ATV11HU29M2E327 is replaced by:
Add to My Products Remove from My Products
The maximum number of products that can be compared is 4
- Reason for Substitution: End of life
- Substitution date: 01 April 2009
- Included in ATV12
Main range of productAltivar 11 product or component typeVariable speed drive product specific applicationSimple machine component nameATV11 application marketEuropean assembly styleWith heat sink EMC filterIntegrated built-in fanWith network number of phases1 phase [Us] rated supply voltage200...240 V (- 15...10 %) supply frequency50...60 Hz (- 5...5 %) motor power kW1.5 kW line current14.8 A 230 V 1 kA nominal output current6.8 A 230 V motor 4 kHz maximum transient current10.2 A 60 s power dissipation in W72 W at nominal load switching frequency2...16 kHz adjustable4...16 kHz with derating factor braking torque150 % of nominal motor torque with braking resistor at high inertia20 % of nominal motor torque without braking resistor at no load80 % of nominal motor torque with braking resistor at no load asynchronous motor control profileSensorless flux vector control with PWM type motor control signal electrical connectionTerminal 1.5 mm² AWG 14 AI1, RA-RC, LI1...LI4, DOTerminal 1.5 mm² AWG 14 L1, L2, L3, U, V, W, PA, PC supplyInternal supply for logic inputs 15 V +/- 15 % overload and short-circuit protectionInternal supply for reference potentiometer (2.2 to 10 kOhm) 5...5.25 V DC overload and short-circuit protection analogue input typeConfigurable current AI1 0...20 mA 250 OhmConfigurable current AI1 4...20 mA 250 Ohm without adding resistorConfigurable voltage AI1 0...10 V 40000 OhmConfigurable voltage AI1 0...5 V 40000 Ohm only with internal supply sampling duration20 ms AI1 analog20 ms LI1...LI4 discrete response time20 ms DO linearity error+/- 1 % output DO+/- 5 % input AI discrete input typeAssignable Ll1 forward 5000 Ohm 15 V 24 VAssignable Ll2 reverse 5000 Ohm 15 V 24 VAssignable Ll3/Ll4 4 preset speeds 5000 Ohm 15 V 24 V discrete input logicPositive logic (source) LI1...LI4, < 5 V (state 0), > 11 V (state 1) discrete output typeAssignable as external voltage DO 30 V max, 30 mAAssignable as internal voltage DOAssignable as open collector logic output DO 100 Ohm, 50 mA maxFactory set as PWM open collector output DO at 2 kHz 10 mA maxProtected relay logic RA-RC 1 NO minimum switching current10 mA 24 V DC RA-RC maximum switching current2 A 250 V AC inductive cos phi = 0.4 7 ms RA-RC2 A 30 V DC inductive cos phi = 0.4 7 ms RA-RC5 A 250 V AC resistive cos phi = 1 0 ms RA-RC5 A 30 V DC resistive cos phi = 1 0 ms RA-RC protection typeLine supply overvoltage driveLine supply undervoltage driveOvercurrent between output phases and earth driveOverheating protection driveShort-circuit between motor phases driveThermal protection motor frequency resolution0.1 Hz display unitConverter A/D, 10 bits analog input electromagnetic compatibility1.2/50 µs - 8/20 µs surge immunity test level 3 EN/IEC 61000-4-5Electrical fast transient/burst immunity test level 4 EN/IEC 61000-4-4Electrostatic discharge immunity test level 3 EN/IEC 61000-4-2Radiated radio-frequency electromagnetic field immunity test level 3 EN/IEC 61000-4-3 motor cable length10 m without additional EMC filter from 2 to 16 kHz EN 55011 class A group 110 m without additional EMC filter from 2 to 16 kHz EN 55022 class A group 120 m with additional EMC filter from 2 to 16 kHz EN 55011 class B5 m without additional EMC filter from 2 to 12 kHz EN 55011 class B5 m without additional EMC filter from 2 to 12 kHz EN 55022 class B50 m with additional EMC filter from 2 to 16 kHz EN 55011 class A group 1 vibration resistance1 gn 13...200 Hz EN/IEC 60068-2-61.5 mm peak to peak 3...13 Hz EN/IEC 60068-2-6 shock resistance15 gn 11 ms EN/IEC 60068-2-27 relative humidity5...93 % without condensation IEC 60068-2-35...93 % without dripping water IEC 60068-2-3 ambient air temperature for operation40...50 °C by removing the protective cover from the top of the drive50...60 °C by removing the protective cover from the top of the drive with current derating of 2.2 % per °C-10...40 °C without derating operating altitude<= 1000 m without derating> 1000 m with current derating 1 % per 100 m Complementary product destinationAsynchronous motors supply voltage limits170...264 V network frequency limits47.5...63 Hz speed drive output frequency0...200 Hz nominal switching frequency4 kHz speed range1...20 transient overtorque150...170 % of nominal motor torque regulation loopAdjustable frequencyFactory-set with the speed loop stability and gainPossible correction for machines with high resistive torque/inertia/fast cycles motor slip compensationAdjustablePreset in factory prospective line Isc1 kA output voltage<= power supply voltage insulationElectrical between power and control analogue input number1 discrete input number4 discrete output number2 acceleration and deceleration rampsLinear from 0 to 99.9 s braking to standstillBy DC injection insulation resistance> 500 MOhm markingCE operating positionVertical +/- 10 degree CAD overall width117 mm CAD overall height142 mm CAD overall depth156 mm outer dimension142 x 117 x 156 mm product weight1.8 kg Environment standardsEN 50178 product certificationsCSAC-TickN998UL IP degree of protectionIP20 ambient air temperature for storage-25...65 °C
No results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.