorMotor phase loss: motorThermal protection: driveSafe torque off: driveOverheating: driveOvercurrent: driveOutput overcurrent between motor phase and earth: driveOutput overcurrent between motor phases: driveShort-circuit between motor phase and earth: driveShort-circuit between motor phases: driveMotor phase loss: driveDC Bus overvoltage: driveLine supply overvoltage: driveLine supply undervoltage: driveInput supply loss: driveExceeding limit speed: driveBreak on the control circuit: drive frequency resolutionDisplay unit: 0.1 HzAnalog input: 0.012/50 Hz electrical connectionDC bus: screw terminal4...6 mm²/AWG 12...AWG 10Control: screw terminal0.2...2.5 mm²/AWG 24...AWG 12Motor: screw terminal1.5...6 mm²/AWG 14...AWG 10Line side: screw terminal2.5...6 mm²/AWG 12...AWG 10 connector typeconnector(s)1 x RJ45, Modbus serial on front face connector(s)1 x RJ45, Modbus serial for HMI on front face connector(s)2 x RJ45, Ethernet IP/Modbus TCP on front face physical interface2-wire RS 485 for Modbus serial transmission frameRTU for Modbus serial transmission rate4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus serial10/100 Mbit/s for Ethernet IP/Modbus TCP exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP data format8 bits, configurable odd, even or no parity for Modbus serial type of polarizationNo impedance for Modbus serial number of addresses1…247 for Modbus serial method of accessSlave Modbus RTUSlave Modbus TCP supplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protectionInternal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection local signallingLocal diagnostic: 4 LED (mono/dual colour)Communication module status: 4 LED (dual colour) width110 mm height270 mm depth234 mm net weight3 kg analogue input number2 analogue input typeAI1 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI1 software-configurable temperature probe or water level sensorAI1 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bitsAI2 software-configurable voltage: - 10...10 V DC, impedance: 20 kOhm, resolution 12 bits discrete input number8 discrete input typePTI programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)STOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhmDI1...DI5 programmable, 24 V DC (<= 30 V), impedance: 4.4 kOhm input compatibilityDI1...DI5: discrete input level 1 PLC conforming to EN/IEC 61131-2PTI: pulse input level 1 PLC conforming to IEC 65A-68STOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2 discrete input logicPositive logic (source) (DI1...DI5), < 5 V (state 0), > 11 V (state 1)Negative logic (sink) (DI1...DI5), > 16 V (state 0), < 10 V (state 1)Positive logic (source) (PTI), < 0.6 V (state 0), > 2.5 V (state 1)Positive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1) analogue output number1 analogue output typeSoftware-configurable voltage AQ1: 0...10 V DC impedance 470 Ohm, resolution 10 bitsSoftware-configurable current AQ1: 0...20 mA impedance 500 Ohm, resolution 10 bits input/output typeProgrammable as logic input/output DQ1: 0…1 kHz, <= 30 V DC, 100 mAProgrammable as logic input/output DQ2: 0…1 kHz, <= 30 V DC, 100 mA sampling duration2 ms +/- 0.5 ms (DI1...DI5) - discrete input5 ms +/- 1 ms (PTI) - pulse input1 ms +/- 1 ms (AI1, AI2) - analog input5 ms +/- 1 ms (AQ1) - analog output2 ms +/- 0.5 ms (DQ1, DQ2) - discrete input/output accuracy+/- 0.6 % AI1, AI2 for a temperature variation 60 °C analog input+/- 1 % AQ1 for a temperature variation 60 °C analog output linearity errorAI1, AI2: +/- 0.15 % of maximum value for analog inputAQ1: +/- 0.2 % for analog output relay output number2 relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cycles refresh timeRelay output (R1, R2): 5 ms (+/- 0.5 ms) minimum switching currentRelay output R1, R2: 5 mA at 24 V DC maximum switching currentRelay output R1 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DCRelay output R2 on resistive load, cos phi = 1: 5 A at 250 V ACRelay output R2 on resistive load, cos phi = 1: 5 A at 30 V DCRelay output R2 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R2 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Environment isolationBetween power and control terminals insulation resistance> 1 MOhm 500 V DC for 1 minute to earth noise level46.5 dB conforming to 86/188/EEC power dissipation in WNatural convection: 180 W at 380 V, switching frequency 4 kHz (heavy duty)Forced convection: 180 W at 380 V, switching frequency 4 kHz (heavy duty)Natural convection: 249 W at 380 V, switching frequency 4 kHz (normal duty)Forced convection: 249 W at 380 V, switching frequency 4 kHz (normal duty) operating positionVertical +/- 10 degree electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 pollution degree2 conforming to EN/IEC 61800-5-1 vibration resistance1.5 mm peak to peak (f= 2…19 Hz) conforming to EN/IEC 60721-3-3 class 3M31 gn (f= 9…200 Hz) conforming to EN/IEC 60721-3-3 class 3M3 shock resistance15 gn for 11 ms, class 3M3 conforming to EN/IEC 60721-3-3 relative humidity5…95 % without condensation conforming to EN/IEC 60721-3-3 class 3K3 ambient air temperature for operation-15…50 °C without current derating (heavy duty)-15…40 °C without current derating (normal duty)50…60 °C with current derating (heavy duty)40…60 °C with current derating (normal duty) ambient air temperature for storage-40…70 °C operating altitude<= 1000 m without1000...3000 m with current derating 1 % per 100 m environmental characteristicChemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 standardsEN/IEC 61800-3Environment 1 category C2 EN/IEC 61800-3Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 60721-3 IEC 61508 IEC 13849-1 UL 618000-5-1 product certificationsREACHCSATÜVUL markingCE Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectiveNot applicable, out of EU RoHS legal scope Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My Documents1) ATV340 Getting Started Annex: SCCR & branch circuit protection (Version 03)CADSizeAdd to My DocumentsCAD file (on TraceParts) for ATV340U75N4E: variable speed drive - 7.5kW- 400V - 3 phases - ATV340 Ethernet (Version 2.0)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsInstruction Sheet - Resolver Encoder interface module: VW3A3423 (Version 00)Instruction Sheet - Extension module Digital and Analog I/O: VW3A3203 (Version 01)Instruction Sheet - Extension module of Output relays: VW3A3204 (Version 02)Catalogue pageSizeAdd to My DocumentsMachine Solution/Application/Presentation/Function/Description (Version 1.0)Option: Dialog tools, configuration tools, SoMove software (Version 1.0)Combination of Drive with accessories/Options (Encoder and extension I/O modules, Braking resistor, EMC filter, Line chokes) (Version 1.0)End of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Software and FirmwareLanguage
Software - ReleasedSizeAdd to My DocumentsDTM filesSizeAdd to My DocumentsAltivar Machine ATV340 DTM Library (Version 1.7.0)EDS filesSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.