regulated SMPS - 1 or 2 phase - 120..230 V AC - 24 V - 20AShow more characteristics
- Reason for Substitution: End of life
- Substitution date: 08 January 2013
Main range of productPhaseo product or component typePower supply power supply typeRegulated switch mode input voltage120...230 V AC phase to phase, terminal(s): L1-L2120...230 V AC single phase, terminal(s): N-L1300...370 V DC output voltage24 V DC rated power in W480 W power supply output current20 A output protection typeAgainst short-circuits, protection technology: automatic resetAgainst overload, protection technology: 33 VThermalAgainst overvoltage ambient air temperature for operation-20…45 °C (without)45…60 °C (with rated power derating 8 W per °C) Complementary input voltage limits90...132 V185...264 V network frequency47...63 Hz inrush current35 A cos phi0.75 efficiency90 % at 120 V AC92 % at 230 V AC output voltage limits100...116 % adjustable power dissipation in W55 W43 W current consumption4.4 A at 230 V8.4 A at 120 V line and load regulation+/- 0.5 % holding time>= 12 ms at 120 V>= 30 ms at 230 V permissible temporary current boost1.5 x In (for 5 seconds) connections - terminalsFor input connection: screw type terminals, connection capacity: 2 x 0.5...2 x 4 mm² AWG 24...AWG 10For input ground connection: screw type terminals, connection capacity: 1 x 0.5...1 x 4 mm² AWG 24...AWG 10For voltage selection connection: screw type terminals, connection capacity: 2 x 0.5...2 x 4 mm² AWG 24...AWG 10For output connection: screw type terminals, connection capacity: 2 x 0.5...2 x 4 mm² AWG 24...AWG 10For diagnostic relay: screw type terminals, connection capacity: 2 x 0.5...2 x 4 mm² AWG 24...AWG 10 markingCE mounting support35 x 15 mm symmetrical DIN rail35 x 7.5 mm symmetrical DIN rail operating positionVertical output couplingRedundant parallel (internal diode)Series name of testElectrostatic discharges conforming to EN/IEC 61000-4-2Induced electromagnetic field conforming to EN/IEC 61000-4-6Magnetic field conforming to EN 61000-4-8Primary outage conforming to IEC 61000-4-11Radiated electromagnetic field conforming to EN/IEC 61000-4-3Rapid transient conforming to IEC 61000-4-4Surge conforming to EN/IEC 61000-4-5Radiated emissions conforming to EN 55011 class AConducted emissions on the power line conforming to EN 55011 class A status LED1 LED (green)output voltage (> 21.6 V): 1 LED (red)overload, overtemperature, overvoltage: depth139 mm height127 mm width80 mm net weight1.3 kg Environment product certificationsCSA C22-2 No 14CULus 508 standardsCULus 508 environmental characteristicEMC conforming to EN 50081-1EMC conforming to EN 50082-2EMC conforming to EN/IEC 61000-6-2Safety conforming to EN/IEC 60950Safety conforming to SELV IP degree of protectionIP20 conforming to EN/IEC 60529 ambient air temperature for storage-25…80 °C relative humidity0…90 % during operation0…95 % in storage overvoltage categoryClass I conforming to VDE 0106-1 dielectric strength1500 V between input and ground3000 V between input and output500 V between output and ground Contractual warranty Warranty18 months
CADSizeAdd to My DocumentsCAD file (on TraceParts) for ABL4RSM24200: regulated SMPS - 1 or 2 phase - 120..230 V AC - 24 V - 20A (Version 2.0)
Technical FAQsNo results found.Unfortunately, related FAQs are unavailable due to temporary technical issues. Please try again later.
Dimensions DrawingsABL4RSM240•••/4RSM24100/4WSR24••• Power SuppliesDimensions
Mounting and ClearanceABL4RSM240•••/4RSM24100/4WSR24•••Clearance
Connections and SchemaWiring RequirementsCable Types and Wire SizesInput VoltageOutputs Connected in ParallelParalleling
SELV: Safety Extra Low Voltage
Use maximum of 2 power supplies with the same reference.
For correct current share (±20%) between devices in parallel, adjust VOUT ±20 mV applying a load > PNOM x 0.2 to all ABL4 before connecting them in parallel.
Safety Extra Low Voltage in accordance to IEC/EN 60950 and IEC/EN 50178 standards.PELV: Protection Extra Low Voltage