Main range of productAltivar Machine ATV340 product or component typeVariable speed drive device applicationMachine device short nameATV340 variantStandard version product destinationAsynchronous motorsSynchronous motors mounting modeWall mount EMC filterIntegrated with 150 m conforming to EN/IEC 61800-3 category C3 IP degree of protectionIP20 conforming to IEC 61800-5-1IP20 conforming to IEC 60529 degree of protectionUL type 1 conforming to UL 508C type of coolingForced convection supply frequency50...60 Hz +/- 5 % network number of phases3 phases [Us] rated supply voltage380...480 V - 15...10 % motor power kW75 kW for normal duty55 kW for heavy duty motor power hp100 hp for normal duty75 hp for heavy duty line current131.3 A at 380 V with internal line choke (normal duty)112.7 A at 480 V with internal line choke (normal duty)98.9 A at 380 V with internal line choke (heavy duty)86.9 A at 480 V with internal line choke (heavy duty)98.9 A86.9 A prospective line Isc50 kA apparent power93.7 kVA at 480 V (normal duty)72.2 kVA at 480 V (heavy duty) continuous output current145 A at 4 kHz for normal duty106 A at 4 kHz for heavy duty maximum transient current174 A during 60 s (normal duty)159 A during 60 s (heavy duty)174 A during 2 s (normal duty)159 A during 2 s (heavy duty) asynchronous motor control profileVariable torque standardOptimized torque modeConstant torque standard synchronous motor control profileReluctance motorPermanent magnet motor speed drive output frequency0.1…500 Hz nominal switching frequency2.5 kHz switching frequency1...8 kHz adjustable2.5...8 kHz with derating factor safety functionSTO (safe torque off) SIL 3 Complementary number of preset speeds16 preset speeds communication port protocolEthernet/IPModbus TCPModbus serial option cardSlot GP-X: digital and analog I/O extension moduleSlot GP-X: output relay extension moduleSlot GP-ENC: 5/12 V digital encoder interface moduleSlot GP-ENC: analog encoder interface moduleSlot GP-ENC: resolver encoder interface module output voltage<= power supply voltage permissible temporary current boost1.5 x In during 60 s (heavy duty)1.2 x In during 60 s (normal duty) motor slip compensationNot available in permanent magnet motor lawAutomatic whatever the loadCan be suppressedAdjustable acceleration and deceleration rampsLinear adjustable separately from 0.01...9999 sS, U or customized braking to standstillBy DC injection protection typeThermal protection: motorSafe torque off: motorMotor phase loss: motorThermal protection: driveSafe torque off: driveOverheating: driveOvercurrent: driveOutput overcurrent between motor phase and earth: driveOutput overcurrent between motor phases: driveShort-circuit between motor phase and earth: driveShort-circuit between motor phases: driveMotor phase loss: driveDC Bus overvoltage: driveLine supply overvoltage: driveLine supply undervoltage: driveInput supply loss: driveExceeding limit speed: driveBreak on the control circuit: drive frequency resolutionDisplay unit: 0.1 HzAnalog input: 0.012/50 Hz electrical connectionControl: screw terminal0.75...1.5 mm²/AWG 18...AWG 16DC bus: screw terminal70...120 mm²/AWG 1/0...250 kcmilLine side: screw terminal95...120 mm²/AWG 3/0...250 kcmilMotor: screw terminal95...120 mm²/AWG 3/0...250 kcmil connector typeconnector(s)1 x RJ45, Modbus serial on front face connector(s)1 x RJ45, Modbus serial for HMI on front face connector(s)2 x RJ45, Ethernet IP/Modbus TCP on front face physical interface2-wire RS 485 for Modbus serial transmission frameRTU for Modbus serial transmission rate4800 bps, 9600 bps, 19200 bps, 38.4 Kbps for Modbus serial10/100 Mbit/s for Ethernet IP/Modbus TCP exchange modeHalf duplex, full duplex, autonegotiation Ethernet IP/Modbus TCP data format8 bits, configurable odd, even or no parity for Modbus serial type of polarizationNo impedance for Modbus serial number of addresses1…247 for Modbus serial method of accessSlave Modbus RTUSlave Modbus TCP supplyExternal supply for digital inputs: 24 V DC (19…30 V), <1.25 mA, protection type: overload and short-circuit protectionInternal supply for reference potentiometer (1 to 10 kOhm): 10.5 V DC +/- 5 %, <10 mA, protection type: overload and short-circuit protectionInternal supply for digital inputs and STO: 24 V DC (21…27 V), <200 mA, protection type: overload and short-circuit protection local signallingLocal diagnostic: 3 LED (mono/dual colour)Embedded communication status: 5 LED (dual colour)Communication module status: 2 LED (dual colour)Presence of voltage: 1 LED (red) width271 mm height908 mm depth309 mm net weight57.9 kg analogue input number3 analogue input typeAI1, AI2, AI3 software-configurable voltage: 0...10 V DC, impedance: 31.5 kOhm, resolution 12 bitsAI1, AI3 software-configurable current: 0...20 mA, impedance: 250 Ohm, resolution 12 bitsAI1, AI3 software-configurable temperature probe or water level sensor discrete input number10 discrete input typeSTOA, STOB safe torque off, 24 V DC (<= 30 V), impedance: > 2.2 kOhmDI7, DI8 programmable as pulse input: 0…30 kHz, 24 V DC (<= 30 V)DI1...DI8 programmable, 24 V DC (<= 30 V), impedance: 4.4 kOhm input compatibilitySTOA, STOB: discrete input level 1 PLC conforming to EN/IEC 61131-2DI1...DI8: discrete input level 1 PLC conforming to EN/IEC 61131-2DI7, DI8: pulse input level 1 PLC conforming to IEC 65A-68 discrete input logicPositive logic (source) (STOA, STOB), < 5 V (state 0), > 11 V (state 1)Positive logic (source) (DI1...DI8), < 5 V (state 0), > 11 V (state 1)Negative logic (sink) (DI1...DI8), > 16 V (state 0), < 10 V (state 1)Positive logic (source) (DI7, DI8), < 0.6 V (state 0), > 2.5 V (state 1) analogue output number2 analogue output typeSoftware-configurable voltage AQ1, AQ2: 0...10 V DC impedance 470 Ohm, resolution 10 bitsSoftware-configurable current AQ1, AQ2: 0...20 mA impedance 500 Ohm, resolution 10 bits discrete output number2 input/output typeLogic output DQ-: 0…1 kHz, <= 30 V DC, 100 mALogic output DQ+: 0…1 kHz, <= 30 V DC, 100 mAProgrammable as pulse output DQ+: 0…30 kHz, <= 30 V DC, 20 mA sampling duration2 ms +/- 0.5 ms (DI1...DI8) - discrete input5 ms +/- 1 ms (DI7, DI8) - pulse input1 ms +/- 1 ms (AI1, AI2, AI3) - analog input5 ms +/- 1 ms (AQ1, AQ2) - analog output accuracy+/- 0.6 % AI1, AI2, AI3 for a temperature variation 60 °C analog input+/- 1 % AQ1, AQ2 for a temperature variation 60 °C analog output linearity errorAI1, AI2, AI3: +/- 0.15 % of maximum value for analog inputAQ1, AQ2: +/- 0.2 % for analog output relay output number3 relay output typeConfigurable relay logic R1: fault relay NO/NC electrical durability 100000 cyclesConfigurable relay logic R2: sequence relay NO electrical durability 100000 cyclesConfigurable relay logic R3: sequence relay NO electrical durability 100000 cycles refresh timeRelay output (R1, R2, R3): 5 ms (+/- 0.5 ms) minimum switching currentRelay output R1, R2, R3: 5 mA at 24 V DC maximum switching currentRelay output R1 on resistive load, cos phi = 1: 3 A at 250 V ACRelay output R1 on resistive load, cos phi = 1: 3 A at 30 V DCRelay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R1 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DCRelay output R2, R3 on resistive load, cos phi = 1: 5 A at 250 V ACRelay output R2, R3 on resistive load, cos phi = 1: 5 A at 30 V DCRelay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 250 V ACRelay output R2, R3 on inductive load, cos phi = 0.4 and L/R = 7 ms: 2 A at 30 V DC Environment isolationBetween power and control terminals insulation resistance> 1 MOhm 500 V DC for 1 minute to earth noise level62.4 dB conforming to 86/188/EEC power dissipation in WNatural convection: 115 W at 380 V, switching frequency 4 kHz (heavy duty)Forced convection: 917 W at 380 V, switching frequency 4 kHz (heavy duty)Natural convection: 158 W at 380 V, switching frequency 4 kHz (normal duty)Forced convection: 1359 W at 380 V, switching frequency 4 kHz (normal duty) volume of cooling air295 m3/h operating positionVertical +/- 10 degree electromagnetic compatibilityElectrostatic discharge immunity test level 3 conforming to IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 conforming to IEC 61000-4-3Electrical fast transient/burst immunity test level 4 conforming to IEC 61000-4-41.2/50 µs - 8/20 µs surge immunity test level 3 conforming to IEC 61000-4-5Conducted radio-frequency immunity test level 3 conforming to IEC 61000-4-6 pollution degree2 conforming to EN/IEC 61800-5-1 vibration resistance1.5 mm peak to peak (f= 2…13 Hz) conforming to IEC 60068-2-61 gn (f= 13…200 Hz) conforming to IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to IEC 60068-2-27 relative humidity5…95 % without condensation conforming to IEC 60068-2-3 ambient air temperature for operation50…60 °C with current derating (heavy duty)40…60 °C with current derating (normal duty)-15…50 °C without current derating (heavy duty)-15…40 °C without current derating (normal duty) ambient air temperature for storage-40…70 °C operating altitude<= 1000 m without1000...4800 m with current derating 1 % per 100 m environmental characteristicChemical pollution resistance class 3C3 conforming to EN/IEC 60721-3-3Dust pollution resistance class 3S3 conforming to EN/IEC 60721-3-3 standardsUL 508C EN/IEC 61800-3Environment 1 category C2 EN/IEC 61800-3Environment 2 category C3 EN/IEC 61800-3 EN/IEC 61800-5-1 IEC 61000-3-12 IEC 60721-3 IEC 61508 IEC 13849-1 product certificationsULTÜVCSAREACH markingCE Offer Sustainability Sustainable offer statusGreen Premium product REACh Regulation EU RoHS DirectivePro-active compliance (Product out of EU RoHS legal scope)
EU RoHS Declaration
Mercury freeYes RoHS exemption information China RoHS Regulation Environmental Disclosure Circularity Profile WEEEThe product must be disposed on European Union markets following specific waste collection and never end up in rubbish bins
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My Documents1) ATV340 Getting Started Annex: SCCR & branch circuit protection (Version 03)CADSizeAdd to My DocumentsCAD file (on TraceParts) for ATV340D55N4E: variable speed drive - 55kW- 400V - 3 phases - ATV340 Ethernet (Version 2.0)CertificateSizeAdd to My DocumentsInstruction sheetSizeAdd to My DocumentsInstruction Sheet - EMC Filters: VW3A4420...A4426, 4461, 4462 (Version 08)Instruction Sheet - Extension module Digital and Analog I/O: VW3A3203 (Version 01)Instruction Sheet - Extension module of Output relays: VW3A3204 (Version 02)Instruction sheet- Altivar Flush mounting kit - NSYPTDS4 NSYPTDS5 (Version 01)Catalogue pageSizeAdd to My DocumentsOption: Dialog tools, configuration tools, SoMove software (Version 1.0)Machine Solution/Application/Presentation/Function/Description (Version 1.0)Combination of Drive with accessories/Options (Encoder and extension I/O modules, Braking resistor, EMC filter, Line chokes) (Version 1.0)End of Life InformationSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Software and FirmwareLanguage
Software - ReleasedSizeAdd to My DocumentsDTM filesSizeAdd to My DocumentsEDS filesSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.