Technical FAQs

Ask a Question

What would cause the ATV320 drive to power up with a blank display?

Issue:
What would cause the ATV320 drive to power up with a blank display?

Product Line:
ATV320

Environment:
All

Cause:
Power board is inoperative or rectifier circuit is inoperative

Resolution:
Troubleshooting 
Check Line voltage on L1 L2 L3 make sure its balanced and correct
Check the DC bus voltage on PA and PC it should be line voltage X the Square root of 2
Check the +24vdc supplies if there are any wires connected try and remove the wiring and check to see if something is shorting out the supply. 

Drive will need to be  replaced if its found to be inoperative. 
Was this helpful?
What can we do to improve the information ?