Main range of productAltistart 48 product or component typeSoft starter product destinationAsynchronous motors product specific applicationHeavy duty industry and pumps device short nameATS48 power supply voltage208...690 V (- 15...10 %) motor power kW15 kW at 230 V for severe applications30 kW at 400 V for severe applications30 kW at 440 V for severe applications37 kW at 400 V for standard applications37 kW at 440 V for standard applications37 kW at 500 V for severe applications37 kW at 525 V for severe applications45 kW at 500 V for standard applications45 kW at 525 V for standard applications45 kW at 660 V for severe applications45 kW at 690 V for severe applications55 kW at 660 V for standard applications55 kW at 690 V for standard applications18.5 kW at 230 V for standard applications motor power hp15 hp at 208 V for severe applications20 hp at 208 V for standard applications20 hp at 230 V for severe applications25 hp at 230 V for standard applications40 hp at 460 V for severe applications50 hp at 460 V for standard applications50 hp at 575 V for severe applications60 hp at 575 V for standard applications power dissipation in WFor standard applications 201 WFor standard applications 245 W utilisation categoryAC-53A type of startStart with torque control (current limited to 5 In) Icl nominal current75 A (connection in the motor supply line) for severe applications75 A (connection in the motor supply line) for standard applications IP degree of protectionIP20 Complementary assembly styleWith heat sink function availableExternal bypass (optional) power supply voltage limits177...759 V power supply frequency50...60 Hz (- 5...5 %) power supply frequency limits47.5...63 Hz device connectionIn the motor supply line factory setting current65 A [Uc] control circuit voltage110 - 15 % to 230 + 10 %, 50/60 Hz control circuit consumption30 W discrete output number2 discrete output type(LO1) logic output 0 V common configurable(LO2) logic output 0 V common configurable(R1) relay outputs fault relay NO(R2) relay outputs end of starting relay NO(R3) relay outputs motor powered NO output absolute accuracy precision+/- 5 % minimum switching currentRelay outputs 10 mA at 6 V DC maximum switching currentLogic output 0.2 A at 30 V DCRelay outputs 1.8 A at 230 V AC inductive load, cos phi = 0.5, L/R = 20 msRelay outputs 1.8 A at 30 V DC inductive load, cos phi = 0.5, L/R = 20 ms discrete input number5 discrete input typePTC, 750 Ohm at 25 °C(Stop, Run, LI3, LI4) logic, <= 8 mA 4300 Ohm discrete input voltage24 V (<= 30 V) discrete input logicPositive logic (Stop, Run, LI3, LI4) state 0 < 5 V and <= 2 mA, state 1 > 11 V and >= 5 mA starting currentAdjustable 0.4...1.3 Icl analogue output type(AO) current output 0-20 mA or 4-20 mA <= 500 Ohm communication port protocolModbus connector type1 RJ45 communication data linkSerial physical interfaceRS485 multidrop transmission rate4800, 9600 or 19200 bps max nodes number31 protection typePhase failure (line)Thermal protection (motor)Thermal protection (starter) markingCE type of coolingForced convection operating positionVertical +/- 10 degree height290 mm width190 mm depth235 mm product weight8.3 kg Motor power range AC-315...25 kW at 200...240 V 3 phases30...50 kW at 380...440 V 3 phases30...50 kW at 480...500 V 3 phases55...100 kW at 480...500 V 3 phases motor starter typeSoft starter Environment electromagnetic compatibilityConducted and radiated emissions conforming to IEC 60947-4-2 level AConducted and radiated emissions conforming to IEC 60947-4-2 level BDamped oscillating waves conforming to IEC 61000-4-12 level 3Electrostatic discharge conforming to IEC 61000-4-2 level 3Immunity to electrical transients conforming to IEC 61000-4-4 level 4Immunity to radiated radio-electrical interference conforming to IEC 61000-4-3 level 3Voltage/current impulse conforming to IEC 61000-4-5 level 3 standardsEN/IEC 60947-4-2 product certificationsDNVULNOM 117GOSTCCCTCFCSAC-TickSEPRO vibration resistance1 gn (f = 13...200 Hz) conforming to EN/IEC 60068-2-61.5 mm (f = 2...13 Hz) conforming to EN/IEC 60068-2-6 shock resistance15 gn for 11 ms conforming to EN/IEC 60068-2-27 noise level58 dB pollution degreeLevel 3 conforming to IEC 60664-1 relative humidity0...95 % without condensation or dripping water conforming to EN/IEC 60068-2-3 ambient air temperature for operation40...60 °C with current derating of 2 % per °C-10...40 °C without derating ambient air temperature for storage-25...70 °C operating altitude<= 1000 m without derating> 1000...2000 m with current derating of 2.2 % per additional 100 m Contractual warranty Warranty period18 months
Documents and DownloadsLanguage
CatalogueSizeAdd to My DocumentsUser guideSizeAdd to My DocumentsCADSizeAdd to My DocumentsCAD for ATS48D75Y: soft starter for asynchronous motor - ATS48 - 65 A - 208..690 V - 15..55 KW (Version 1.0)references ATS48D62Q, ATS48D75Q, ATS48D88Q, ATS48C11Q, ATS48D62Y, ATS48D75Y, ATS48D88Y, ATS48C11Y (Version 1.0)CertificateSizeAdd to My DocumentsDTM filesSizeAdd to My DocumentsEnd of Life InformationSizeAdd to My DocumentsMarine certificateSizeAdd to My DocumentsProduct Environmental ProfileSizeAdd to My Documents
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
(1) Right View
(2) Front View
Mounting and ClearanceClearance