Global (English)
Welcome to the Schneider Electric corporate Website


You can choose another country to view available products or go to our Global website for company information.

Choose your country or region


EVlink Wallbox

Charging stations for home or private properties (indoors or outdoors)

The EVlink Wallbox is weatherproof and robust. Thus it can be used in tough environments: in homes and on private properties (condominium, corporate car park, hotel...).The range is made of Wallbox Standard and Wallbox Plus. In addition to functions available in Wallbox Standard, Wallbox Plus is provided with a built-in protection against residual direct currents, and a TIC interface with French utility meters intended to avoid the risk of tripping of the connection to the electrical grid.

EVlink Wallbox
  • Features

    > Discover our residential charging stations

    Charging control 
    > Simply connect the vehicle to the charging station: charging can start without specific action.
    > Charging can be stopped and then restarted using the Stop/Start button.
    > As per the selected mode the charging start can be deferred in off-peak hours or the charging current can be limited (16 A to 10 A, 32 A to 16 A), by any energy management device providing that this device is able to close a potential-free contact wired to the Wallbox.
    > Wallbox Plus can be connected to the TIC (Télé-Information Client) output of French utility meters in single-phase residential to automatically adjust the maximum charging current at any time according to the available current in the home. Thus, the risk of tripping of the connection to the grid is avoided.
    AThe charging power can be limited by any energy management device providing that this device is able to close a potential-free contact wired to the Wallbox.

    Protection against residual currents
     > Wallbox Plus is fitted with a residual direct current detecting device (RDC-DD). In single-phase and three-phase the protection against residual currents can be a A type RCD instead of a B type. Please refer to the national standard in the few countries where the provisions of the installation standard IEC/HD 60364-7-722 in force are not applied.
    > Wallbox Standard requires a B type RCD in single-phase and three-phase. Please refer to the national standard. It is recommended to use the Schneider Electric “Acti9 iID B type for EV”, or if not available in the country the “Acti9 iID B-SI type”.

    Characteristics of the power supply network
    > 220-240 V single-phase - 50/60 Hz for 3.7 and 7.4 kW charging powers.
    > 380-415 V three-phase - 50/60 Hz for 11 and 22 kW charging powers.
    > Earthing system: TT, TN-S, TN-C-S or IT.

    Mechanical and environmental characteristics
    > Ingress protection code: IP54.
    > Impact protection code: IK10.
    > Operating temperature: -30°C to +50°C.
    > Storage temperature: -40°C to +80°C.
    > Optional attached cable length: 4 m.

    Access control
    > By key lock.

    > 24 months for the entire EVlink range.


    Extensive choice: 14 versions of Wallbox Standard and additional 14 versions of Wallbox Plus
    > Maximum charging power: 3.7, 7.4, 11 or 22 kW.
    > T2 Socket outlet with or without shutter, or attached cable with T1 or T2 connector.
    > High robustness of T2 socket outlet with or without shutters thanks to silver plated contacts avoiding overheat.

    Fast installation
    > Installation in less than 30 minutes by a single person.
    > Incoming power cable from the top, from the bottom or from the rear.

    Space saving in the electrical switchboard
    > Wallbox Plus allows a A type residual current device to be used instead of a B type, which means saving space in the electrical switchboard.


    > High protection against mechanical impacts: IK10.
    > Suitable for outdoor use: IP54.

    Easy to use
    > "Plug & charge".
    > One-touch stop/restart.
    > Possibility to wrap the attached cable around the charging station to store it when it is no longer used.
    > Technical documentation: installation instructions and quick start guide available in different languages.

    Energy management option
    > As per the selected mode, deferred start to charge only during off-peak hours or temporary current limitation (from 16 A to 10 A or from 32 A to 16 A) to reduce the overall building consumption.
    > The option can be activated through an external contact hardwired to the charging station.
    > With Wallbox Plus connected to the TIC output (Télé-Information Client) of single-phase French utility meters, the maximum charging current is permanently adjusted according to the available power in the home, to avoid the risk of tripping of the connection to the electrical grid.


    EVlink Wallbox charging stations can be used at home (individual house or condominium), as well as in private and semi-public car parks (public covered car parks, corporate car parks, hotel …)


    • At private parking area
    • At home
    • At home condominium