Global (English)

Welcome to the Schneider Electric corporate Website

ENGLISH | FRENCH

You can choose another country to view available products or go to our Global website for company information.

Choose your country or region

Schneider Electric ATV212HU55N4 Image

View all Altivar 212

Altivar 212 - ATV212HU55N4

HVAC solutions

Schneider Electric ATV212HU55N4 Image
View all Altivar 212
Altivar 212 - ATV212HU55N4
HVAC solutions

variable speed drive ATV212 - 5.5kW - 7.5hp - 480V - 3ph - EMC - IP21

Show more characteristics >
Add to My Products Remove from My Products

  • Main
    range of product
    Altivar 212
    product or component type
    Variable speed drive
    device short name
    ATV212
    product destination
    Asynchronous motors
    product specific application
    Pumps and fans in HVAC
    assembly style
    With heat sink
    network number of phases
    3 phases
    motor power kW
    5.5 kW
    motor power hp
    7.5 hp
    [Us] rated supply voltage
    380...480 V - 15...10 %
    supply voltage limits
    323...528 V
    supply frequency
    50...60 Hz - 5...5 %
    network frequency
    47.5...63 Hz
    EMC filter
    Class C2 EMC filter integrated
    line current
    8.6 A 480 V
    10.9 A 380 V
    Complementary
    apparent power
    9.1 kVA 380 V
    prospective line Isc
    22 kA
    continuous output current
    12 A 380 V
    12 A 460 V
    maximum transient current
    13.2 A 60 s
    speed drive output frequency
    0.5...200 Hz
    nominal switching frequency
    12 kHz
    switching frequency
    12...16 kHz with derating factor
    6...16 kHz adjustable
    speed range
    1...10
    speed accuracy
    +/- 10 % of nominal slip 0.2 Tn to Tn
    torque accuracy
    +/- 15 %
    transient overtorque
    120 % of nominal motor torque +/- 10 % 60 s
    asynchronous motor control profile
    Voltage/frequency ratio, 2 points
    Voltage/frequency ratio, 5 points
    Flux vector control without sensor, standard
    Voltage/frequency ratio - Energy Saving, quadratic U/f
    Voltage/frequency ratio, automatic IR compensation (U/f + automatic Uo)
    regulation loop
    Adjustable PI regulator
    motor slip compensation
    Adjustable
    Automatic whatever the load
    Not available in voltage/frequency ratio motor control
    local signalling
    1 LED red DC bus energized
    output voltage
    <= power supply voltage
    isolation
    Electrical between power and control
    type of cable
    IEC cable without mounting kit 1 45 °C copper 90 °C XLPE/EPR
    IEC cable without mounting kit 1 45 °C copper 70 °C PVC
    UL 508 cable with UL Type 1 kit 3 40 °C copper 75 °C PVC
    electrical connection
    Terminal 2.5 mm² AWG 14 VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES
    Terminal 6 mm² AWG 10 L1/R, L2/S, L3/T
    tightening torque
    1.3 N.m 11.5 lb.in L1/R, L2/S, L3/T
    0.6 N.m VIA, VIB, FM, FLA, FLB, FLC, RY, RC, F, R, RES
    supply
    Internal supply for reference potentiometer (1 to 10 kOhm) 10.5 V DC +/- 5 % <= 10 A overload and short-circuit protection
    Internal supply 24 V DC 21...27 V <= 200 A overload and short-circuit protection
    analogue input number
    2
    analogue input type
    Switch-configurable voltage VIA 0...10 V DC 24 V max 30000 Ohm 10 bits
    Configurable voltage VIB 0...10 V DC 24 V max 30000 Ohm 10 bits
    Configurable PTC probe VIB 0...6 probes 1500 Ohm
    Switch-configurable current VIA 0...20 mA 250 Ohm 10 bits
    sampling duration
    2 ms +/- 0.5 ms F discrete
    2 ms +/- 0.5 ms R discrete
    2 ms +/- 0.5 ms RES discrete
    3.5 ms +/- 0.5 ms VIA analog
    22 ms +/- 0.5 ms VIB analog
    response time
    2 ms +/- 0.5 ms FM analog
    7 ms +/- 0.5 ms FLA, FLC discrete
    7 ms +/- 0.5 ms FLB, FLC discrete
    7 ms +/- 0.5 ms RY, RC discrete
    accuracy
    +/- 0.6 % VIA for a temperature variation 60 °C
    +/- 0.6 % VIB for a temperature variation 60 °C
    +/- 1 % FM for a temperature variation 60 °C
    linearity error
    +/- 0.15 % of maximum value input VIA
    +/- 0.15 % of maximum value input VIB
    +/- 0.2 % output FM
    analogue output number
    1
    analogue output type
    Switch-configurable voltage FM 0...10 V DC 7620 Ohm 10 bits
    Switch-configurable current FM 0...20 mA 970 Ohm 10 bits
    discrete output number
    2
    discrete output type
    Configurable relay logic FLA, FLC NO 100000 cycles
    Configurable relay logic FLB, FLC NC 100000 cycles
    Configurable relay logic RY, RC NO 100000 cycles
    minimum switching current
    3 mA 24 V DC configurable relay logic
    maximum switching current
    5 A 250 V AC resistive cos phi = 1 L/R = 0 ms FL, R
    5 A 30 V DC resistive cos phi = 1 L/R = 0 ms FL, R
    2 A 250 V AC inductive cos phi = 0.4 L/R = 7 ms FL, R
    2 A 30 V DC inductive cos phi = 0.4 L/R = 7 ms FL, R
    discrete input type
    Programmable F 24 V DC level 1 PLC 4700 Ohm
    Programmable R 24 V DC level 1 PLC 4700 Ohm
    Programmable RES 24 V DC level 1 PLC 4700 Ohm
    discrete input logic
    Positive logic (source) F, R, RES <= 5 V >= 11 V
    Negative logic (sink) F, R, RES >= 16 V <= 10 V
    acceleration and deceleration ramps
    Automatic based on the load
    Linear adjustable separately from 0.01 to 3200 s
    braking to standstill
    By DC injection
    protection type
    Motor phase break motor
    Break on the control circuit drive
    Thermal power stage drive
    Overvoltages on the DC bus drive
    Against exceeding limit speed drive
    Against input phase loss drive
    With PTC probes motor
    Input phase breaks drive
    Line supply overvoltage and undervoltage drive
    Line supply undervoltage drive
    Overcurrent between output phases and earth drive
    Overheating protection drive
    Short-circuit between motor phases drive
    Thermal protection motor
    dielectric strength
    3535 V DC between earth and power terminals
    5092 V DC between control and power terminals
    insulation resistance
    >= 1 MOhm 500 V DC for 1 minute
    frequency resolution
    0.024/50 Hz analog input
    0.1 Hz display unit
    communication port protocol
    APOGEE FLN
    BACnet
    LonWorks
    METASYS N2
    Modbus
    connector type
    1 RJ45
    1 open style
    physical interface
    2-wire RS 485
    transmission frame
    RTU
    transmission rate
    9600 bps or 19200 bps
    data format
    8 bits, 1 stop, odd even or no configurable parity
    type of polarization
    No impedance
    number of addresses
    1...247
    communication service
    Monitoring inhibitable
    Read device identification (43)
    Read holding registers (03) 2 words maximum
    Time out setting from 0.1 to 100 s
    Write multiple registers (16) 2 words maximum
    Write single register (06)
    option card
    Communication card LonWorks
    operating position
    Vertical +/- 10 degree
    width
    142 mm
    height
    184 mm
    depth
    150 mm
    product weight
    3.35 kg
    power dissipation in W
    215 W
    air flow
    74 m3/h
    functionality
    Mid
    specific application
    HVAC
    IP degree of protection
    IP21
    discrete and process manufacturing
    Building - HVAC : compressor for scroll
    Building - HVAC : fan
    Building - HVAC : pump
    power range
    4...6 kW at 380...440 V 3 phases
    4...6 kW at 480...500 V 3 phases
    motor starter type
    Variable speed drive
    Environment
    electromagnetic compatibility
    Conducted radio-frequency immunity test level 3 IEC 61000-4-6
    Voltage dips and interruptions immunity test IEC 61000-4-11
    1.2/50 µs - 8/20 µs surge immunity test level 3 IEC 61000-4-5
    Electrical fast transient/burst immunity test level 4 IEC 61000-4-4
    Electrostatic discharge immunity test level 3 IEC 61000-4-2
    Radiated radio-frequency electromagnetic field immunity test level 3 IEC 61000-4-3
    pollution degree
    3 IEC 61800-5-1
    IP degree of protection
    IP20 on upper part without blanking plate on cover EN/IEC 61800-5-1
    IP20 on upper part without blanking plate on cover EN/IEC 60529
    IP21 EN/IEC 61800-5-1
    IP21 EN/IEC 60529
    IP41 on upper part EN/IEC 61800-5-1
    IP41 on upper part EN/IEC 60529
    vibration resistance
    1 gn 13...200 Hz EN/IEC 60068-2-8
    1.5 mm 3...13 Hz EN/IEC 60068-2-6
    shock resistance
    15 gn 11 ms IEC 60068-2-27
    environmental characteristic
    Classes 3C1 IEC 60721-3-3
    Classes 3S2 IEC 60721-3-3
    noise level
    51 dB 86/188/EEC
    operating altitude
    1000...3000 m limited to 2000 m for the Corner Grounded distribution network with current derating 1 % per 100 m
    <= 1000 m without derating
    relative humidity
    5...95 % without condensation IEC 60068-2-3
    5...95 % without dripping water IEC 60068-2-3
    ambient air temperature for operation
    -10...40 °C without derating
    > 40...50 °C with derating factor
    ambient air temperature for storage
    -25...70 °C
    standards
    EN 55011 class A group 1
    EN 61800-3
    EN 61800-3 category C2
    EN 61800-3 category C3
    EN 61800-3 environments 1 category C1
    EN 61800-3 environments 1 category C2
    EN 61800-3 environments 1 category C3
    EN 61800-3 environments 2 category C1
    EN 61800-3 environments 2 category C2
    EN 61800-3 environments 2 category C3
    EN 61800-5-1
    IEC 61800-3
    IEC 61800-3 category C2
    IEC 61800-3 category C3
    IEC 61800-3 environments 1 category C1
    IEC 61800-3 environments 1 category C2
    IEC 61800-3 environments 1 category C3
    IEC 61800-3 environments 2 category C1
    IEC 61800-3 environments 2 category C2
    IEC 61800-3 environments 2 category C3
    IEC 61800-5-1
    UL Type 1
    product certifications
    CSA
    C-Tick
    NOM 117
    UL
    marking
    CE
    Offer Sustainability
    Sustainable offer status
    Green Premium product
    RoHS (date code: YYWW)
    REACh
    Product environmental profile
    Product end of life instructions
    Available
    Contractual warranty
    Warranty period
    18 months
  • Documents and Downloads

    Language
    • English
    • Spanish
    • Danish
    • French
    • Finnish
    • Chinese
    • Norwegian
    • Dutch
    • Turkish
    • Russian
    • Czech
    • Polish
    • Italian
    • German
    • Swedish
    Software - Released
    Date
    Size
    Add to My Documents
    SoMove V2.6.5 (FDT Standalone)
    Date 6/19/18
    Size 234.4 MB
    Date 6/19/18
    Size 107.1 KB
    DTM files
    Date
    Size
    Add to My Documents
    Altivar DTM Library V12.8: ATV12, ATV31/312, ATV32, ATV61, ATV71, ATV LIFT, ATV212
    Catalogue
    Date
    Size
    Add to My Documents
    Date 12/14/17
    Size 16.6 MB
    Date 11/29/16
    Size 2.1 MB
    User guide
    Date
    Size
    Add to My Documents
    Date 2/17/17
    Size 1.7 MB
    Date 2/17/17
    Size 1.3 MB
    Date 2/17/17
    Size 1.3 MB
    Date 2/17/17
    Size 2 MB
    Date 2/17/17
    Size 1.3 MB
    Date 4/28/17
    Size 978.7 KB
    Date 11/14/16
    Size 5.1 MB
    Date 11/17/16
    Size 4.5 MB
    Date 11/17/16
    Size 4.6 MB
    Date 12/14/17
    Size 1.1 MB
    Date 4/28/17
    Size 3.6 MB
    Date 3/11/15
    Size 6.7 MB
    Date 3/11/15
    Size 5.6 MB
    Date 3/11/15
    Size 5.7 MB
    Date 10/20/15
    Size 5.6 MB
    Date 12/13/17
    Size 5.6 MB
    Date 12/13/17
    Size 3.5 MB
    Certificate
    Date
    Size
    Add to My Documents
    Date 5/31/18
    Size 2.3 MB
    Date 6/19/18
    Size 57.2 KB
    Date 4/27/18
    Size 682.4 KB
    Date 7/14/18
    Size 120 KB
    Date 7/18/18
    Size 1.7 MB
    Instruction sheet
    Date
    Size
    Add to My Documents
    Date 10/30/18
    Size 389.4 KB
    Date 10/30/18
    Size 675.9 KB
    Product environmental
    Date
    Size
    Add to My Documents
    REACh Declaration
    Date
    Size
    Add to My Documents
  • Technical FAQs

    No results found.
    Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
  • Dimensions Drawings

    Dimensions


    Dimensions in mm

    ATV212H

    a

    b

    G

    H

    J

    K

    Ø

    075M3X...U22M3X

    075N4...U22N4

    107

    143

    93

    121.5

    5

    16.5

    2 x Ø5

    U30M3X, U40M3X

    U30N4...U55N4

    142

    184

    126

    157

    6.5

    20.5

    4 x Ø5

    Dimensions in in.

    ATV212H

    a

    b

    G

    H

    J

    K

    Ø

    075M3X...U22M3X

    075N4...U22N4

    4.21

    5.63

    3.66

    4.78

    0.20

    0.65

    2 x Ø0.20

    U30M3X, U40M3X

    U30N4...U55N4

    5.59

    7.24

    4.96

    6.18

    0.26

    0.81

    4 x Ø0.20

    Plate for EMC mounting (supplied with the drive)


    (1)
    2 x M5 screws

    Dimensions in mm

    ATV212H

    b1

    c

    075M3X...U22M3X

    075N4...U22N4

    49

    67.3

    U30M3X, U40M3X

    U30N4...U55N4

    48

    88.8

    Dimensions in in.

    ATV212H

    b1

    c

    075M3X...U22M3X

    075N4...U22N4

    1.93

    2.65

    U30M3X, U40M3X

    U30N4...U55N4

    1.89

    3.50


  • Mounting and Clearance

    Mounting Recommendations
    Clearance

    Depending on the conditions in which the drive is to be used, its installation will require certain precautions and the use of appropriate accessories.

    Install the unit vertically:

    • Do not place it close to heating elements.

    • Leave sufficient free space to ensure that the air required for cooling purposes can circulate from bottom to the top of the unit.


    Mounting Types

    Type A mounting


    Type B mounting


    Type C mounting


    By removing the protective blanking cover from the top of the drive, the degree of protection for the drive becomes IP21. The protective blanking cover may vary according to the drive model, see opposite.


    Specific Recommendations for Mounting in an Enclosure

    To help ensure proper air circulation in the drive:

    • Fit ventilation grilles.

    • Check that there is sufficient ventilation. If there is not, install a forced ventilation unit with a filter. The openings and/or fans must provide a flow rate at least equal to that of the drive fans (refer to the product characteristics).

    • Use special filters with UL Type 12/IP54 protection.

    • Remove the blanking cover from the top of the drive.

    Sealed Metal Enclosure (IP54 Degree of Protection)

    The drive must be mounted in a dust and damp proof enclosure in certain environmental conditions, such as dust, corrosive gases, high humidity with risk of condensation and dripping water, splashing liquid, etc.This enables the drive to be used in an enclosure where the maximum internal temperature reaches 50°C.


  • Connections and Schema

    Recommended Wiring Diagram
    3-Phase Power Supply


    A1:
    ATV 212 drive
    KM1:
    Contactor
    Q1:
    Circuit breaker
    Q2:
    GV2 L rated at twice the nominal primary current of T1
    Q3:
    GB2CB05
    S1, S2:
    XB4 B or XB5 A pushbuttons
    T1:
    100 VA transformer 220 V secondary
    (1)
    Fault relay contacts for remote signalling of the drive status
    (2)
    Connection of the common for the logic inputs depends on the positioning of the switch (Source, PLC, Sink)
    (3)
    Reference potentiometer SZ1RV1202

    NOTE: All terminals are located at the bottom of the drive. Install interference suppressors on all inductive circuits near the drive or connected on the same circuit, such as relays, contactors, solenoid valves, fluorescent lighting, etc.

    Switches (Factory Settings)

    Voltage/current selection for analog I/O (VIA and VIB)


    Voltage/current selection for analog I/O (FM)


    Selection of logic type


    (1)
    negative logic
    (2)
    positive logic


    Other Possible Wiring Diagrams
    Logic Inputs According to the Position of the Logic Type Switch

    “Source” position


    “Sink” position


    “PLC” position with PLC transistor outputs


    (1)
    PLC


    (1)
    PLC

    2-wire control


    F:
    Forward
    R:
    Preset speed
    (2)
    ATV 212 control terminals

    3-wire control


    F:
    Forward
    R:
    Stop
    RES:
    Reverse
    (2)
    ATV 212 control terminals

    PTC probe


    (2)
    ATV 212 control terminals
    (3)
    Motor

    Analog Inputs

    Voltage analog inputs

    External +10 V


    (2)
    ATV 212 control terminals
    (4)
    Speed reference potentiometer 2.2 to 10 kΩ


    (2)
    ATV 212 control terminals

    Analog input configured for current: 0-20 mA, 4-20 mA, X-Y mA


    (2)
    ATV 212 control terminals
    (5)
    Source 0-20 mA, 4-20 mA, X-Y mA

    Analog input VIA configured as positive logic input (“Source” position)


    (2)
    ATV 212 control terminals

    Analog input VIA configured as negative logic input (“Sink” position)


    (2)
    ATV 212 control terminals


  • Performance Curves

    Derating Curves

    The derating curves for the drive nominal current (In) depend on the temperature, the switching frequency and the mounting type (A, B or C).

    For intermediate temperatures (45°C for example), interpolate between 2 curves.


    X
    Switching frequency