Technical FAQs

Ask a Question

How to activate the site Manager with Vijeo XD runtime

In Vijeo XD builtime
In order to include the SiteManager software in the HMI RunTime, do the following action:
  •  In System Architecture, select the HMI target, then click on the "tab" Advanced and "Data Access" then select the icon "Secure remote access", in Transfer Method


Add the hardware configuration toolchest in one Panel

In Vijeo VX Runtime for Windows OS
Even when the SiteManager software is installed/preinstalled, it is not started by default at startup of Windows OS.

In order to start the SiteManager software, turn off the write filter (Windows OS EWF feature for filesystem protection), then click "All Programs ? Schneider-Electric, SiteManager Embedded, Start SiteManager Embedded" in Windows "Start" menu.

The SiteManager is then started. Since then, the SiteManager software is automatically started at startup of Windows OS.
In order to prevent the SiteManager software to start, turn off the write filter (Windows OS EWF feature for filesystem protection), then click "All Programs ? Schneider-Electric, SiteManager Embedded, Stop SiteManager Embedded" in Windows "Start" menu.

The SiteManager is then stopped. Since then, the SiteManager software is not started at startup of Windows OS.


In Vijeo XD runtime
In the "Hardware Configuration" page, in the "Remote Access Management" section:
  • In order to start the SiteManager software, click on button "Enable"
  • In order to start the SiteManager software, click on button "Disable"
Was this helpful?
What can we do to improve the information ?