Acti 9 Reflex iC60 DIN rail integrated control circuit breaker offers absolute safety and enhanced continuity of service with:
VisiSafe for entirely secure operation and maintenance operations on circuits.
Class-2 insulation: permanent safety for operators and non-qualified personnel.
VisiTrip for rapid detection of faulty outgoers and reduced intervention times.
Direct interface with a PLC thanks to integrated electrical auxiliaries for maximum compatibility with Building Management Systems (BMS).
Integrated padlocking facility offering maximum safety for maintenance operations.
Add-on Residual Current Devices (RCDs) from the Acti 9 range, entirely immune to interference: enhanced continuity of service, particularly in polluted networks and environments.
Integrated remote control with three modes of operation for maximum flexibility and upgradeability of the electrical installation.
Rated current: 10, 16, 25, 40 and 63 A
Breaking capacity: 10 kA for the Reflex iC60 N version and 15 kA for the Reflex iC60 H version
Tripping curves: B, C, D
Compliance with standard IEC/EN 60947-2, certified by official national bodies
Complete coordination with the RCDsof the Acti 9 range and the Compact NSX MCCBs
Suitability for isolation in compliance with industrial standard IEC/EN 60947
Voltage rating: up to 400 Vac, insulation voltage: 500 V
Add-on residual current devices (optional): Vigi iC60 and Quick Vigi
Integrated auxiliaries: potential-free contacts for status and operation (OF and SD)
Auxiliaries (optional): 24/48V DC-AC power adapter
For more information click here
Reflex iC60 is a unique concept that combines the following functions: - Circuit protection against short-circuit currents - Circuit protection against overload currents - Isolation in compliance with industrial operation requirements - Remote control by latched and/or impulse-type order - Indication of Open/Closed and Fault status via potential-free contacts - Interface for link with PLC or BMS (as per IEC 61131) - Mixing and typing of control orders via simplified configuration
Absolute safety of circuit protection with VisiSafe,
control mode flexibility,
ease of installation in a control environment with direct interface to PLC or BMS,
Greater continuity of service with VisiTrip,
Easy to install with up to 50% less wiring,
environmentally friendly with 100% recyclable and recoverable components
Low voltage final distribution
protection and control of electric lighting circuits in all industrial and commercial buildings and infrastructures
protection and remote control of non-priority circuits as part of a load shedding process
protection and remote control of most electrical loads with very few switching operations
particularly suited to 230 Vac remote control and conventional signalling or via a very low voltage interface for linking with a PLC or BMS