Global (English)

Welcome to the Schneider Electric corporate Website


You can choose another country to view available products or go to our Global website for company information.

Choose your country or region

variable speed drive ATV312 - 5.5kW - 15kVA - 232W - 380..500 V- 3-phase supply

Show more characteristics >
Add to My Products Remove from My Products

ATV312HU55N4B is replaced by:
Add to My Products Remove from My Products
  • Reason for Substitution: End of life
  • Substitution date: 01 September 2016
  • Main
    range of product
    Altivar 312
    product or component type
    Variable speed drive
    product destination
    Asynchronous motors
    product specific application
    Simple machine
    assembly style
    With heat sink
    component name
    motor power kW
    5.5 kW
    motor power hp
    7.5 hp
    [Us] rated supply voltage
    380...500 V (- 15...10 %)
    supply frequency
    50...60 Hz (- 5...5 %)
    network number of phases
    3 phases
    line current
    21.9 A for 380 V, 22 kA
    16.5 A for 500 V
    EMC filter
    apparent power
    15 kVA
    maximum transient current
    21.5 A for 60 s
    power dissipation in W
    232 W at nominal load
    speed range
    asynchronous motor control profile
    Factory set : constant torque
    Sensorless flux vector control with PWM type motor control signal
    electrical connection
    L1, L2, L3, U, V, W, PA, PB, PA/+, PC/- terminal 16 mm² AWG 6
    Internal supply for logic inputs at 19...30 V, <= 100 mA for overload and short-circuit protection
    Internal supply for reference potentiometer (2.2 to 10 kOhm) at 10...10.8 V, <= 10 mA for overload and short-circuit protection
    communication port protocol
    IP degree of protection
    IP20 on upper part without cover plate
    IP21 on connection terminals
    IP31 on upper part
    IP41 on upper part
    option card
    CANopen daisy chain communication card
    DeviceNet communication card
    Fipio communication card
    Modbus TCP communication card
    Profibus DP communication card
    supply voltage limits
    323...550 V
    network frequency
    47.5...63 Hz
    prospective line Isc
    22 kA
    continuous output current
    14.3 A at 4 kHz
    output frequency
    0...500 kHz
    nominal switching frequency
    4 kHz
    switching frequency
    2...16 kHz adjustable
    transient overtorque
    170...200 % of nominal motor torque
    braking torque
    100 % with braking resistor continuously
    150 % without braking resistor
    150 % with braking resistor for 60 s
    regulation loop
    Frequency PI regulator
    motor slip compensation
    Automatic whatever the load
    output voltage
    <= power supply voltage
    tightening torque
    2.5 N.m L1, L2, L3, U, V, W, PA, PB, PA/+, PC/-
    Electrical between power and control
    acceleration and deceleration ramps
    Linear adjustable separately from 0.1 to 999.9 s
    S, U or customized
    braking to standstill
    By DC injection
    protection type
    Input phase breaks drive
    Line supply overvoltage and undervoltage safety circuits drive
    Line supply phase loss safety function, for three phases supply drive
    Motor phase breaks drive
    Overcurrent between output phases and earth (on power up only) drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor
    insulation resistance
    >= 500 mOhm at 500 V DC for 1 minute
    local signalling
    1 LED red for drive voltage
    Four 7-segment display units for CANopen bus status
    time constant
    5 ms for reference change
    frequency resolution
    Analog input 0.1...100 Hz
    Display unit 0.1 Hz
    connector type
    1 RJ45 Modbus/CANopen
    physical interface
    RS485 multidrop serial link
    transmission frame
    transmission rate
    10, 20, 50, 125, 250, 500 kbps or 1 Mbps CANopen
    4800, 9600 or 19200 bps Modbus
    number of addresses
    1...247 Modbus
    1...127 CANopen
    number of drive
    127 CANopen
    31 Modbus
    operating position
    Vertical +/- 10 degree
    outer dimension
    232 x 180 x 170 mm
    300 x 210 x 170 mm
    402 x 239 x 192 mm
    442 x 239 x 192 mm
    232 mm
    180 mm
    172 mm
    product weight
    6.5 kg
    dielectric strength
    2410 V DC between earth and power terminals
    3400 V AC between control and power terminals
    electromagnetic compatibility
    Electrical fast transient/burst immunity test conforming to IEC 61000-4-4 level 4
    Electrostatic discharge immunity test conforming to IEC 61000-4-2 level 3
    Radiated radio-frequency electromagnetic field immunity test conforming to IEC 61000-4-3 level 3
    1.2/50 µs - 8/20 µs surge immunity test conforming to IEC 61000-4-5 level 3
    IEC 61800-3
    IEC 61800-5-1
    product certifications
    pollution degree
    protective treatment
    vibration resistance
    1.5 mm (f = 3...13 Hz) conforming to EN/IEC 60068-2-6
    1 gn (f = 13...150 Hz) conforming to EN/IEC 60068-2-6
    shock resistance
    15 gn for 11 ms conforming to EN/IEC 60068-2-27
    relative humidity
    5...95 % without condensation conforming to IEC 60068-2-3
    5...95 % without dripping water conforming to IEC 60068-2-3
    ambient air temperature for storage
    -25...70 °C
    ambient air temperature for operation
    -10...50 °C without derating with protective cover on top of the drive
    -10...60 °C with derating factor without protective cover on top of the drive
    operating altitude
    <= 1000 m without derating
    1000...3000 m with current derating 1 % per 100 m
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    Product environmental profile
    Product end of life instructions
    Contractual warranty
    Warranty period
    18 months
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.